Instrukcja obsługi Antari Z-800II


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Antari Z-800II (40 stron) w kategorii Maszyna efektów. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/40
Z-800II / Z-1000II / Z-1020
Fog Machine User Manual
© 2018 Antari Lighting and Effects Ltd.
3
User Manual
Z-800II & 1000II & Z-1020 Fog Machine
Congratulations on the purchase of your new
ANTARI Z-Series II FOG MACHINE.
Introduction
Thank you for choosing an ANTARI Z-Series II Fog Machine. You now own a rugged and powerful state-of-
the-art machine. Prior to use, we suggest that you carefully read all of the instructions. By following the
suggestions found in this user manual, you can look forward to the reliable and satisfactory performance of
your ANTARI Fog Machine for years to come.
Please follow these operation, safety and maintenance instructions to ensure a long and safe life for your fog
machine.
CAUTION:
Risk of electric shock. Disconnect the appliance from the electric supply before refilling liquid, cleaning, or
performing maintenance on the machine.
Danger of Electric Shock
Don’t immerse in water. Keep this device dry.
Household Use only. Not designed for outdoor use.
For all models, use a 3-prong grounded electrical outlet only. Prior to use make sure to determine that the
unit is installed at the rated voltage.
Always unplug your ANTARI Z-Series II Fog Machine before filling its tank.
Always keep the fog machine in upright position.
Turn off or unplug the machine when not in use.
This machine is not water-proof. Don’t immerse in water .If moisture, water, or fog fluid gets inside the
housing, immediately unplug the unit and contact a service technician or your ANTARI dealer before using
it again.
No user serviceable parts inside. Refer to your ANTARI dealer or other qualified service personnel.
Danger of Burns
This device is for adult use only and must be installed out of the reach of children. Never leave the unit
running unattended.
Never aim the output nozzle directly at people.
Fog machine output is very hot. Avoid coming within 50 cm of the output nozzle during operation.
Operate the fog machine in a well-ventilated area. Never cover the unit’s vents. In order to guarantee
adequate ventilation, allow a free air space of at least 20 cm around the sides and top of the unit.
Never aim the output nozzle at open flames.


Specyfikacje produktu

Marka: Antari
Kategoria: Maszyna efektów
Model: Z-800II

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Antari Z-800II, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Maszyna efektów Antari

Antari

Antari Z-4 Instrukcja

5 Marca 2025
Antari

Antari W-1 Instrukcja

5 Marca 2025
Antari

Antari SC-3 Instrukcja

5 Marca 2025
Antari

Antari LCU-2S Instrukcja

27 Stycznia 2025
Antari

Antari Z-800II Instrukcja

27 Stycznia 2025
Antari

Antari FT-70 Instrukcja

5 Grudnia 2024
Antari

Antari F-7X Instrukcja

8 Października 2024
Antari

Antari S-120 Instrukcja

28 Września 2024
Antari

Antari MB-55 Instrukcja

20 Września 2024
Antari

Antari Z-1500 MK2 Instrukcja

19 Września 2024

Instrukcje Maszyna efektów

Najnowsze instrukcje dla Maszyna efektów