Instrukcja obsługi Antari S-600


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Antari S-600 (44 stron) w kategorii Maszyna efektów. Ta instrukcja była pomocna dla 8 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/44
2
© 2021 Antari Lighting and Effects Ltd. www.antari.com
User Manual
1. Introduction
Please read this user manual carefully before operating the machine.
Please put this manual in a place where you can refer to it at any time.
If you encountered any problems, please contact your local Antari dealer for advice and assistance.
2. Safety Information
CAUTION!
Please read the following safety information carefully before operating the machine.
This information includes important safeguards about installation, usage and
maintenance. Pay attention to all warning labels and instructions in this manual and
printed on the machine.
DANGER!
Electrical shock
Always connect the machine to correct voltage. It will lead to
electrical shock or
burned and may cause serious consequences if connecting to incorrect or improper
voltage.
WARNING!
Risk of electrocution
Always connect the machine to a protected circuit and ensure it is properly grounded
to avoid risk of electrocution.
※ Damage caused by the disregard of this user manual are not subject to warranty. Antari and its
dealer will not accept liability for any resulting defects or problems.


Specyfikacje produktu

Marka: Antari
Kategoria: Maszyna efektów
Model: S-600

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Antari S-600, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Maszyna efektów Antari

Antari

Antari Z-4 Instrukcja

5 Marca 2025
Antari

Antari W-1 Instrukcja

5 Marca 2025
Antari

Antari SC-3 Instrukcja

5 Marca 2025
Antari

Antari FT-70 Instrukcja

5 Grudnia 2024
Antari

Antari F-7X Instrukcja

8 Października 2024
Antari

Antari S-120 Instrukcja

28 Września 2024
Antari

Antari MB-55 Instrukcja

20 Września 2024
Antari

Antari Z-1500 MK2 Instrukcja

19 Września 2024
Antari

Antari Z-9 Instrukcja

17 Września 2024
Antari

Antari DNG-250 Instrukcja

16 Września 2024

Instrukcje Maszyna efektów

Najnowsze instrukcje dla Maszyna efektów