Instrukcja obsługi APC SMX040


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla APC SMX040 (8 stron) w kategorii Kable do komputerów PC i urządzeń peryferyjnych. Ta instrukcja była pomocna dla 7 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/8
Smart-UPS
®
X-Series 120 VDC
External Battery Pack Installation
Inventory
Safety and General Information
Read the Safety Guide included in the package before installation.
This unit is intended for indoor use only.
Do not operate this unit in direct sunlight, in contact with fluids, or where there is excessive dust or humidity.
Be sure the air vents on the external battery packs (XLBPs) are not blocked. Allow adequate space for proper
ventilation.
The battery typically lasts for two to five years. Environmental factors impact battery life. Elevated ambient
temperatures, poor quality utility power, and frequent short duration discharges will shorten battery life.
Always install the XLBPs at the bottom of the rack. The UPS must be installed above the XLBPs.
Specifications
For additional specifications, refer to the APC web site at www.apc.com.
Environmental
(1) (1) (6) (4) (1)
(1) (2) (2) (2)
Temperature
Operating 0° to 40° C (32° to 104° F)
Storage -15° to 45° C (5° to 113° F)
charge UPS battery every six months
Maximum
Elevation
Operating 3,000 m (10,000 ft)
Storage 15,000 m (50,000 ft)
Humidity
0% to 95% relative humidity, non-condensing
su0577b
s
u
0
4
3
4
a
Smart-UPS X-Series XLBP2
Installation
Electrical Hazard:
Before installing or replacing the batteries, remove jewelry such as
wristwatches and rings. High short-circuit current through conductive materials could cause
severe burns.
• The Smart-UPS unit will recognize up to ten XLBPs using the display interface, however there is
no limit to the number of XLBPs that can be used with the UPS.
• Always install the XLBPs below the UPS in a rack configuration.
• Connect all battery strings. Failure to do so may cause equipment damage.
Remove the Shipping Brackets
Remove the battery
Each battery weighs 23 kg (51 lbs). Remove the batteries before installation in a
rack.
1 2
1 2
3 4
su0
7
3
8
c
s
u
0
7
3
8
d
s
u
0
5
7
4
a
s
u
0
5
7
4
b
s
u
0
5
8
4
a
s
u
0
5
7
3
a
Smart-UPS X-Series XLBP 3
Four-post rack installation
Rack-mount brackets may differ by model.
Two-post rack
1 2
Use the APC Four-Post Rail Kit.
3 4
5 6
1 2
s
u
0
4
4
0
a
s
u
0
5
7
0
a
s
u
0
5
7
1
a
s
u
0
5
7
8
a
s
u
0
5
7
2
a
s
u
0
5
7
5
a


Specyfikacje produktu

Marka: APC
Kategoria: Kable do komputerów PC i urządzeń peryferyjnych
Model: SMX040

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z APC SMX040, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Kable do komputerów PC i urządzeń peryferyjnych APC

APC

APC AR7586 Instrukcja

8 Października 2024
APC

APC AP8704R-NA Instrukcja

8 Września 2024
APC

APC AP9810 Instrukcja

5 Września 2024
APC

APC AP98275 Instrukcja

30 Sierpnia 2024
APC

APC AP8706R-NA Instrukcja

30 Sierpnia 2024
APC

APC SMX040 Instrukcja

27 Sierpnia 2024
APC

APC AR7585 Instrukcja

18 Sierpnia 2024
APC

APC AR7589 Instrukcja

6 Lipca 2024

Instrukcje Kable do komputerów PC i urządzeń peryferyjnych

Najnowsze instrukcje dla Kable do komputerów PC i urządzeń peryferyjnych