Instrukcja obsługi Antari Z-1000 MK2
Antari
Maszyna efektów
Z-1000 MK2
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Antari Z-1000 MK2 (24 stron) w kategorii Maszyna efektów. Ta instrukcja była pomocna dla 9 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/24
Z- -800II, Z 1000II & Z -1020 USER MANUAL
Z-800II, Z- -1000II und Z 1020 BEDIENUNGSANLEITUNG
MODE D’EMPLOI des Z -800II, Z-1000II et Z-1020
Congratulations on the purchase of your new
ANTARI Z-SERIES II FOG MACHINE.
Wir beglückwünschen Sie zum Kauf Ihres neuen ANTARI Z -SERIES NEBELGERÄTES.
Nous vous félicitons pour l’achat de votre nouvelle
Z-SERIES machine à fumée d’ANTARI.
♦ Read and save these instructions
♦ Bitte lesen Sie diese Anweisungen und bewahren Sie sie gut auf
♦ Lisez et Gardez ces instructions
2006 Antari Lighting and Effects Ltd.
2
TeUser Manual
Antari Z 800II, Z-1000II & Z-1020 Fog Machine
Congratulations on the purchase of your new
ANTARI Z-Series II FOG MACHINE.
Introduction
Thank you for choosing a ANTARI Z-Series II Fog Machine. You now own a rugged and powerful state-of- -the art
machine. Prior to use, we suggest that you carefully read all of the instructions. By following the suggestions
found in this user manual, you can look forward to the reliable and satisfactory performance of your ANTARI Fog
Machine for years to come.
Please follow these operation, safety and maintenance instructions to ensure a long and safe life for your fog
machine.
CAUTION:
Risk of electric shock. Disconnect the appliance from the electric supply before refilling liquid, cleaning or
performing maintenance on the machine.
Danger of E Slectric hock
♦ Keep this device dry.
♦ For inside use only. Not designed for outside use.
♦ For the 110V models, use 3-prong grounded electrical outlet only. Prior to use take care to determine that the
unit is installed at the rated voltage.
♦ Always unplug your ANTARI Z-Series II Fog Machine before lling its tank.
♦ Always k eep fog machine in upright position.
♦ Turn off or unplug the machine when not in use.
♦ This machine is not water-proof. If moisture, water, or fog fluid gets inside the housing, immediately unplug the
unit and contact a service technician or your ANTARI dealer before using it again.
♦ No user serviceable parts inside. Refer to your ANTARI dealer or other qualified service personnel.
Danger of Burns
♦ This device is for adult use only and must be installed out of the reach of children. Never leave the unit running
unattended.
♦ Never aim the output nozzle directly at people.
♦ Fog machine output is very hot. Avoid coming within 60 cm of the output nozzle during operation.
♦ Locate the fog machine in a well-ventilated area. Never cover the unit’s vents. In order to guarantee adequate
ventilation, allow a free air space of at least 20 cm around the sides and top of the unit.
3
♦ Never aim the output nozzle at open flames.
♦ If the supply cord is damaged, it must be replaced by manufacturer or its service agent or similarly qualified
personnel in order to avoid a hazard.
♦ The output nozzle becomes very hot during operation (200°C). Keep flammable materials at least 50 cm away
from the nozzle.
♦ Always allow your ANTARI Fog Machine to cool down before attempting to clean or service it.
Danger of Explosion
♦ Never add flammable liquids of any kind (such as oil, gas, perfume) to the fog liquid.
♦ Use only high-quality, water-based fog liquid that your dealer recommends. Other fog liquids may cause
clogging or “spitting”.
♦ Always make sure there is sufficient liquid in the tank. Operating this unit without liquid will cause damage to
the pump as well as over-heating of the heater.
♦ If your ANTARI Z-800II, Z-1000II and Z-1020 Fog Machine fails to work properly, discontinue use immediately.
Drain all fog liquid from the tank, pack the unit securely (preferably in the original packing material), and return
it to your ANTARI dealer for service.
♦ Always drain tank before mailing or transporting this unit.
♦ Never drink fog liquid. If it is ingested, call a doctor immediately. If fog liquid comes in contact with skin or
eyes, rinse thoroughly with water.
Note: Pay attention to all warning labels and instructions printed on the exterior of your ANTARI Fog Machine
Unpacking & Inspection
Open the shipping carton and verify that all equipment necessary to operate the system has arrived intact.
The shipping carton should contain the following items:
1. One unit of Z-Series II Fog Machine
2. Power cord
3. Z-10 Remote Control
4. User Manual
5. Mounting brackets with washers/screws (for Z-1000II)
If any equipment is missing contact your ANTA RI dealer immediately.
Before beginning your initial setup on ANTARI Z-800II, Z-1000II or Z-1020 Fog Machine, make sure that there is no
evident damage caused by transportation. In the event that the unit’s housing or cable is damaged, do not plug it
in and do not attempt to use it until after contacting your ANTARI dealer for assistance.
Setup
♦ Remove all packing materials from shipping box. Check that all foam and plastic padding is removed,
especially in the nozzle area.
♦ Place fog machine on a flat surface and remove fog liquid tank cap.
♦ Fill with high- -quality, water based fog liquid recommended by ANTARI dealer. Any other types of fluid can
damage the unit resulting in spitting and serious clogging problem . When filled, place cap back on liquid tank .
Be careful not to exceed the maximum fluid level. DO NOT OVERFILL.
♦ Firmly attach the remote control cable to the proper input on the back of the machine.
Operation
♦ Add fluid carefully to the liquid tank. Do not overfill the tank.
♦ Plug power cord into a grounded electrical outlet. Turn the power switch to “ON” on the back of the machine.
The unit will take a couple of minutes to warm up the heater. During this time the machine cannot generate
fog. When the remote control is attached the red lights (on Z-800II handle) and green light (on the remote) will
flash and stay ON when the warm-up time is complete.
Specyfikacje produktu
| Marka: | Antari |
| Kategoria: | Maszyna efektów |
| Model: | Z-1000 MK2 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Antari Z-1000 MK2, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Maszyna efektów Antari
8 Października 2024
28 Września 2024
20 Września 2024
19 Września 2024
17 Września 2024
16 Września 2024
16 Września 2024
16 Września 2024
15 Września 2024
14 Września 2024
Instrukcje Maszyna efektów
- Maszyna efektów BeamZ
- Maszyna efektów Behringer
- Maszyna efektów American DJ
- Maszyna efektów Chauvet
- Maszyna efektów Eurolite
- Maszyna efektów Velleman
- Maszyna efektów Manta
- Maszyna efektów Showtec
- Maszyna efektów Klark Teknik
- Maszyna efektów Doepfer
- Maszyna efektów Cameo
- Maszyna efektów Lotronic
- Maszyna efektów Elation
- Maszyna efektów Futurelight
- Maszyna efektów Martin
- Maszyna efektów Monacor
- Maszyna efektów HQ Power
- Maszyna efektów Magmatic
- Maszyna efektów Technical Pro
- Maszyna efektów Adj
- Maszyna efektów Steren
- Maszyna efektów Valcom
- Maszyna efektów QTX
- Maszyna efektów Valueline
- Maszyna efektów Fredenstein
- Maszyna efektów Max
- Maszyna efektów Monoprice
- Maszyna efektów ColorKey
- Maszyna efektów Black Lion Audio
- Maszyna efektów Laserworld
- Maszyna efektów JB Systems
- Maszyna efektów Evo-Lite
- Maszyna efektów Blizzard
- Maszyna efektów Hazebase
- Maszyna efektów Sagitter
- Maszyna efektów Fun Generation
- Maszyna efektów IMG Stage Line
- Maszyna efektów Lexicon
- Maszyna efektów The Confetti Maker
- Maszyna efektów BoomTone DJ
- Maszyna efektów TCM FX
Najnowsze instrukcje dla Maszyna efektów
10 Października 2024
8 Października 2024
8 Października 2024
8 Października 2024
8 Października 2024
8 Października 2024
8 Października 2024
8 Października 2024
8 Października 2024
8 Października 2024