Instrukcja obsługi ATN Night Spirit XT 2

ATN Lornetka Night Spirit XT 2

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla ATN Night Spirit XT 2 (8 stron) w kategorii Lornetka. Ta instrukcja była pomocna dla 8 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/8
AMERICAN
TECHNOLOGIES
NETWORK
CORP.
Important Export Restrictions! Commodities, products,
technologies and services contained in this manual are
subject to one or more of the export control laws and
regulat io ns of the U.S. Government an d they fall
under the control jurisdiction of either the US Depart-
ment of State or the US BIS-Department of Commerce. It
is unlawful and strictly prohibited to export, or attempt to
export or otherwise transfer or sell any hardware or
technical data or furnish any service to any foreign per-
son, whether abroad or in the United States, for which a
license or written approval of the U.S. Government is re-
quired, without first obtaining the required license or written
approval from the Department of the U.S. Government hav-
ing jurisdiction. Diversion contrary to U.S. law is prohibited.
u s e r ’ s g u i d e
ATN Night Spirit XT
NIGHT VISION MONOCULAR
MANUAL (NIGHT SPIRIT XT) REVISION 1 - JANUARY, 2013
The information in this manual furnished for information use only, is subject to change without notice,
is not to be construed as a commitment by ATN Corp.
ATN Corp. assumes no responsibility or liability for any errors or inaccuracies that may appear in this book.
©2013 ATN Corp. All right reserved.
THIS PRODUCT CONTAINS NATURAL RUBBER LATEX WHICH MAY CAUSE ALLERGIC REACTIONS.
CAUTION :
3 m to infinity focus
50 mm F 1:1.2 lens for maximum clarity
Bright light sensor
On/Off Infrared
illuminator
On/Off Power
On/Off
Power
On/Off Infrared
illuminator
Bright
light sensor
±5 Diopter Adjustment
Rotating rubber eyepiece
AVAILABLE IN
2, CGT, WPT GEN.
AVAILABLE IN
HPT, 3, 3A, 3P, 4 GEN.
Built-in infra-red
illuminator
Battery Cap
CAMERA-ADAPTER
(OPTIONAL)
SPECIFICATIONS
Magnification ............................... 3X (optional 5X)
Lens System ................................ 50mm F1:1.2
Field of view ................................. 18°
Diopter adjustment ....................... ±5
Range of Focus ............................ 3m to infinity
Power Supply ............................... 3V CR123A Lithium battery
Battery Life ................................... 30 hours (15 hours w/IR illuminator)
Operating Temperature ................ -40°C to +50°C
Storage Temperature ................... -50°C to +70°C
Weather resistant ......................... Yes
Dimensions .................................. 212 x 58 x 75 mm/8.4 x 2.3 x 3” (2, CGT, WPT Gen.)
175 x 58 x 75 mm/6.9” x 2.3” x 3” (HPT, 3, 3A, 3P, 4 Gen.)
Weight .......................................... 0.62 kg / 1.37 lbs
0.58 kg / 1.28 lbs
* ATN reserves the right to change the above specifications at any time without notice
2
APPLICATION
The Night Spirit XT is rugged and lightweight night vision monocular. It utilizes multicoated
optics specially coated to gather light to provide bright and clear images. Couple these optics
with state of the art quality image intensifier tubes and the Night Spirit XT is an excellent com-
pact pocket scope. The Night Spirit XT is an amazing combination of versatility, performance,
and price.
The night vision monocular is a complex electro-optical system for individual Night Spirit XT
use. The device consists of the objective lens assembly, eyepiece and the body. The body
contains an image intensifier tube assembly with an integrated high voltage power source and
the battery housing.
Objective lens protective cover is intended to protect the objective lens from dust and
scratches. It also acts as a daylight filter, allowing you to test the scope in daylight or other
bright light situations. The pinhole in the center of the protective cover allows the user to check
the operation ability of the device in daylight conditions.
The headgear of goggle kit secures the goggles to the user’s head for night viewing, and pro-
vides freehand support for use with a weapon, protective mask or other purposes. It is adjust-
able and cushioned.
NOTE: Do not test the scope in daylight conditions even with the daylight filter/lens cap on for
more than ten (10) minutes.
BATTERY INSTALLATION
Install CR123A batteries as follows:
1. Unscrew the battery cap[1].
2. Insert the battery [2], observing the polarity as indicated.
3. Replace the battery cap and screw cap hand tight.
1
2
• HighQualitylightintensifiertube
• Widevarietyofimagetubeconfigurations
to choose from
• 3xmulti-coatedlenses
• Superfastlenssystemprovidestheuser
with a clear and sharp image
• Built-inInfra-Redilluminatorletsyousee
even in total darkness
• Ruggedandergonomicdesign
• Camera/camcorder-adaptable
• Usesone3vLithiumbattery
• Weatherresistant
• LimitedTwo-YearWarranty
FEATURES

Specyfikacje produktu

Marka: ATN
Kategoria: Lornetka
Model: Night Spirit XT 2

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z ATN Night Spirit XT 2, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Lornetka ATN

ATN

ATN BinoX-4K Instrukcja

16 Września 2024
ATN

ATN DNVM-6 Instrukcja

9 Września 2024
ATN

ATN PS31 Instrukcja

5 Września 2024
ATN

ATN Night Spirit XT 2 Instrukcja

5 Września 2024

Instrukcje Lornetka

Najnowsze instrukcje dla Lornetka

Pentax

Pentax 7x20 DCF Instrukcja

15 Października 2024
Auriol

Auriol Z31117 Instrukcja

12 Października 2024
Armasight

Armasight 8x36 Instrukcja

10 Października 2024
Kodak

Kodak BCS400 Instrukcja

9 Października 2024
Kodak

Kodak BCS600 Instrukcja

9 Października 2024
Steiner

Steiner Nighthunter S35 Gen II Instrukcja

8 Października 2024
Steiner

Steiner M1050 LRF Instrukcja

8 Października 2024
Steiner

Steiner HX 10x42 Instrukcja

8 Października 2024
Steiner

Steiner Nighthunter H35 Gen 1 Instrukcja

8 Października 2024
Steiner

Steiner Nighthunter C35 Gen I Instrukcja

8 Października 2024