Instrukcja obsługi Artsound PM-2S01

Artsound odbiornik PM-2S01

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Artsound PM-2S01 (12 stron) w kategorii odbiornik. Ta instrukcja była pomocna dla 6 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/12
Please follow the instructions in this manual to obtain the optimum results from this unit.
We also recommend that you keep this manual handy for future reference.
OPERATION MANUAL
PRE AMPLIFIER
PM-2S01
PUBLIC ADDRESS SYSTEM
TABLE OF CONTENTS
1. SAFETY PRECAUTIONS ... ... ............... ... ........... ... ............ ... ............... ... ............ ... .3
2. GENERAL DESCRIPTION . ............... ... ............... ... ........ ... ............... ... ............... ... 5
3. FEATURES ............... ... ............... ... ........ ... ............... ... ............... ... ............ ... .............5
4. NOMENCLATURE AND FUNCTIONS
4.1 Front Panel .......... ............ ... ............... ... ............... ... ............ ... ............... ... ............ ... 6
4.2 Rear Panel....... ... ............... ... ............ ... ............... ... ............... ... ............ ... ............... 7
5. APPLICATIONS ........... ... ............... ... ........... ... ............ ... ............... ... ............... ... ..... 8
6.SPECIFICATIONS . ............ ... ............... ... ............... .............. ... ............ ... ............... . 9
7.BLOCK DIAGRAM ............ ... ............... ... ........... ... ............ ... ............... ... ............ ... . 10
8.DIMENSIONAL DIAGRAM ........... ... ............... .............. ... ............ ... ............... ... .... 11
2
Be sure to read the instructions in this section carefully before use.
Make sure to observe the instructions in this manual as the conventions of safety symbols and messages
regarded as very important precautions are included.
We also recommend you keep this instruction manual handy for future reference.
Safety Symbol and Message Conventions
Safety symbols and messages described below are used in this manual to prevent bodily injury and property
damage which could result from mishandling. Before operating your product, read this manual first and
understand the safety symbols and messages so you are thoroughly aware of the potential safety
Indicates a potentially hazardous situation which, if mishandled, could
result in death or serious personal injury.
Indicates a potentially hazardous situation which, if mishandled, could
result in moderate or minor personal injury, and/or property damage.
When Installing the Unit
Do not expose the unit to rain or an environment
where it may be splashed by water or other liquids,
as doing so may result in fire or electric shock.
Use the unit only with the voltage specified on the
unit. Using a voltage higher than that which is
specified may result in fire or electric shock.
Do not cut, kink, otherwise damage nor modify the
power supply cord. In addition, avoid using the
power cord in close proximity to heaters, and never
place heavy objects -- including the unit itself -- on
the power cord, as doing so may result in fire or
electric shock.
Be sure to replace the unit's terminal cover after
connection completion. Because high voltage is
applied to the speaker terminals, never touch these
terminals to avoid electric shock.
Be sure to ground to the safety ground (earth)
terminal to avoid electric shock. Never ground to a
gas pipe as a catastrophic disaster may result.
Avoid installing or mounting the unit in unstable
locations, such as on a rickety table or a slanted
surface. Doing so may result in the unit falling
down, causing personal injury and/or property
damage.
Do not place cups, bowls, or other containers of
liquid or metallic objects on top of the unit. If they
accidentally spill into the unit, this may cause a fire
or electric shock.
Do not insert nor drop metallic objects or
flammable materials in the ventilation slots of the
unit's cover, as this may result in fire or electric
shock.
1. SAFETY PRECAUTIONS
When the Unit is in Use
Should the following irregularity be found during
use, immediately switch off the power, disconnect
the power supply plug from the AC outlet and
contact your nearest artsound dealer. Make no
further attempt to operate the unit in this condition
as this may cause fire or electric shock.
If you detect smoke or a strange smell coming
from the unit.
If water or any metallic object gets into the unit
If the unit falls, or the unit case breaks
If the power supply cord is damaged (exposure of
the core, disconnection, etc.)
If it is malfunctioning (no tone sounds.)
To prevent a fire or electric shock, never open nor
remove the unit case as there are high voltage
components inside the unit. Refer all servicing to
your nearest artsound dealer.
3

Specyfikacje produktu

Marka: Artsound
Kategoria: odbiornik
Model: PM-2S01

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Artsound PM-2S01, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje odbiornik Artsound

Artsound

Artsound PRL-1504 Instrukcja

7 Października 2024
Artsound

Artsound MX-120M Instrukcja

7 Października 2024
Artsound

Artsound MIKS6.4 Instrukcja

7 Października 2024
Artsound

Artsound PRH-4350 Instrukcja

7 Października 2024
Artsound

Artsound PRH-4240 Instrukcja

7 Października 2024
Artsound

Artsound PM-2S01 Instrukcja

7 Października 2024
Artsound

Artsound MX-60 Instrukcja

7 Października 2024
Artsound

Artsound MX-2406M Instrukcja

7 Października 2024
Artsound

Artsound MAT-8000 Instrukcja

7 Października 2024
Artsound

Artsound MX-5006M Instrukcja

7 Października 2024

Instrukcje odbiornik

Najnowsze instrukcje dla odbiornik

Denon

Denon AVR-S900W Instrukcja

15 Października 2024
Pro-Ject

Pro-Ject Amp Box DS2 Instrukcja

15 Października 2024
AKG

AKG HP12U Instrukcja

15 Października 2024
Apart

Apart SBR160 Instrukcja

14 Października 2024
American Audio

American Audio VLP 600 Instrukcja

14 Października 2024
Chord

Chord Anni Instrukcja

14 Października 2024
Sennheiser

Sennheiser EM 9046 SU Instrukcja

14 Października 2024
Yamaha

Yamaha MusicCast RX-V481 Instrukcja

13 Października 2024
JL Audio

JL Audio VX600/6i Instrukcja

12 Października 2024
Pioneer

Pioneer SX-303RDS Instrukcja

10 Października 2024