Instrukcja obsługi Ashdown Engineering ABM-410H-EVO IV

Ashdown Engineering wzmacniacz gitarowy ABM-410H-EVO IV

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Ashdown Engineering ABM-410H-EVO IV (7 stron) w kategorii wzmacniacz gitarowy. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/7

Park Farm • Inworth • Colchester • Essex • CO5 9SH

http://www.ashdownmusic.com

Operating

Instructions

ABM/RPM-1 Amplifier Heads and ABM Combos

MAG 300 Amplifier Head and Combos

Electric Blue 180 Amplifier Head and Combos

Important Safety Instructions

BASIC PRECAUTIONS

WARNING - When using electrical products, basic precautions should be followed, including the following:

1. Read all the instructions before using the product.

2. Do not use this product near water – for example, near a bathtub, washbowl, kitchen sink, in a wet

basement or near a swimming pool.

3. This product may cause permanent hearing loss. Do not operate for long periods of time at a high

volume level or at any level that is uncomfortable. If you experience any hearing loss or ringing in the

ears, you should consult an audiologist.

4. Make sure nothing interferes with the ventilation of the product when in use.

5. The product should be located away from heat sources such as radiators, heat registers, or other

products that produce heat.

6. The product should be connected to a power supply of the type described in the operating

instructions or as marked on the product.

7. The power supply cord of the product should be unplugged from the outlet when left unused for a

long period of time.

8. Care should be taken so that objects do not fall and liquids are not spilled into the enclosure through

openings.

9. The product should be serviced by qualified personnel when:

a. The power supply cord or the plug has been damaged; or

b. Objects have fallen, or liquid has been spilled into the product: or

c. The product has been exposed to rain or moisture: or

d. The product does not appear to operate normally or exhibits a marked change in performance: or

e. The product has been dropped, or the enclosure damaged.

10. Do not attempt to service the product. All servicing should be referred to qualified service personnel.

11. For continued protection against the risk of fire, replace fuses only with those of the same type and

rating as indicated on the back of the product.

WARNINGS USED ON THE EQUIPMENT

Thank you for purchasing your Ashdown Engineering Amplifier. If you live in the UK, please register

your purchase by completing this form and return it to the following address:

Ashdown Engineering Ltd., Park Farm, Inworth, Colchester, Essex CO5 9SH

(Alternatively you can register online at http://www.ashdownmusic.com)

If you live outside the UK, the local Ashdown distributor may have included a specific registration

form for your country.

Your Ashdown Engineering product details:

Model . . . . . . . . . . . . . . . . . . . . . . . . . Colour . . . . . . . . . . . . . . . . . . . . . . . .

Voltage . . . . . . . . . . . . . . . . . . . . . . . . Tested by . . . . . . . . . . . . . . . . . . . . . .

Serial number . . . . . . . . . . . . . . . . . . . . Date . . . . . . . . . . . . . . . . . . . . . . . . .

2 Year Limited Lifetime Warranty

Your Ashdown Engineering amplifier has been manufactured to the highest standards, using the best-

selected materials.To ensure its optimum performance, please ensure your amplifier is regularly serviced.

This product carries a LIMITED LIFETIME WARRANTY, against defects in materials and workmanship, for

the original purchaser.Ashdown Engineering will, at their discretion, replace or repair any product or part

thereof, which is found by Ashdown Engineering to be defective.This warranty shall not apply to the

damage of covering, fittings or finishes when affected by carelessness, accident or extreme climate changes.

Nor does it apply to normal wear and tear of parts such as valves, fuses, light bulbs, speakers, controls etc.

Please complete the lower section of this warranty and return it within 10 days of purchase to Ashdown

Engineering Ltd. at the above address. In the unlikely event of any defect, please contact an authorised

Ashdown Engineering dealer. All transport charges are to be pre-paid by the Owner. Unless the

registration card is returned normal country warranty laws apply.

Important - Registration Card

Please complete and return this warranty within 10 days of purchase. Include any comments if possible.

Name . . . . . . . . . . . . . . . . . . . . . . . . . Purchased from . . . . . . . . . . . . . . . . . .

Address . . . . . . . . . . . . . . . . . . . . . . . . Date . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Model . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Serial Number . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Age . . . . . . . . . . . . . . . . . . . . . . . . . . .

Comments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

The ABM Design Philosophy

This is a NO COMPROMISE design using the best parts available wherever possible.

Some examples of this are as follows:

• Gold plated jack sockets for reliability and long life.

• Full metal XLR sockets for strength and their positive latching facility.

• Powerful output stages for extra headroom (rated in English RMS real power and not MUSIC or

PEAK power as these can claim to be 2 or 3 times the actual real power of the amplifier).

• Doubling up of the cooling fans for reliability and reduced fan noise (2 fans can run at half the speed

to provide the same cooling capacity and as a consequence generate only half the noise of one fan

running at twice the speed).

• Speed controlled fan drive circuit. Again this reduces the amount of fan noise as the fans run slow

when the unit is cool and increase in speed with output power demands.

• Powerful TOROIDAL mains transformer. This is more expensive than a laminated stack transformer

but has better regulation, i.e., provides more power on demand without sagging out and also has a

minimal external magnetic field which means that single coil pick up basses are less likely to pick up

mains hum from the amplifier.

• FET input circuit to the preamp for ‘Warmth’ even when using the CLEAN input mix setting.

• D.C. heaters for the TUBE section for low noise operation.

• Switch on delay for silent power up.

• Thermal trip for output protection.

• Relay switched speaker output lines for silent power down.

• Sub Bass output and Sub Harmonics facility for really serious bottom end.

Everything possible has been done to make this a reliable, top of the range, minimum service, high quality,

long lasting powerful bass amplifier.

We know you will appreciate the effort that has been put into the design and manufacture of this unit

and you will be rewarded in your choice of bass amplifier by long life and reliability.

The lightning flash with the arrow head symbol within an equilateral triangle is intended to

alert the user to the presence of uninsulated ‘dangerous voltage’ within this product’s

enclosure that may be of sufficient magnitude to constitute a risk of electric shock.

The exclamation point within an equilateral triangle is intended to alert the user to the

presence of important operating and maintenance (servicing) instructions in the literature

accompanying this product.

GROUNDING INSTRUCTIONS

This product must be grounded (earthed). If it should malfunction or breakdown, grounding

provides a path of least resistance for electric current to reduce the risk of electric shock. This

product is equipped with a supply cord having an equipment grounding conductor and a

grounding plug. The plug must be plugged into an appropriate outlet that is properly installed

and grounded in accordance with the local codes and ordinances.

DANGER - Improper connection of the equipment grounding conductor can result in a risk of

electric shock. Check with a qualified electrician or serviceman if you are in doubt as to

whether the product is properly grounded. Do not modify the plug provided with the product

– if it will not fit the outlet, have a proper outlet fitted.

The wires in this mains cord are coloured in accordance with the following code:

Green & Yellow - Earth Blue - Neutral Brown - Live

CE MARK FOR EUROPEAN HARMONISED STANDARDS

The CE mark which is attached to these products means it conforms to EMC Directive

(89/69/EEC), CE mark Directive (93/68/EEC) and Low Voltage Directive (72/23/EEC).

Specyfikacje produktu

Marka:	Ashdown Engineering
Kategoria:	wzmacniacz gitarowy
Model:	ABM-410H-EVO IV

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Ashdown Engineering ABM-410H-EVO IV, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje wzmacniacz gitarowy Ashdown Engineering

Ashdown Engineering ABM-410H-EVO IV Instrukcja

21 Września 2024

Instrukcje wzmacniacz gitarowy

Najnowsze instrukcje dla wzmacniacz gitarowy

Fender Pano Verb Amp Instrukcja

9 Października 2024

Fender Champion II 50 Instrukcja

9 Października 2024

Fender Champion II 100 Instrukcja

9 Października 2024

Fender Champion II 25 Instrukcja

9 Października 2024

Fender Mustang Micro Plus Instrukcja

9 Października 2024

Peavey Classic 20 Instrukcja

8 Października 2024

Roland BluesCube BC-CAB410 Instrukcja

7 Października 2024

SPL 1160 Instrukcja

7 Października 2024

Radial Engineering Headload Prodigy Instrukcja

7 Października 2024

VOX AC15C2 Instrukcja

7 Października 2024