Instrukcja obsługi ART HP-1

ART odbiornik HP-1

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla ART HP-1 (8 stron) w kategorii odbiornik. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/8
ARTcessories
IMPORTANT SAFETY INSTRUCTION – READ FIRST
This symbol, whenever it appears alerts you to the
presence of uninsulated dangerous voltage inside the
enclosure-voltage that may be sufficient to constitute
a risk of shock.
This symbol, whenever it appears, alerts you to
important operating and maintenance instructions in
the accompanying literature. Please read the manual.
Read Instructions: Retain safety and operating instructions for
future reference. Heed all warnings printed here and on the
equipment. Follow the operating instructions printed in this user
manual.
Environment: Protect from excessive dirt, dust, heat, and
vibration when operating and storing. Avoid tobacco ash, drink
spillage and smoke, especially that associated with smoke
machines.
Handling: Protect the controls from damage during transit. Use
adequate padding if you need to ship the unit. To avoid injury to
yourself or damage to the equipment, take care when lifting,
moving or carrying the unit.
Servicing: Refer servicing to qualified technical personnel.
Installation: Install the unit in accordance with the instructions
printed in the user manual.
3
CONNECTIONS
1. The input Combo jack, for connections to a monitor mix as
an example. Accepts both XLR and TRS ¼-inch jacks.
2. The Volume knob controls the output level and will power
down the HP-1, when turned fully counterclockwise.
3. The green led will light when the power is on and acts as
a battery indicator. Replace the batteries when red.
4. The Headphone output has a 1/8” stereo jack.
5. The Belt clip attaches to a belt or pant waistline for hands-
free use.
6. The Battery storage area button. Pressing the button and
sliding the shell toward the headphone jack opens the
compartment.
7. The Battery storage section allows the unit to be powered
by a pair of AA batteries. Please observe the correct
polarity when inserting new batteries.
8. The switch should be set to mono when you are using the
HP-1 with a mixer’s aux send or any other mono source
(near battery position) and set to stereo when you are
connected to a headphone output or other stereo sources
(near input connector).


Specyfikacje produktu

Marka: ART
Kategoria: odbiornik
Model: HP-1

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z ART HP-1, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje odbiornik ART

ART

ART MPA Gold Instrukcja

21 Września 2024
ART

ART DJ Pre II Instrukcja

4 Września 2024
ART

ART TransX Instrukcja

3 Września 2024
ART

ART HeadAMP V Instrukcja

24 Sierpnia 2024
ART

ART HeadAmp 4 Pro Instrukcja

22 Sierpnia 2024
ART

ART SLA-1 Instrukcja

22 Sierpnia 2024

Instrukcje odbiornik

Najnowsze instrukcje dla odbiornik