Instrukcja obsługi Anker SOLIX F3800

Anker Nie skategoryzowane SOLIX F3800

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Anker SOLIX F3800 (7 stron) w kategorii Nie skategoryzowane. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/7

What's in the Box

Overview

Product Overview

LCD Screen Guide

Recharging Your Power Station

AC Recharging (1800W Max)

Solar Panel Recharging (2400W Max)

Car Recharging (120W)

Powering On / Oﬀ

Powering Your Devices

AC Charging

USB Charging

Car Socket Charging

Uninterruptible Power Supply (UPS)

Connect With an Expansion Battery

Connect with Anker SOLIX Home Power Panel

Anker App for Smart Control

Light

Carry Your Power Station

FAQ

Speciﬁcations

What's in the Box

Overview

Product Overview

On/Oﬀ Button Display Button

USB Ports IoT Button

Car Socket Car Socket Button

NEMA 14-50 AC Output Port NEMA L14-30R AC Output Port

NEMA 5-20R AC Output Ports (Left three ports have UPS

function) Overcharge Protection (AC Output)

Home Panel Power Port AC Input Port

Overcharge Protection (AC Input) Dual Solar Input and Car Input

Expansion Battery Port Wheels

Wheel Brake Retractable Handle (Press the button on the retractable

handle and pull to extend)

Bottom Handle AC Outlet Button

LCD Screen Guide

Remaining Battery for Power Station and Expansion Battery

Overload Warning

This icon appears when a port is overloaded. The port will turn oﬀ to avoid any damage. Please remove the device causing overload.

Current Output Power

Current Input Power

Whole-Home Power Mode

USB-A Output Port

USB-C Output Port

Car Charging

IoT

Press the IoT button for 2 seconds and connect your devices through the app when this icon appears on the screen.

AC Charge and Voltage Frequency

Electrical Vehicle Charging

Number of Expansion Battery Connected

When the expansion battery is connected successfully, this icon appears on the screen.

Estimated Time to Fully Recharge

Estimated Time for Battery to Deplete

Low-Temperature Alert

When this icon shows, stop using the power station until the icon disappears.

High-Temperature Alert

When this icon shows, stop using the power station and let it cool down until the icon disappears.

Recharging Your Power Station

When your portable power station only has 1% battery remaining, the "Remaining Battery" indicator will icker to remind you to recharge.

AC Recharging (1800W Max)

Recharge your power station by connecting to a wall outlet with the AC charging cable.

Solar Panel Recharging (2400W Max)

Recharge your power station with a maximum solar input of 2400W.

The solar input voltage range for Anker SOLIX F3800 is 11-60V. Please ensure the voltage of

connected solar panels is within this range. Voltage exceeding 60V will damage the product.

If an extension cable is required to connect the solar panels to the portable power station,

purchase Anker SOLIX Solar Panel Charging Cable from the Anker oﬃcial website. Connect it as

indicated by the dotted line in the diagram.

Car Recharging (120W)

Recharge your power station by connecting to a car's output port with the car charging cable (not included).

Anker SOLIX F3800 Portable Power Station only supports 12V car recharging. 24V car recharging cannot be

used.

Powering On / Oﬀ

Press the ON/OFF button for 3 seconds to turn your power station on or oﬀ.

When the "Remaining Battery" indicator shows on the LCD screen, your power station is ready to charge devices.

When powered on, press the DISPLAY button to turn the screen on or oﬀ.

The auto-oﬀ time can be set in the Anker app.

The power station will power oﬀ automatically if the output buttons are turned oﬀ and no power

loads are detected for 12 hours. The standby duration can be set in the Anker app.

Powering Your Devices

To ensure safe power supply with the 240V AC ports, the neutral (N) and ground (PE) wires of the inlet box

or transfer switch must be properly connected. Missing neutral (N) and ground (PE) wires may cause

appliances damaged on the circuit.

AC Charging

•120V AC Port

Press the AC outlet button and connect your devices to the 5-20R output ports.

•240V AC Port

1. Press the AC outlet button and connect the power station to your inlet box or transfer switch via the L14-30R or 14-50 AC output port. It can supply 240V

power to devices.

To ensure safe power supply to your inlet box or transfer switch via the 240V AC ports, check and conrm that the neutral and ground wires of the inlet

box or transfer switch are properly connected.

2. Double-press the AC outlet button to turn on the EV mode, wait until the car icon appears on the screen, then connect your device to the L14-30R or 14-

50 AC output port. When the power station is in EV mode charging, it cannot be charged via AC simultaneously.