Instrukcja obsługi Autel MaxiVideo MV480

Autel nieskategoryzowany MaxiVideo MV480

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Autel MaxiVideo MV480 (51 stron) w kategorii nieskategoryzowany. Ta instrukcja była pomocna dla 26 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/51
i
Trademarks
Autel®, MaxiSys®, MaxiCheck®, MaxiDAS®, MaxiDiag®,
MaxiRecorder®, MaxiScan®, and MaxiTPMS® are trademarks of Autel
Intelligent Technology Corp., Ltd., registered in China, the United States
and other countries. All other marks are trademarks or registered
trademarks of their respective holders.
Copyright Information
No part of this manual may be reproduced, stored in a retrieval system
or transmitted, in any form or by any means, electronic, mechanical,
photocopying, recording, or otherwise, without the prior written
permission of Autel.
Disclaimer of Warranties and Limitation of Liabilities
All information, specications and illustrations in this manual are based
on the latest information available at the time of printing.
Autel reserves the right to make changes at any time without notice.
While information of this manual has been carefully checked for
accuracy, no guarantee is given for the completeness and correctness of
the contents, including but not limited to the product specications,
functions, and illustrations.
Autel will not be liable for any direct damages or for any special,
incidental, or indirect damages or for any consequential economic
damages.
IMPORTANT
Before operating or maintaining this unit, please read this manual
carefully, paying extra attention to the safety warnings and precautions.
For Services and Support
http://pro.autel.com
www.autel.com
1-855-288-3587/1-855-AUTELUS (North America)
0086-755-86147779 (China)
Support@autel.com
For technical assistance in all other markets, please contact your local
selling agent.
ii
Safety Instructions
To prevent personal injury or damage to vehicles and/or the inspection
tool, read this instruction manual rst and observe the following safety
precautions at a minimum whenever working on a vehicle.
Work Area Safety
Always perform automotive testing in a safe environment.
Keep clothing, hair, hands, tools, test equipment, etc. away from
all moving or hot engine parts. The cable shall be operated under
60 °C (140 °F).
Operate the tool in a well-ventilated work area.
Do not operate the tool in a potentially combustive atmosphere,
such as in the presence of ammable liquids, gases, or heavy dust.
Keep a re extinguisher for use on gasoline/chemical/electrical
res nearby.
Do not use the tool around corrosive chemicals.
Keep bystanders, children and visitors away vehicle testing area.
Keep the tool dry, clean, free from oil, water and grease. Use a
mild detergent on a clean, damp cloth to clean the outside of the
tool when necessary.
Electrical Safety
Keep the tool away from grounded surfaces such as pipes,
radiators, ranges and refrigerators.
Do not expose the tool to rain or wet conditions. Water entering
the tool will increase the risk of electric risk.
iii
Do not unplug the tool from the electrical outlet by pulling on
electrical cord. Never carry tool by cord. Keep cord away from
heat, oil, sharp edges or moving parts.
If operating the tool in a damp location is unavoidable, use a
ground fault circuit interrupter (GFCI) to protect the tool from
damage and the operator from injury.
Personal Safety
Do not use the tool while tired or under the influence of drugs,
alcohol, or medications. A moment of distraction can result in
serious personal injury.
Do not over-reach. Keep proper footing and balance at all times.
Proper footing and balance enable better control of the tool in
unexpected situations.
Always wear safety eye protection that meets ANSI standards.
Do not wear loose clothing or jewelry. Keep your hair, clothing,
and gloves away from moving parts.
Do not place the tool on any unstable cart or surface. The tool may
fall causing serious injury to a person or serious damage to the tool
itself.
Do not have liquids near the tool. Liquid increases the risk of
electric shock and damage to the tool.
Do not use the tool for personal or medical use.
The product is not shock-resistant. Handle it with care and be
careful not to drop it.

Specyfikacje produktu

Marka: Autel
Kategoria: nieskategoryzowany
Model: MaxiVideo MV480

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Autel MaxiVideo MV480, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje nieskategoryzowany Autel

Autel

Autel MaxiVideo MV480 Instrukcja

20 Maja 2024
Autel

Autel DiagLink Instrukcja

8 Maja 2024
Autel

Autel MaxiService MST505 Instrukcja

6 Maja 2024
Autel

Autel MaxiScan MS300 Instrukcja

6 Maja 2024

Instrukcje nieskategoryzowany

Najnowsze instrukcje dla nieskategoryzowany

Meec Tools

Meec Tools 010-084 Instrukcja

6 Października 2024
Outwell

Outwell Scenic Road 250 Instrukcja

5 Października 2024
Impact

Impact Qualite QL-3560-LED Instrukcja

4 Października 2024
Impact

Impact QuikBalance Instrukcja

4 Października 2024
Impact

Impact CA-112 Instrukcja

4 Października 2024
Impact

Impact Forever Ready Cool FRC-24-LED Instrukcja

4 Października 2024
Impact

Impact LS-BHA Instrukcja

4 Października 2024
Impact

Impact LKB-5C Instrukcja

4 Października 2024
Impact

Impact Varipole Drop Ceiling Adapter Instrukcja

4 Października 2024
Impact

Impact RST-001 Instrukcja

4 Października 2024