Instrukcja obsługi Avantco SL309

Avantco maszyna do cięcia SL309

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Avantco SL309 (15 stron) w kategorii maszyna do cięcia. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/15
1 www.AvantcoEquipment.com
Models: SL309, SL310, SL312, SL512, SL713
09/2022
2 www.AvantcoEquipment.com
Unpack the product and check for any damage incurred during transit. This should be reported to the responsible
carrier, railway or postal authority, and a request for a damage report should be made.
The Avantco Auto/Manual slicer is a medium duty electrically driven appliance. The unit has been designed to meet the
highest safety and hygiene standards. The robust aluminum construction and powerful drive motors ensure long and
reliable operation and use.
1. Place the unit in the desired location with the on/off switch facing the operator. DO NOT plug the unit in at this point.
The supporting table should be stable and at the correct working height. The work surface should be in a dry location
and preferably away from heavy trafc areas.
2. Clean the unit with a DAMP cloth using a neutral P.H. dish detergent. Wipe and dry the machine. (See Cleaning in-
structions on page 3 of this manual.
3. Set the thickness of slice required using the control knob adjacent to the on/off switch.
4. The meat support platform should be in the start position that is close to the operator. Lift up the food pusher; place
the meat to be sliced on the support platform against the raw edge. Return the food pusher to its original position
now on top of the meat to be sliced.
5. Switch on the motor, and using the handle on the food pusher, push the carriage back and forth to begin cutting the food.
6. After you arenished cutting, turn off machine and collect the product slices in the exit area.
7. Please Note: The blade-sharpening device is NOT factory tted on MODELS SL310, SL312 SL512 AND SL713MAN. To t,
follow the procedure below.
a) Fit the sharpening device in the socket provided, ensuring the grinding stones are positioned at the rear of the machine.
b) Tighten the safety locking screw.
To replace the belt, please remove the knife and motor, then remove belt through the hole under the knife. Then, install the
new belt and reassemble.
!
Cut through the greasiest dishes, glassware, cutlery, pots, and pans with Sunbright pot
and pan dishwashing liquid. This heavy-duty pot and pan dishwashing liquid was specially
designed for the institutional environment with its super concentrated, high active, high
sudsing formula. Available in 32 oz. bottles (12/case) or 5 gallon bulk supply.
3 www.AvantcoEquipment.com
1. The units are designed to operate an alternating current (A.C) only. DO NOT CONNECT TO DIRECT CURRENT (D.C).
2. Please ensure that the power supply cord does not come into contact with hot surfaces.
3. If the supply cord is damaged, it must be replaced with a new cord assembly. (Available from the suppliers agent.)
4. The appliance must only be used for its intended purpose.
5. It is strongly suggested that the operators of this machine wear close tting clothes. It is essential when blade
maintenance or cleaning is undertaken that suitable hand protection gloves are used.
6. ALWAYS unplug the slicer before undertaking cleaning or maintenance of the unit.
7. These machines must be operated by trained personnel and should never be used by unskilled operators or children.
8. The blade must be replaced when it has reduced in size by 5mm.
LubriQuik food grade silicone spray lubricant is ideal for use on virtually any equip-
ment or machinery that makes contact with food, such as slicers, conveyor sys-
tems, bottling and canning machinery, bakery equipment, and dairy equipment.

Specyfikacje produktu

Marka: Avantco
Kategoria: maszyna do cięcia
Model: SL309

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Avantco SL309, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje maszyna do cięcia Avantco

Avantco

Avantco SL309 Instrukcja

16 Września 2024
Avantco

Avantco SL310 Instrukcja

13 Września 2024
Avantco

Avantco SL312 Instrukcja

11 Września 2024

Instrukcje maszyna do cięcia

Najnowsze instrukcje dla maszyna do cięcia

Royal Catering

Royal Catering RCAM-250E Instrukcja

14 Października 2024
Royal Catering

Royal Catering RCAM-250PRO Instrukcja

14 Października 2024
Royal Catering

Royal Catering RCAM-250EXPERT Instrukcja

14 Października 2024
Princess

Princess Classic Multi Food Slicer 492977 Instrukcja

10 Października 2024
Melissa

Melissa 16220009 Instrukcja

9 Października 2024
Severin

Severin AS 3914 Instrukcja

9 Października 2024
Graef

Graef S52200 Instrukcja

8 Października 2024
Cigweld

Cigweld COMET Instrukcja

8 Października 2024
RGV

RGV Luxury 25 Instrukcja

8 Października 2024
Weston

Weston 36-3551-W Instrukcja

8 Października 2024