Instrukcja obsługi Antari B-100

Antari Maszyna efektów B-100

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Antari B-100 (7 stron) w kategorii Maszyna efektów. Ta instrukcja była pomocna dla 8 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/7
1
User Manual for the B-100(X) Bubble Machine
♦ Save and read these instructions
♦ Bitte lesen Sie und sichern Sie diese Anweisungen
♦ Lisez et Gardez ces instructions
©
©
©
©© 2007 Antari Lighting and Effects Ltd.
2
Antari Bubble Machine
Thank you for choosing the Antari Bubble Machine. You now own a rugged
and powerful state-of-the-art machine. Prior to use, we suggest that you
carefully read all of the instructions. By following the suggestions found in this
user manual, you can look forward to exceptional performance from your Antari
Bubble Machine for years to come.
Please follow these operation, safety and maintenance instructions to
ensure a long and safe life for your Antari Bubble Machine.
Specifications
Power: AC 120V/60Hz (120V Model)
AC 230V/50Hz (230V Model)
Fuse: F2A/250V (120V Model)
T1A/250V (230V Model)
Dimensions (mm): 236.6 x 189.2 x 150
Weight: Net – 3.4 kg, Gross – 4.5 kg
CAUTIONS
Pay attention to all warning labels and instructions printed on the exterior
of your Antari Bubble Machine
Do not overfill your bubble machine. Overfilling will cause the unit to leak.
Danger of electric shock
Keep this device dry.
Keep the bubble machine upright.
For the 110V models, use 3-prong grounded electrical outlet only. Prior to
use take care to determine that the unit is installed at the rated voltage.
Turn off or unplug when not in use.
The power plug needs to be clearly seen by user when installed on the wall.
This machine is not water-proof or splash-proof. If moisture, water, or any
liquid gets inside the housing, immediately unplug the unit and contact a
service technician or your dealer before using it again.
No user serviceable parts inside. Refer to your Antari dealer or other
qualified service personnel.
For indoor use only. Not designed for outdoor use.
This appliance must be earthed.
For adult use only. The bubble machine must be installed out of the reach
of children. Never leave the unit running unattended.
Never aim the output at open flames.
Extended use will make all surfaces slippery.
Position output of bubbles away from persons.
Switch off from mains when refilling the liquid or cleaning the system.
Regular cleaning of the bubble wheel is required.
Do not transport with liquid. If the machine get wet, do not use until it is
completely dry.
Antari bubble liquid may leave permanent marks on clothing.
3
Pay attention to all warning labels and instructions printed on the exterior
of your Antari Bubble Machine.
Unpacking & Inspection
Open the shipping carton and check that all equipment necessary to operate the
system has arrived intact. In addition to the Antari Bubble Machine, you should
receive the following items:
1. This user manual.
2. Power cord and plug.
Before beginning initial setup of your Antari Bubble Machine, make sure that
there is no evident damage caused by transportation.
In the event that the unit’s housing or cable is damaged, do not plug it in and
do not attempt to use it until after contacting your dealer for assistance.
Setup
Remove all packing materials from the bubble machine.
Place bubble machine on a flat surface.
Loosen the side screws and lift the housing upwards. You will see a liquid
tank.
Pour bubble liquid into the liquid tank, being careful not to exceed the
maximum fluid level. DO NOT OVERFILL.
When the container is full, lower the housing and tighten the screws.
IMPORTANT SAFETY NOTICE:
Ensure your bubble machine is unplugged from the mains electrical supply
before attempting to open the housing.
To help avoid accidental exposure to dangerous live AC mains voltage, two
safety screws are fitted that require a screwdriver to remove. Once these are
removed, the finger screws can be undone by hand (see photo above).
Once the screws are removed, the lid of the housing can be carefully swung
upwards, as shown above. Take care not to spill any of the bubble fluid inside
the unit.

Specyfikacje produktu

Marka: Antari
Kategoria: Maszyna efektów
Model: B-100

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Antari B-100, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Maszyna efektów Antari

Antari

Antari F-7X Instrukcja

8 Października 2024
Antari

Antari S-120 Instrukcja

28 Września 2024
Antari

Antari MB-55 Instrukcja

20 Września 2024
Antari

Antari Z-1500 MK2 Instrukcja

19 Września 2024
Antari

Antari Z-9 Instrukcja

17 Września 2024
Antari

Antari DNG-250 Instrukcja

16 Września 2024
Antari

Antari F-80 Instrukcja

16 Września 2024
Antari

Antari Z-3000 MK2 Instrukcja

16 Września 2024
Antari

Antari M-10 Instrukcja

15 Września 2024
Antari

Antari HCR-1 Instrukcja

14 Września 2024

Instrukcje Maszyna efektów

Najnowsze instrukcje dla Maszyna efektów

Velleman

Velleman vdl660rl Instrukcja

10 Października 2024
Valcom

Valcom V-5580041A Instrukcja

8 Października 2024
Magmatic

Magmatic Magma Fog 1500IP-II Instrukcja

8 Października 2024
Magmatic

Magmatic PMDMX1 Instrukcja

8 Października 2024
Magmatic

Magmatic CRISP Instrukcja

8 Października 2024
Magmatic

Magmatic CRISP MAX Instrukcja

8 Października 2024
Magmatic

Magmatic SIDEWINDER Instrukcja

8 Października 2024
Magmatic

Magmatic JAVELIN Instrukcja

8 Października 2024
Magmatic

Magmatic MAGMA FOG 1500 IP Instrukcja

8 Października 2024
BeamZ

BeamZ BLAZE3500 Instrukcja

8 Października 2024