Instrukcja obsługi ART M-One

ART mikrofon M-One

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla ART M-One (2 stron) w kategorii mikrofon. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/2
M-One/USB Owner’s Manual
Zero-latency USB Condenser Microphone w/ Headphone Output
Overview:
The ART M-One/USB is a Class-A FET condenser USB microphone designed to direct connect to any
USB 2.0 equipped computer or laptop. The 32mm gold sputtered/center-terminated wide diaphragm
capsule delivers a full 20Hz to 20kHz frequency response, rivaling standard studio condenser
microphones.
The ART M-One/USB offers the added convenience of an internal 24bit / 96kHz digital conversion direct
to the USB2.0 output, making it the ideal microphone for software based recording solutions or
Podcasting. The M-One/USB operates on both Windows and Mac platforms.
What makes the M-One/USB unique is the integrated D/A converter that makes the microphone in effect
its own audio interface. The D/A converter provides computer playback to the 1/8th-inch headphone
output jack with volume and mix controls integrated into the microphone chassis. The volume control sets
the overall listening level in the headphones, while the mix control allows the user to blend the computer
audio (playback mix) and source (microphone input) to the headphones mix, offering a zero-latency
recording solution.
Features:
Studio Quality 32mm Gold Sputtered Cardioid Capsule
USB 2.0 / 24Bit / 96kHz Output
Integrated Stereo Headphone Output w/ Level and Mix Controls
Compatible with Windows 2k, WindowsXP, Windows7, Linux and Mac OS-X Operating Systems
Rugged Zinc/Aluminum Chassis & Stainless Steel Wire Mesh Windscreen
Hard-tail Microphone Standmount Included
Installation and Operation
Installing the M-One/USB is a simple procedure. Since the M-One/USB is USB compliant, you can use
either a Mac running OS-X or any PC running WindowsXP or later. Simply connect the microphone to a
standard USB port using the included USB cable and plug and play. You will be able to control your M-
One/USB using the standard audio interface controls in the Mac OS or Windows operating system.
Since it is possible to adjust the level of the signal from the operating system preferences, and in your
recording software, it's a good idea to be familiar with these controls in the Mac or Windows operating
system. Therefore, we recommend that you follow the enclosed instructions for either Windows XP or
Mac OS-X before installing the M-One/USB software driver.
Any 1/8th-inch TRS headphone our earbud can be connected to the headphone output. It is advised to
set the playback level to zero when connecting the microphone to any USB input when headphones are
connected.
Setting up the M-One/USB in Mac OS-X
Plug in microphone. The LED will light to indicate it is receiving USB power. The Mac will
recognize the USB audio device and automatically install a universal driver.
To select the M-One/USB as the computers audio input, open the System Preferences from the
dock or the main Apple Menu
Next open the Sound preference
Now, click in the Input tab and Output Tab to select M-OneUSB
Setting up the M-One/USB in Windows XP
(with Service Pack 2 - other versions may vary slightly.)
Plug in microphone. The LED will light to indicate it is receiving USB power. WindowsXP will
recognize the USB audio device and automatically install the universal drivers
The M-One/USB is now recognized as a Windows audio device under the name USBMIC. To set
it as the default device and change computer-controlled gain, access control panel.
Access Sounds and Audio Devices through Control Panel.
Select M-OneUSB as Sound recording device in the Audio tab window. You may also have to
select the microphone in most pro audio programs where multiple devices must be set within the
program.
To set the microphone Gain, click the Volume button. The Wave In window sets the computer
controlled gain, pan and microphone mute.
Select M-OneUSB as the Output Device in the Audio Tab Window and set level.
Powering the M-One/USB
The M-One/USB is a condenser microphone, and like all condenser microphones, it has internal
electronics that require an active power supply. Traditional studio condensers are almost always powered
by a Phantom Power supply, from a mixing console or external pre-amp. The M-One/USB receives its
power from the USB bus. Simply connect the microphone to the computer’s USB port and the
microphone is ready to operate. The M-One/USB features a blue power LED, which will illuminate when
USB power is present.
Microphone Placement
A cardioid polar pattern like that used in the M-One/USB is generally the standard for most applications. A
cardioid pattern will deliver best results on most vocal recordings and on a wide range of solo
instruments. It offers full frequency response on the front of the microphone and the advantage of
proximity effect (increased low frequency response when microphone is placed close to sound source*).
A cardioid pattern also provides excellent noise rejection from the sides and back, or 180-degree position
of the microphone, minimizing feedback and interference from other audio sources.
*Vocalists can use the proximity effect to their advantage, adding fullness and more 'bottom end' to the
voice as they move closer to the microphone. Experienced vocalists can easily incorporate it as part of
their overall microphone technique. Experimentation with mic placement during the recording process is
the key.
It may be advised that in some applications that a pop filter like the ART M-WS be employed to reduce
overly prominent “P” and “B” sounds.
Specifications:
Type: Side Address Cardioid Condenser USB Microphone
Capsule: 32mm Wide Diaphragm Gold Sputtered Capsule
Integrated Headphone Output: 1/8th-inch TRS Stereo Jack
Controls: Headphone Level, Microphone/Playback Mix Level
Analog-to-Digital Conversion: 24-bit / 96 kHz sampling rate
Frequency Response: 20Hz to 20kHz
MAX SPL: 135dB
S/N Ratio: 78dB
Sensitivity: -35dB (+/-2dB)
Output: USB Type 2.0 (3m cable included)
Included Accessories: Leather zipped bag, Shockmount, 3m (10’) USB Cable
Dimensions: 37mm x 175mm / 1.5 inches x 6.9 inches
Weight 16oz / 469g

Specyfikacje produktu

Marka: ART
Kategoria: mikrofon
Model: M-One

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z ART M-One, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje mikrofon ART

ART

ART AR5 Instrukcja

2 Października 2024
ART

ART D7 Instrukcja

29 Września 2024
ART

ART M-Three Instrukcja

12 Września 2024
ART

ART M-One Instrukcja

6 Września 2024
ART

ART M-Five Instrukcja

5 Września 2024
ART

ART M-Four Instrukcja

4 Września 2024
ART

ART Phantom II Pro Instrukcja

3 Września 2024
ART

ART M-One/USB Instrukcja

2 Września 2024
ART

ART C3 Instrukcja

2 Września 2024
ART

ART C1 Instrukcja

29 Sierpnia 2024

Instrukcje mikrofon

Najnowsze instrukcje dla mikrofon

Voice Technologies

Voice Technologies VT860 mkII Instrukcja

11 Grudnia 2024
Voice Technologies

Voice Technologies VT106HOF Instrukcja

11 Grudnia 2024
Voice Technologies

Voice Technologies VT403 Instrukcja

11 Grudnia 2024
Voice Technologies

Voice Technologies VT800 Instrukcja

11 Grudnia 2024
Vocopro

Vocopro AIR-NET Instrukcja

11 Grudnia 2024
ClearOne

ClearOne Ceiling Microphone Array Instrukcja

11 Grudnia 2024
Point Source Audio

Point Source Audio Series9 GO-9WL Instrukcja

11 Grudnia 2024
Neumann

Neumann KM 56 Instrukcja

10 Grudnia 2024
Alfatron

Alfatron ALF-BM10 Instrukcja

10 Grudnia 2024
Phonic

Phonic SPM-1 Instrukcja

10 Grudnia 2024