Instrukcja obsługi Asus EBG15

Asus Karta sieciowa/adapter EBG15

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Asus EBG15 (4 stron) w kategorii Karta sieciowa/adapter. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/4
Gigabit VPN Wired Router
Router con cable Gigabit VPN
Gigabit VPN 路由器
EBG15
1
Power LED
2
USB 3.2 Gen 1 LED
3
Reset button
4
USB 3.2 Gen 1 port
5
WAN (Internet) port
6
WAN/LAN ports
7
LAN ports
8
Power (DCIN) port
* For detailed
information, please
refer to
https://asus.click/
ExpertWiFiEBG15
Descripción general del enrutador
路由器概覽
6 7 8
1
電源指示燈
2
USB 3.2 Gen 1 指示燈
3
重置按鈕
4
USB 3.2 Gen 1 連接埠
5
WAN（網際網路）連接埠
6
WAN/LAN 連接埠
7
LAN 連接埠
8
電源（DCIN）連接孔
DC Power adapter
直流電源變壓器
DC Output: +12V with max 1.5A
DC 輸出： +12V 電壓
最大電流 1.5A
Operating Temperature
運作溫度 0~40oCStorage
儲存溫度 0~70oC
Operating Humidity
運作濕度 50~90% Storage
儲存濕度 20~90%
規格 / Specifications：
LED Indicators / LED 指示燈
Speed LED (Green)
速度指示燈（綠色）
Link/Act LED (Amber)
Link/Act 指示燈（琥珀色）
1G ON
燈亮 1G/100M/10M Blinking
閃爍
100M/10M OFF
燈滅
No Traffic
無資料傳輸
ON
燈亮
WARNING! Any changes or modications not expressly approved by the party responsible for compliance could
void the user’s authority to operate the equipment.
Prohibition of Co-location
This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter.
IMPORTANT NOTE:
Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. End users must follow the specic operating instructions for satisfying RF exposure compliance. To maintain
compliance with FCC exposure compliance requirement, please follow operation instruction as documented in this manual.
WARNING! This equipment must be installed and operated in accordance with provided instructions and the
antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all
persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
Compliance Statement of Innovation, Science and Economic Development Canada (ISED)
This device complies with Innovation, Science and Economic Development Canada licence exempt RSS standard(s). Operation
is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any
interference, including interference that may cause undesired operation of the device.
CAN ICES-003(B)/NMB-003(B)
Déclaration de conformité de Innovation, Sciences et Développement économique Canada (ISED)
Le présent appareil est conforme aux CNR d’Innovation, Sciences et Développement économique Canada applicables aux
appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : (1) l’appareil ne doit pas
produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage
est susceptible d’en compromettre le fonctionnement.
CAN ICES-003(B)/NMB-003(B)
NCC警語
「取得審驗證明之低功率射頻器材，非經核准，公司、商號或使用者均不得擅自變更頻率、加大功率或變更原設計之特
性及功能。低功率射頻器材之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時，應立即停用，並改善至無
干擾時方得繼續使用。前述合法通信，指依電信管理法規定作業之無線電通信。低功率射頻器材須忍受合法通信或工
業、科學及醫療用電波輻射性電機設備之干擾。」
安全說明：
- 請在溫度為 0°C (32°F) 至 40°C (104°F) 之間的環境中使用本產品。
- 請依照產品上的電源功率貼紙說明使用正確的電源變壓器，如果使用錯誤規格的電源變壓器有可能會造成內部零件的
損毀。
- 請勿將產品放置於不平坦或不穩定的表面，若產品的機殼毀損，請聯絡維修服務人員。
- 請勿在產品上放置其他物品，請勿將任何物品塞入產品內，以避免引起元件短路或電路損毀。
- 請保持機器在乾燥的環境下使用，雨水、溼氣、液體等含有礦物質將會腐蝕電子線路，請勿在雷電天氣下使用數據
機。
- 請勿堵塞產品的通風孔，以避免因散熱不良而導致系統過熱。
- 請勿使用破損的電源線、附件或其他周邊產品。
- 如果電源已毀損，請不要嘗試自行修復，請將其交給專業技術服務人員或經銷商來處理。
- 為了防止電擊風險，在搬動主機之前，請先將電源線插頭暫時從電源插座上拔除。
單元 限用物質及其化學符號
鉛 (Pb) 汞 (Hg) 鎘 (Cd) 六價鉻 (Cr
+6) 多溴聯苯 （PBB) 多溴二苯醚（PBDE)
印刷電路板及電子組件
-
○ ○ ○ ○ ○
結構組件（金屬/塑膠） ○ ○ ○ ○ ○ ○
其他組件（如：天線/指示燈、
連接線）
-
○ ○ ○ ○ ○
其他及其配件（如：電源
供應器）
-
○ ○ ○ ○ ○
備考1.“○”係指該項限用物質之百分比含量未超出百分比含量基準值。
備考2.“-”係指該項限用物質為排除項目。
「產品之限用物質含有情況」之相關資訊，請參考下表：
報驗義務人：華碩電腦股份有限公司
地址：台北市北投區立德路15號1樓
Reboot modem and ensure its connection is ready
Reiniciar el módem y asegurarse de que su conexión está lista
請重新啟動數據機，並確保其已準備就緒，可以進行網路連線
Notice: Unplug modem for 10 sec then plug back in
Aviso: Desenchufe el módem durante 10 segundos y vuelva a enchufarlo
注意：請拔下數據機的電源插頭 10 秒，然後再插回
Prepare your ASUS router and power it on
Prepara tu enrutador ASUS y enciéndelo
準備好您的華碩路由器並開機
Once the power LED lights up, it’s ready for setup
Una vez que la luz de estado es azul jo, está listo para la instalación
當電源指示燈亮起時，可以準備開始安裝
Support Wall Mount
IMPORTANT! DO NOT mount this equipment higher than 2 meters.
NOTE: It is recommended to use screws with a size of PA5.7*2mm.
¡IMPORTANTE! NO coloque este equipo a una altura mayor que los 2 metros.
NOTA: Se recomienda utilizar tornillos de tamaño PA5.7*2mm.
重要！ 本產品適用於安裝高度 ≤2m。
注意： 建議使用尺寸為 PA5.7*2mm 的螺絲。
[App] Scan the code and download ASUS ExpertWiFi app for setup
[App] Escanea el código y descarga la aplicación ASUS ExpertWiFi para
la instalación
[App] 掃描此 code 並下載 ASUS ExpertWiFi App 以進行網路設定
https://asus.click/asusexpertwifii https://asus.click/asusexpertwifia
ASUS ExpertWiFi
[Web] Open a web browser and navigate to http://expertwi.net for
web setup
[Web] Abra un navegador web y navegue a http://expertwi.net para la
instalación de la web.
[網頁] 開啟網頁瀏覽器並至 http://expertwifi.net 進行網頁設
定。
EBG15/EBP15
EBG15/EBP15
EBG19P
EBG19P
ASUS Recycling/Takeback Services
ASUS recycling and takeback programs come from our commitment to the highest standards for protecting our environment.
We believe in providing solutions for you to be able to responsibly recycle our products, batteries, other components, as well as
the packaging materials. Please go to http://csr.asus.com/english/Takeback.htm for the detailed recycling information in dierent
regions.
REACH
Complying with the REACH (Registration, Evaluation, Authorisation, and Restriction of Chemicals) regulatory framework, we
published the chemical substances in our products at ASUS REACH website at http://csr.asus.com/english/REACH.htm
Federal Communications Commission Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
• This device may not cause harmful interference.
• This device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
FCC RF Caution Statement
WARNING: Any changes or modications not expressly approved by the party responsible for compliance could void your
authority to operate the equipment.
FCC RF Exposure information:
This device meets the government’s requirements for exposure to radio waves. This device is designed and manufactured not to
exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the
U.S. Government. The exposure standard employs a unit of measurement known as the Specic Absorption Rate, or SAR. The SAR
limit set by the FCC is 1.6 W/kg. Tests for SAR are conducted using standard operating positions accepted by the FCC with the EUT
transmitting at the specied power level in dierent channels. The FCC has granted an Equipment Authorization for this device
with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this device is on
le with the FCC and can be found under the Display Grant section of www.fcc.gov/oet/ea/fccid.

Specyfikacje produktu

Marka: Asus
Kategoria: Karta sieciowa/adapter
Model: EBG15

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Asus EBG15, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Karta sieciowa/adapter Asus

Asus

Asus EBG15 Instrukcja

18 Grudnia 2024
Asus

Asus USB-C2500 Instrukcja

29 Września 2024
Asus

Asus PCE-AC68 Instrukcja

29 Września 2024
Asus

Asus PCE-AC51 Instrukcja

23 Września 2024
Asus

Asus USB-N13 Instrukcja

15 Września 2024
Asus

Asus USB-AC53 Nano Instrukcja

5 Września 2024
Asus

Asus USB-N14 Instrukcja

3 Września 2024
Asus

Asus PCE-AC88 Instrukcja

1 Września 2024
Asus

Asus PEB-10G/57840-2S Instrukcja

1 Września 2024
Asus

Asus NX1101 Instrukcja

1 Września 2024

Instrukcje Karta sieciowa/adapter

Najnowsze instrukcje dla Karta sieciowa/adapter

StarTech.com

StarTech.com O1210I-NETWORK-CARD Instrukcja

28 Grudnia 2024
Micro Connect

Micro Connect MC-POEADAPTER-USB-C Instrukcja

27 Grudnia 2024
Lindy

Lindy 43237 Instrukcja

27 Grudnia 2024
Lindy

Lindy 43247 Instrukcja

27 Grudnia 2024
Akasa

Akasa AK-PCCE25-01 Instrukcja

26 Grudnia 2024
OpenVox

OpenVox AE2410E40 Instrukcja

26 Grudnia 2024
SMK-Link

SMK-Link VP6494 Instrukcja

17 Grudnia 2024
SMK-Link

SMK-Link VP6493 Instrukcja

17 Grudnia 2024
Aukey

Aukey PA-U32 Instrukcja

14 Grudnia 2024
Vigitron

Vigitron Vi3305 Instrukcja

10 Grudnia 2024