Instrukcja obsługi ATen CN8600

ATen Schakelaar CN8600

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla ATen CN8600 (165 stron) w kategorii Schakelaar. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/165
CN8600
1-Local / Remote Share Access
Single Port KVM over IP Switch
User Manual
CN8600 User Manual
ii
EMC Information
FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE
STATEMENT
This equipment has been tested and found to comply with the limits for a Class
A digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in which case the user
will be required to correct the interference at his own expense.
The device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation.
FCC Caution
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate this equipment.
Warning
Operation of this equipment in a residential environment could cause radio
interference.
Achtung
Der Gebrauch dieses Geräts in Wohnumgebung kann Funkstörungen
verursachen.
KCC Statement:
Industry Canada Statement
This Class A digital apparatus complies with Canadian ICES-003.
CN8600 User Manual
iii
RoHS
This product is RoHS compliant.
About this Manual
This manual is provided to help you get the most out of your CN8600. It covers
all aspects of the device, including installation, configuration, and operation.
The model covered in this user manual is:
An overview of the information found in the manual is provided below.
Chapter 1, Introduction, introduces you to the CN8600, its purpose,
features and benefits, with its front and back panel components described.
Chapter 2, Hardware Setup, describes and illustrates how to set up your
CN8600.
Chapter 3, Browser Login, describes how to log into the CN8600 with a
browser, and the various functions contained.
Chapter 4, Configuration, explains the administrative procedures that are
employed to configure the CN8600’s working environment.
Chapter 5, The Client Viewer, explains how to access the CN8600
remotely using the Windows Client Viewer, along with the various functions
available.
Chapter 6, AP Operation, describes how to operate the CN8600 using
Windows and Java Client application programs, rather than with the browser
method.
Chapter 7, The JavaClient Viewer, describes how to access the CN8600
remotely using Java Client Viewer, along with the various functions available.
Chapter 8, Local Console, describes the CN8600’s local console, its
functionalities and LUC port access.
Chapter 9, The Log File, shows how to use the log file utility to view the
events that take place on the CN8600.
Chapter 10, The Log Server, explains how to install and configure the Log
Server.
Model Product Name
CN8600 1-Local/Remote Share Access Single Port DVI KVM over IP Switch

Specyfikacje produktu

Marka: ATen
Kategoria: Schakelaar
Model: CN8600

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z ATen CN8600, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Schakelaar ATen

ATen

ATen KL1508AIN Instrukcja

22 Września 2024
ATen

ATen VM0808HB Instrukcja

22 Września 2024
ATen

ATen KE6940R Instrukcja

22 Września 2024
ATen

ATen CN8600 Instrukcja

22 Września 2024
ATen

ATen CS1644A Instrukcja

22 Września 2024
ATen

ATen UCE32100 Instrukcja

21 Września 2024
ATen

ATen CE920 Instrukcja

21 Września 2024
ATen

ATen AT-CS1758 Instrukcja

21 Września 2024
ATen

ATen CS19216 Instrukcja

20 Września 2024
ATen

ATen CE610-AT-E Instrukcja

19 Września 2024

Instrukcje Schakelaar

Najnowsze instrukcje dla Schakelaar

SEADA

SEADA SWM36 Instrukcja

3 Października 2024
SEADA

SEADA SWM16 Instrukcja

3 Października 2024
SEADA

SEADA HBT100UB Instrukcja

3 Października 2024
SEADA

SEADA SWM08 Instrukcja

3 Października 2024
SEADA

SEADA MS-HBT88B70 KIT Instrukcja

3 Października 2024
SEADA

SEADA SWM80 Instrukcja

3 Października 2024
Equip

Equip 650329 Instrukcja

2 Października 2024
GEV

GEV 000773 Instrukcja

2 Października 2024
GEV

GEV LCT 865 Instrukcja

2 Października 2024