Instrukcja obsługi Artsound MX-2406M

Artsound odbiornik MX-2406M

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Artsound MX-2406M (12 stron) w kategorii odbiornik. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/12
Operating Manual
MX-2406M
MX-5006M
SIX ZONE MIXING AMPLIFIER
Please follow the instructions in this manual to obtain the optimum
results from this unit.
We also recommend that you keep this manual handy for future reference
Check our website for any updates of this manual: www.artsound.be
House of Music nv
Ronse, Belgium
www.artsound.be
Tel. +32 9 380 81 80
Fax. +32 9 386 12 35
info@artsound.be
MX-2406M / MX-5006M
2
Table of contents
1. Safety precautions 3
2. General description 4
3. Features 4
4. Nomenclature and functions 5
4.1 front panel 5
4.2 Remote control (built-in music source) 5
4.3 rear panel 6
5. Use 6
6. Applications 8
7. Specications 9
8. FAQ 9
9. Blockdiagram 10
10. Dimensional diagram 11
MX-2406M / MX-5006M
3
1 Safety precautions.
Be sure to read the instructions in this section carefully before use.
Make sure to observe the instructions in this manual as the conventions of safety symbols and messages regarded
as very important precautions are included.
We also recommend you keep this instruction manual handy for future reference.
Warnings and safety.
Safety Symbol and Message Conventions.
Safety symbols and messages described below are used in this manual to prevent bodily injury and property damage,
which could result from mishandling. Before operating your product, read this manual rst and understand the safety
symbols and messages so you are thoroughly aware of the potential safety risk.
Warning.
When Installing the Unit.
Do not expose the unit to rain or an environment
where it may be splashed by water or other liquids, as
doing so may result in re or electric shock.
Use the unit only with the voltage specied on
the unit. Using a voltage higher than that which is
specied may result in re or electric shock.
Do not cut, kink, otherwise damage nor modify the
power supply cord. In addition, avoid using the power
cord in close proximity to heaters, and never place
heavy objects -- including the unit itself -- on the
power cord, as doing so may result in re or electric
shock.
Be sure to replace the unit’s terminal cover after
connection completion. Because high voltage is applied
to the speaker terminals, never touch these terminals
to avoid electric shock.
Be sure to ground to the safety ground (earth)
terminal to avoid electric shock. Never ground to a gas
pipe as a catastrophic disaster may result.
Avoid installing or mounting the unit in unstable
locations, such as on a rickety table or a slanted
surface. Doing so may result in the unit falling down,
causing personal injury and/or property damage.
WARNING
Indicates a potentially hazardous situation which, if mishandled, could result in death or serious
personal injury.
CAUTION
Indicates a potentially hazardous situation which, if mishandled, could result in moderate or
minor personal injury, and/or property damage.
When the Unit is in Use.
Should the following irregularity be found during use,
immediately switch off the power, disconnect the
power supply plug from the AC outlet and contact your
nearest ArtSound dealer. Make no further attempt to
operate the unit in this condition as this may cause re
or electric shock.
If you detect smoke or a strange smell coming from
the unit.
If water or any metallic object gets int o the unit
If the unit falls, or the unit case breaks
If the power supply cord is damaged (exposure of
the core, disconnection, etc.)
If it is malfunctioning (no tone sounds.)
To prevent a re or electric shock, never open nor
remove the unit case as there are high voltage
components inside the unit. Refer all servicing to your
nearest ArtSound dealer.
Do not place cups, bowls, or other containers of
liquid or metallic objects on top of the unit. If they
accidentally spill into the unit, this may cause a re or
electric shock.
Do not insert nor drop metallic objects or ammable
materials in the ventilation slots of the unit’s cover, as
this may result in re or electric shock.


Specyfikacje produktu

Marka: Artsound
Kategoria: odbiornik
Model: MX-2406M

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Artsound MX-2406M, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje odbiornik Artsound

Artsound

Artsound PRL-1504 Instrukcja

7 Października 2024
Artsound

Artsound MX-120M Instrukcja

7 Października 2024
Artsound

Artsound MIKS6.4 Instrukcja

7 Października 2024
Artsound

Artsound PRH-4350 Instrukcja

7 Października 2024
Artsound

Artsound PRH-4240 Instrukcja

7 Października 2024
Artsound

Artsound PM-2S01 Instrukcja

7 Października 2024
Artsound

Artsound MX-60 Instrukcja

7 Października 2024
Artsound

Artsound MX-2406M Instrukcja

7 Października 2024
Artsound

Artsound MAT-8000 Instrukcja

7 Października 2024
Artsound

Artsound MX-5006M Instrukcja

7 Października 2024

Instrukcje odbiornik

Najnowsze instrukcje dla odbiornik

Denon

Denon AVR-S900W Instrukcja

15 Października 2024
Pro-Ject

Pro-Ject Amp Box DS2 Instrukcja

15 Października 2024
AKG

AKG HP12U Instrukcja

15 Października 2024
Apart

Apart SBR160 Instrukcja

14 Października 2024
American Audio

American Audio VLP 600 Instrukcja

14 Października 2024
Chord

Chord Anni Instrukcja

14 Października 2024
Sennheiser

Sennheiser EM 9046 SU Instrukcja

14 Października 2024
Yamaha

Yamaha MusicCast RX-V481 Instrukcja

13 Października 2024
JL Audio

JL Audio VX600/6i Instrukcja

12 Października 2024
Pioneer

Pioneer SX-303RDS Instrukcja

10 Października 2024