Instrukcja obsługi Ashdown Engineering RM-C210T-500 EVO II
Ashdown Engineering
wzmacniacz gitarowy
RM-C210T-500 EVO II
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Ashdown Engineering RM-C210T-500 EVO II (6 stron) w kategorii wzmacniacz gitarowy. Ta instrukcja była pomocna dla 10 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/6


Thank you for purchasing your Ashdown Engineering Amplier and welcome to the family!
We really think you’ve made the right choice and know that this amplier will give you years
of great tone and service. It is a machine though and needs to be looked after, please read
through this user manual which will help you get the most out of your new Amp and keep it
running as long as some of our happiest and very famous customers.
Please register this product online so we can make sure we give you years of customer
support through our friendly in-house service centre.
Here is where you need to visit to register your product:
http://www.ashdownmusic.com/register
THANK YOU
REGISTER ONLINE

Ashdown Ampliers reserve the right to change specications without notice. E & O E. All contents © Ashdown 2016.
Inputs
There are two choices of instrument input, these are marked passive and active. The
passive input is high sensitivity and high impedance to suit passive bass instruments.
The active input is much lower sensitivity and impedance to accurately match the signal
from active bass instruments i.e. Those with a built in battery powered pre-amp.
Input control
The input control sets the signal level through the preamp in conjunction with the input
level vu meter. This is adjusted to give a reading of 0vu on the meter for average play-
ing dynamics with occasional peaks into the red region. Please note that the setting of
this may have to be re-adjusted after modication of the E.Q. controls.
Shape
With this button in a xed E.Q. is superimposed on the pre-amp to give a bass & high
boost to the sound. This gives +8db at 50hz and gives +10db at 10khz.
E.Q.
This button switches the equalisation section in or out i.e. the Bass, Middle and Treble
controls and the two rotary controls placed between these.
Equalisation
This consists of bass, middle and treble controls with two more rotary controls placed
in-between. This can be used in a number of ways:
Firstly as a very simple bass, middle and treble tone control section as found on older
traditional ampliers. This is done by leaving the 340hz and 1.6Khz controls set in their
centre positions and using only the bass, middle and treble controls to alter the overall
tone.
Secondly, if more control is required then the 340hz and 1.6Khz controls can also be
used to tailor the E.Q. In the regions between the main tone controls.
This provides a very versatile equalisation section, it is simple to understand and op-
erate, yet provides a wide degree of variation. It retains the simplicity of a three control
tone section but provides the exibility of a graphic equaliser.
Specyfikacje produktu
Marka: | Ashdown Engineering |
Kategoria: | wzmacniacz gitarowy |
Model: | RM-C210T-500 EVO II |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Ashdown Engineering RM-C210T-500 EVO II, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje wzmacniacz gitarowy Ashdown Engineering

21 Września 2024

17 Września 2024

16 Września 2024

14 Września 2024

12 Września 2024

10 Września 2024

9 Września 2024

8 Września 2024
Instrukcje wzmacniacz gitarowy
- wzmacniacz gitarowy Yamaha
- wzmacniacz gitarowy Roland
- wzmacniacz gitarowy Behringer
- wzmacniacz gitarowy Boss
- wzmacniacz gitarowy Line 6
- wzmacniacz gitarowy Empress Effects
- wzmacniacz gitarowy Marshall
- wzmacniacz gitarowy Blackstar
- wzmacniacz gitarowy TC Electronic
- wzmacniacz gitarowy Peavey
- wzmacniacz gitarowy ART
- wzmacniacz gitarowy Hartke
- wzmacniacz gitarowy Palmer
- wzmacniacz gitarowy VOX
- wzmacniacz gitarowy Harley Benton
- wzmacniacz gitarowy Fender
- wzmacniacz gitarowy Mooer
- wzmacniacz gitarowy Electro Harmonix
- wzmacniacz gitarowy Fishman
- wzmacniacz gitarowy Radial Engineering
- wzmacniacz gitarowy API Audio
- wzmacniacz gitarowy SPL
- wzmacniacz gitarowy Budda
- wzmacniacz gitarowy Ampeg
- wzmacniacz gitarowy Valeton
- wzmacniacz gitarowy Hughes & Kettner
- wzmacniacz gitarowy Laney
- wzmacniacz gitarowy Dimavery
- wzmacniacz gitarowy Markbass
- wzmacniacz gitarowy NUX
- wzmacniacz gitarowy Orange
- wzmacniacz gitarowy AER
- wzmacniacz gitarowy EBS
- wzmacniacz gitarowy Rivera
- wzmacniacz gitarowy Suhr
- wzmacniacz gitarowy Two Notes
- wzmacniacz gitarowy GR Bass
- wzmacniacz gitarowy Voodoo Lab
- wzmacniacz gitarowy Bugera
- wzmacniacz gitarowy AMT
- wzmacniacz gitarowy DV Mark
- wzmacniacz gitarowy DACS Audio
Najnowsze instrukcje dla wzmacniacz gitarowy

11 Stycznia 2025

9 Stycznia 2025

9 Stycznia 2025

8 Stycznia 2025

30 Grudnia 2025

29 Grudnia 2024

29 Grudnia 2024

29 Grudnia 2024

27 Grudnia 2024

25 Grudnia 2024