Instrukcja obsługi ATen UE250

ATen Kable do komputerów PC i urządzeń peryferyjnych UE250

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla ATen UE250 (2 stron) w kategorii Kable do komputerów PC i urządzeń peryferyjnych. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/2

Installation

Installation is simply a matter of plugging in the cables:

1. Plug the UE-250 USB cable into the computer’s USB

port or a USB hub.

2. Plug the USB peripheral into the UE-250 socket.

That’s all there is to it.

Troubleshooting

Problem Cause Solution

Device

operates

erratically

Static electricity or

insufficient power

may cause the

device to operate

erratically.

Reset the device by

unplugging the cable and

then plugging it back in or

use external power to your

linked devices.

specifications

Function Specification

Power Supply Bus Powered

Cable length (output) 5 m (16ft.)

Connectors 1 Type A Male

1 Type A Female

USB Specification 2.0 spec. for high, full and low

Driver Support Native Driver Support

Operating Temperature 5° - 40° C

Storage Temperature -20° - 60° C

Humidity 0% - 80% RH, NC

Weight 255g

Limited Warranty

IN NO EVENT SHALL THE DIRECT VENDOR’S LIABILITY EXCEED

THE PRICE PAID FOR THE PRODUCT FROM DIRECT, INDIRECT,

SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES RESULTING

FROM THE USE OF THE PRODUCT, DISK, OR ITS DOCUMENTATION.

The direct vendor makes no warranty or representation, expressed,

implied, or statutory with respect to the contents or use of this

documentation, and especially disclaims its quality, performance,

merchantability, or fitness for any particular purpose.

The direct vendor also reserves the right to revise or update the device or

documentation without obligation to notify any individual or entity of such

revisions, or update. For further inquiries, please contact your direct

vendor.

- 5 -- 4 -

User Manual

UE-250

Read this manual thoroughly and follow the installation and

operation procedures carefully to prevent any damage to the

unit, and/or any of the devices connected to it.

This package contains:

M1 UE-250 USB 2.0 Repeater Cable

M1 User Manual

If anything is damaged or missing, contact your dealer.

Manual Part No. PAPE-1240-100

Printed in Taiwan 10/2003

All brand names and trademarks are the registered property of their respective owners

Overview

The UE-250 USB Repeater Cable allows you to extend

the distance between your computer and your USB

peripherals by 5 meters (16’). Unlike typical cables, the

UE-250 is an active extension cable. All USB signals

transmitted through it are regenerated to maintain optimal

signal integrity to meet the USB 2.0 specification.

Features

MExtends the distance to USB devices by 5 m (16’)

MEmbedded custom ASIC regenerates transmitted USB

signals to maintain optimal signal integrity

System Requirements

MWhistler; Windows: XP, 2000, Me, 98 SE; Mac OS 8.6

or higher

Note: Only systems with a USB 2.0 driver installed

can support data transfer speeds of up to 480

Mbps; all others only support speeds of up to

12 Mbps.

MUSB 2.0 Host Controller installed on the system.

Note: The UE-250 can be connected to a USB 1.1

Host Controller, but in that case, it only

supports USB 1.1 speeds (1.5 - 12 Mbps).

Components

1. Built in cable with USB connection to USB port on PC

or hub

2. LED (green) indicates USB link

3. Type female USB port for connection from peripheralA

4. LED (red) indicates overcurrent

- 2 -- 1 - - 3 -

NOTE: This equipment has been tested and found to

comply with the limits for a Class B digital device

pursuant to Subpart J of Part 15 of FCC Rules. These

limits are designed to provide reasonable protection

against harmful interference in a residential

installation. This equipment generates, uses and can

radiate radio frequency energy and, if not installed and

used in accordance with the instructions, may cause

harmful interference to radio communications.

However, there is no guarantee that interference will

not occur in a particular installation. If this equipment

does cause harmful interference to radio or television

reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to

correct the interference by one or more of the

following measures:

MReorient or relocate the receiving antenna.

MIncrease the separation between the equipment

and receiver.

MConnect the equipment into an outlet on a circuit

different from that which the receiver is connected.

MConsult the dealer or an experienced

radio/television technician for help.

Specyfikacje produktu

Marka:	ATen
Kategoria:	Kable do komputerów PC i urządzeń peryferyjnych
Model:	UE250

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z ATen UE250, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje Kable do komputerów PC i urządzeń peryferyjnych ATen

ATen CV190 Instrukcja

22 Września 2024

ATen SXP325A Instrukcja

22 Września 2024

ATen CS62KM Instrukcja

22 Września 2024

ATen CV211CP Instrukcja

21 Września 2024

ATen ACS-62 Instrukcja

20 Września 2024

ATen CV211 Instrukcja

18 Września 2024

ATen UC485 Instrukcja

18 Września 2024

ATen CV100KM Instrukcja

18 Września 2024

ATen UE250 Instrukcja

18 Września 2024

ATen UC1284B Instrukcja

17 Września 2024

Instrukcje Kable do komputerów PC i urządzeń peryferyjnych

Najnowsze instrukcje dla Kable do komputerów PC i urządzeń peryferyjnych

Goobay 68874 Instrukcja

9 Października 2024

Goobay 61259 Instrukcja

9 Października 2024

Kogan KAHBCSPLT4A Instrukcja

9 Października 2024

Laserliner PersonalCable Instrukcja

9 Października 2024

StarTech.com USBAUB1MBK Instrukcja

9 Października 2024

StarTech.com USBAUB3MBK Instrukcja

9 Października 2024

StarTech.com USBAUB2MBK Instrukcja

9 Października 2024

StarTech.com CRJ4550PK Instrukcja

9 Października 2024

StarTech.com CRJ45C6STR50 Instrukcja

9 Października 2024

StarTech.com ST8CU824 Instrukcja

9 Października 2024