Instrukcja obsługi ATen KA7240S

ATen przełącznik KA7240S

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla ATen KA7240S (2 stron) w kategorii przełącznik. Ta instrukcja była pomocna dla 7 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/2
Package Contents
1
Hardware Review (Front View)
2-1
2-2 Hardware Review (Front View)
Specifications
6
Hardware Review (Rear View)
3
Hardware Installation
5
1. Remove stacking brackets.
2. Remove the two screws from the side front and the two screws
from the bottom front of the unit.
3. Use the screws provided with the rack mount kit to attach the
mounting brackets to the sides of the unit.
4. Attach unit to rack.
Before you begin, make sure that power to all the devices you will be connecting up has been turned
off. You must unplug the power cords of any computer that has a Keyboard Power On function.
To set up your Console Module, refer to the installation diagram (the numbers in the diagram
correspond to the steps below), and do the following:
Note: For KA7230/KA7230S modules, disregard references to microphone and speaker installation.
1. Ground the unit by connecting one end of the grounding wire to the grounding terminal, and the
other end of the wire to a suitable grounded object
2. Plug your Console devices (USB or PS/2 keyboard, USB or PS/2 mouse, monitor, microphone
and speakers into the switch's Console Ports. Each Port is labeled and marked with an icon to
indicate itself.
3. Use Cat 5e/6 cable to connect the upper KVM Switch Port (port 1) on the
KA7230/KA7230S/KA7240/KA7240S' rear panel to any available Console Port on the KVM
switch's rear panel.
4. (Optional) For a redundant connection to the switch, use Cat 5e/6 cable to connect the lower
KVM Switch Port (port 2) on the KA7230/KA7230S/KA7240/KA7240S' rear panel to any
available Console Port on the KVM switch's rear panel.
5. Use the KVM Cable provided with this package to connect the Local Computer KVM Port to the
local computer.
6. Plug in the power adapter.
Requirements
4
Console
• A monitor capable of the highest resolution that you will be using on any computer in the installation.
• A PS/2 or USB keyboard
• A PS/2 or USB mouse
Cables
• Cat 5e/6 to connect the KA7230/KA7230S/KA7240/KA7240S to the KVM switch
• For optimal signal integrity and to simplify the layout, a high quality KVM Console Module to Local
Computer cable (with custom SPHD-15 connector) is included with this product. No additional cable
purchase is necessary.
• RS-232 Cable (DB9F to DB9F) to connect the KA7230/KA7230S/KA7240/KA7240S’ RS-232 port to
the local PC.
1. Power LED [Indicates the module is turned on and receiving power]
2. Online LED [Indicates connection to a KVM switch]
3. Local LED [Indicates Local Computer has the KVM focus]
4. Remote LED [Indicates KVM Switch has the KVM focus]
5. Video Gain + Switch [Press to increase the video gain]
6. Video Gain - Switch [Press to decrease the video gain]
7. Local / Remote Switch [Press to toggle the Local Computer/KVM Switch focus]
Note: Local Computer / KVM Switch focus may also be toggled using a keyboard hotkey
combination as follows:
1. Press and hold [Num Lock]
2. Press and release the minus (-) key twice
1. Power LED [Indicates the module is turned on and receiving power]
2. Online LED [Indicates connection to a KVM switch]
3. Local LED [Indicates Local Computer has the KVM focus]
4. Remote LED [Indicates KVM Switch has the KVM focus]
5. Video Gain + Switch [Press to increase the video gain]
6. Video Gain - Switch [Press to decrease the video gain]
7. Local / Remote Switch [Press to toggle the Local Computer/KVM Switch focus]
8. USB Port [Virtual Media device plugs in here]
1. Grounding Terminal
2. KVM Switch Connection Ports
3. RS-232 Port
4. Console PS/2 Mouse and Keyboard Ports
5. Power Jack
6. Local Computer KVM Port
7. Console Monitor Port
8. Console USB Mouse and Keyboard Ports
9. Firmware Recovery Switch
1. Grounding Terminal
2. Local Computer Microphone and Speaker Ports
3. KVM Switch Connection Ports
4. RS-232 Port
5. Console PS/2 Mouse and Keyboard Ports
6. Power Jack
7. Local Computer KVM Port
8. Console Monitor Port
9. Console USB Mouse and Keyboard Ports
10. Firmware Recovery Switch
11. Console Microphone and Speaker Ports
KA7230/KA7230S
KA7230/KA7230S
KA7240/KA7240S
KA7240/KA7240S
Function KA7230/KA7230S KA7240/KA7240S
Computer Connections 1
Console Connections 1
Port Selection GUI, Hotkey
Connectors
Console
Ports
Keyboard 1 x USB Type A Female (White), 1 x 6-pin Mini-DIN Female (Purple)
Video 1 x HDB-15 Female (Blue)
Mouse 1 x USB Type A Female (White) , 1 x 6-pin Mini-DIN Female (Green)
Local Computer KVM Port 1 x SPHD-17 Female (Yellow)
USB virtual media 2.0 port 1 x USB Type Female (White) A
KVM Switch Ports 2 x RJ-45 Female
RS-232 1 x DB9 Male (Black)
F/W Upgrade 1 x Slide
Audio
N/A
N/A 2 x Mini stereo jack Female (Green)
2 x Mini stereo jack Female (Pink)
Power 1 x DC Jack
Switches Local/Remote 1 x Pushbutton
Video Gain Adjustment 2 x Pushbutton
LEDs
Power 1 (Blue)
Online 1 (Green)
Local 1 (Orange)
Remote 1 (Orange)
Emulation Keyboard/Mouse PS/2; USB (PC, Sun, Mac)
Video 1280 x 1024 @ 60 Hz
Scan Interval 1-240 sec.
Power Consumption DC 5.3V, 6.5 W DC 5.3V, 10.12 W
Environment
Operating Temp. 0˚ to 50˚ C
Storage Temp. -20˚ to 60˚ C
Humidity 0 - 80% RH, Non-condensing
Physical
Properties
Housing Metal
Weight 1.22 kg 1.26 kg
Dimensions (L x W x H) 22.71 x 17.15 x 5.48 cm (including stacking bracket)
ONL I NE
POW E R LOC A L RE MOTE
1 2 3
765
4
ONL I NE
POW E R LOC A L RE MOTE
1 2 3
765 8
4
5
5 6 9
8
7
2
1
3 4
6 87 10 11
32 4 5
9
1
2
2
4
6
1
5
3
KA7230 PS/2-USB Console Module (300m max.)
KA7240 Virtual Media PS/2-USB Console Module (300m max.)
KA7230S PS/2-USB Console Module (200m max.)
KA7240S Virtual Media PS/2-USB Console Module (200m max.)
© Copyright 2017 ATEN
® International Co., Ltd. www.aten.com
Altusen and the Altusen logo are trademarks of ATEN International Co., Ltd.
All rights reserved. All other trademarks are the property of their respective owners.
This product is RoHS compliant PAPE-1215-301G Printing Date: 05/2017
This User Guide briefly describes how to install and operate the KA7230/KA7230S/KA7240/KA7240S
Console Module with the Matrix KVM Switch
The complete KA7230/KA7230S/KA7240/KA7240S package consists of:
1 KA7230 or KA7230S or KA7240 or KA7240S Console Module with stacking brackets
1 KVM Cable
1 Power Adapter
1 RS-232 Cable (DB9F to DB9F) (KA7230/KA7240)
1 Mounting Kit
1 User Instructions
If anything is missing or damaged, please contact your dealer immediately.
3. Release [Num Lock]
ATEN Altusen™
All information, documentation, firmware, software utilities, and specifications contained in this package are subject to change without prior
notification by the manufacturer. Please visit our website http://www.aten.com/download/?cid=dds for the most up-to-date versions.
Online Registration
• http://eservice.aten.com
Technical Phone Support
International:
• 886-2-8692-6959
China:
• 86-10-5255-0110
Japan:
• 81-3-5615-5811
Korea:
• 82-2-467-6789
North America:
• 1-888-999-ATEN Ext: 4988
United Kingdom:
• 44-8-4481-58923
FCC Caution: Any changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate this equipment.
Warning: Operation of this equipment in a residential environment could cause radio
interference.
Warning: This equipment is compliant with Class A of CISPR 32. In a residential
environment this equipment may cause radio interference.
Suggestion: Shielded twisted pair (STP) cables must be used with the unit to ensure
compliance with FCC & CE standards.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:(1) this device mat not cause harmful interference, and(2) this device must
accept any interference received, including interference that may cause undesired operation.
이 기기는 업무용(A급) 전자파적합기기로서 판매자 또는 사용자는 이 점을
주의하시기 바라며, 가정외의 지역에서 사용하는 것을 목적으로 합니다.
Support and Documentation Notice
All information, documentation, firmware, software utilities, and specifications contained
in this package are subject to change without prior notification bythe manufacturer.
To reduce the environmental impact of our products, ATEN documentation and software
can be found online at http://www.aten.com/download/
Technical Support
www.aten.com/support
EMC Information
FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT:
This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction manual,
may cause harmful interference to radio communications. Operation of this equipment in
a residential area is likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.

Specyfikacje produktu

Marka: ATen
Kategoria: przełącznik
Model: KA7240S

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z ATen KA7240S, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje przełącznik ATen

ATen

ATen CE610A Instrukcja

23 Września 2024
ATen

ATen VM3250 Instrukcja

23 Września 2024
ATen

ATen KL1508AIN Instrukcja

22 Września 2024
ATen

ATen VM0808HB Instrukcja

22 Września 2024
ATen

ATen KE6940R Instrukcja

22 Września 2024
ATen

ATen CN8600 Instrukcja

22 Września 2024
ATen

ATen CS1644A Instrukcja

22 Września 2024
ATen

ATen KE8950-AX-E Instrukcja

22 Września 2024
ATen

ATen CS1922M Instrukcja

22 Września 2024
ATen

ATen Altusen KA8270 Instrukcja

22 Września 2024

Instrukcje przełącznik

Najnowsze instrukcje dla przełącznik

Netgear

Netgear GS110TPP Instrukcja

15 Października 2024
ZyXEL

ZyXEL SFP-LHX1310-40-D Instrukcja

14 Października 2024
Tripp Lite

Tripp Lite B005-DPUA4 Instrukcja

11 Października 2024
Lancom

Lancom CS-8132F Instrukcja

9 Października 2024
Lancom

Lancom YS-7154CF Instrukcja

9 Października 2024
TP-Link

TP-Link Festa FS328G Instrukcja

9 Października 2024
Totolink

Totolink SW24DM Instrukcja

9 Października 2024
Totolink

Totolink SW1008P Instrukcja

9 Października 2024
Totolink

Totolink SW24G2 Instrukcja

9 Października 2024
Cudy

Cudy FS1006P Instrukcja

9 Października 2024