Instrukcja obsługi Atlas Sound DSP2212

Atlas Sound system hi-fi DSP2212

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Atlas Sound DSP2212 (16 stron) w kategorii system hi-fi. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/16

– 1 – AtlasSound.com

Specifications are subject to change without notice.

Owner’s Manual DSP2210 &

DSP2212

1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.

Telephone: 800.876.3333 • Fax: 800.765.3435

AtlasSound.com – 2 –

Specifications are subject to change without notice.

Owner’s Manual

DSP2210 &

DSP2212

1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.

Telephone: 800.876.3333 • Fax: 800.765.3435

Important Safety Instructions

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this device near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves, or other devices (including amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the

other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your

safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they

exit from the device.

11. Only use attachments/accessories specified by the manufacturer.

12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the device. When a cart is used

use caution when moving the cart/device combination to avoid injury from tip-over.

13. Unplug this device during lightning storms or when unused for long periods of time.

14. Refer all servicing to qualified service personnel. Servicing is required when the device has been damaged in any way, such as

power-supply cord or plug is damaged, liquid has been spilled, or objects have fallen into the device, the device has been exposed

to rain or moisture, does not operate normally, or has been dropped.

15. WARNING: To reduce the risk of fire or electric shock, this device should not be exposed to rain or moisture and objects filled with

liquids, such as a vase, should not be placed on this device.

16. To completely disconnect this equipment from the mains, disconnect the power supply cord plug from the receptacle.

17. The mains plug of the power supply cord shall remain readily operable.

RISK OF ELECTRIC SHOCK

DO NOT OPEN

ATTENTION RISQUE DE DECHARGE ELECTRIQUE

-NE PAS OUVRIR.

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK

DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

CAUTION

The lightning flash with arrowhead symbol within an

equilateral triangle, is intended to alert the user to the

presence of uninsulated “dangerous voltage “ within the

product’s enclosure that may be of sufficient magnitude

to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is

intended to alert the user to the presence of important

operating and maintenance (servicing) instructions in the

literature accompanying the product.

Table of Contents

Important Safety Instructions ......................................................................................................................................... 2

Introduction 4 .....................................................................................................................................................................

System Overview Flow Diagram 5 ....................................................................................................................................

Panel Layout ..................................................................................................................................................................... 6

Installation and Endpoint Termination 7 ...........................................................................................................................

Software Installation and Setup ...................................................................................................................................10

Specifications 14 ................................................................................................................................................................

Troubleshooting Guide 15 .................................................................................................................................................

Warranty .........................................................................................................................................................................16

– 3 – AtlasSound.com

Specifications are subject to change without notice.

Owner’s Manual

DSP2210 &

DSP2212

1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.

Telephone: 800.876.3333 • Fax: 800.765.3435

CAUTION – When Installing the Product

• Plugging in or unplugging the power cord with wet hands may result in electric shock.

• Never move the device with the power cord plugged into the wall, as damage to the power cord may result.

• When unplugging the cord from the wall, grasp the plug, NOT the cord.

• Never install this device in humid or dusty locations, nor in direct sunlight, near sources of heat, or in areas where sooty smoke or

steam are present. Fire and electric shock may result.

• Keep all sides of the device at least 3

1⁄2" away from objects that may obstruct air flow to prevent the unit's internal temperature rise.

WARNING – When the Device is in Use

• To prevent electric shock, do not remove the device cover as there are high voltage components inside. Refer all servicing to Atlas Sound.

• Should any of the following irregularities occur during use, immediately switch off the power, disconnect the power cord from the

AC outlet and contact Atlas Sound. Do not to attempt to continue operation with the device as this may cause fire or electric shock:

• Smoke or strange smell coming from the unit.

• If the device falls or the case is damaged.

• If water or any metallic objects falls into the device.

• If the power supply cord is damaged in any way.

• If the device is malfunctioning.

• Do not insert or drop metallic objects or flammable materials into the ventilation holes of the device's cover,

as this may result in electric shock or fire.

• Do not place any containers with liquid or metallic objects on the top of the device.

If any liquid spills into the unit, fire or electric shock may result.

• Never operate this device or touch the power supply cord during an electrical storm, electric shock may result.

• Never exceed the wattage on the product when connecting equipment. Fire and/or property damage may result.

• Operate the device only with the voltage specified on the unit. Fire and/or electric shock may result if a higher

voltage is used.

• Do not modify, kink, or cut the power cord. Do not place the power cord in close proximity to heaters and do not

place heavy objects on the power cord, including the device itself, doing so may result in fire or electrical shock.

• Ensure that the safety ground terminal is connected to a proper ground. Never connect the ground to a gas pipe

as a catastrophic disaster may result.

• Be sure the installation of the product is stable, avoid slanted surfaces as the product may fall and cause injury or property damage.

CAUTION – When the Device is in Use

• Ne ver place heavy objects on the product, causing it to fall and/or break, resulting in personal injury and

property damage. In addition, the product itself may fall and cause injury and property damage.

• Contact Atlas Sound for instructions on cleaning the inside of the unit. Large accumulations of dust inside

the unit may result in heat buildup and fire.

• Ensure that the power supply plug is securely plugged into the wall outlet. Never allow dust to accumulate

on the power plug or inside the wall outlet.

• When cleaning the unit or the unit is not to be operated for an extended time period, unplug power cord

from the wall.

Specyfikacje produktu

Marka:	Atlas Sound
Kategoria:	system hi-fi
Model:	DSP2212

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Atlas Sound DSP2212, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje system hi-fi Atlas Sound

Atlas Sound TSD-ALC2 Instrukcja

22 Września 2024

Atlas Sound DSP2210 Instrukcja

22 Września 2024

Atlas Sound TSD-DA13 Instrukcja

21 Września 2024

Atlas Sound DSP2212 Instrukcja

18 Września 2024

Atlas Sound ASP-MG24TDB Instrukcja

18 Września 2024

Atlas Sound BlueBridge BB-SM1 Instrukcja

17 Września 2024

Atlas Sound TSD-GPN1200 Instrukcja

17 Września 2024

Atlas Sound BlueBridge Designer II Instrukcja

17 Września 2024

Instrukcje system hi-fi

Najnowsze instrukcje dla system hi-fi

AKAI EIE Pro Instrukcja

13 Października 2024

Sharp XL-540H Instrukcja

11 Października 2024

Kenwood M-9000S Instrukcja

10 Października 2024

GoGen MSC 472 BTDAB Instrukcja

9 Października 2024

Morel SUB-10X Instrukcja

9 Października 2024

Morel USUB 803 Instrukcja

9 Października 2024

Morel Soundsub PSW8e-w Instrukcja

9 Października 2024

Morel Sopran 934 Instrukcja

9 Października 2024

NAD M10 V3 Instrukcja

9 Października 2024

NUVO NV-MPS4-E Instrukcja

8 Października 2024