Instrukcja obsługi AvaTemp 914DPT450AD

AvaTemp termometr 914DPT450AD

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla AvaTemp 914DPT450AD (1 stron) w kategorii termometr. Ta instrukcja była pomocna dla 6 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/1
#914DPT450AD
Digital Waterproof Thermometer
INSTRUCTION SHEET
BEFORE USE:
1. Carefully remove plastic strip from battery compartment.
This is included to preserve battery life.
2. Remove film from LCD display.
INSTRUCTION:
1. Press the ON/OFF button to turn on. Hold the ON/OFF
button for 4 seconds to turn off (the thermometer will
automatically turn off after 10 minutes of inactivity).
2. After turning on, press the button again to ON/OFF
activate the backlight feature. Press again to turn off the
backlight feature. The backlight feature will automatically
turn off after 10 seconds to save battery.
3. Select temperature mode by pressing the button.°F/°C
4. Insert probe at least 1" into food for an accurate reading.
HOLD MODE:
1. While the probe is in food, press the button to HOLD
hold the current temperature reading. “HOLD” will appear on
the screen.
2. Press the button again to exit the hold mode.HOLD
MIN / MAX MODE:
1. Press the button to display the highest MAX/MIN
temperature stored. “MAX” will appear on the display.
2. Press the button again to display the lowest MAX/MIN
temperature stored. “MIN will appear on the display.
3.
Press the MAX/MIN button again to exit the max/min mode.
4. To reset the max memory, press and hold the MAX/MIN
button for 4 seconds when in the max mode. Press the
button again to enter the min mode and MAX/MIN
repeat steps to reset the min memory.
CALIBRATION MODE:
1. Insert the probe into a mixture of 3 parts ice and 1 part water.
2. Press the button for 4 seconds and release the CAL CAL
button when the temperature reads 32.0°F / 0˚C.
The calibration is complete.
Note: This function will only work if the temperature
is between 30 and 34 degrees Fahrenheit, or -1 and 1
degrees Celsius. If the temperature is outside of this range,
“ERR” will display for 2 seconds, and then return to the
temperature mode.
CLEANING AND CARE:
1. This thermometer is waterproof with a rating of IP67.
For long-lasting use, hand wash or place in a low
temperature dishwasher.
2. Do not leave in an oven during cooking.
3. Magnet and lanyard included for storage.
BATTERY INFORMATION:
1. (1) CR2032 3V lithium battery is included. To change the
battery, use a coin to turn the cover counterclockwise and
align the arrow on the cover with the arrow next to the
unlock symbol.
2. Remove the battery cover and replace the old battery with
a new battery, + side facing up.
3. Return the battery cover with the arrow aligned with the
arrow next to the unlock symbol.
4. Use a coin to turn the cover clockwise and align the arrow
with the arrow next to the lock symbol.
Note: If the battery cover is not closed completely, water can
enter the battery compartment and cause the thermometer to
not function properly.
1 YEAR LIMITED WARRANTY
AvaTemp warrants its products to be free from defects in material
and workmanship for 1 year.


Specyfikacje produktu

Marka: AvaTemp
Kategoria: termometr
Model: 914DPT450AD

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z AvaTemp 914DPT450AD, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje termometr AvaTemp

Instrukcje termometr

Najnowsze instrukcje dla termometr

Auriol

Auriol H14269 Instrukcja

15 Października 2024
Medel

Medel ECOtemp Instrukcja

9 Października 2024
Medel

Medel No Contact Plus Instrukcja

9 Października 2024
Medel

Medel Flexo Instrukcja

9 Października 2024
Owon

Owon TI300 Instrukcja

8 Października 2024
Innoliving

Innoliving INMD-DMT-437 Instrukcja

8 Października 2024