Instrukcja obsługi AMX HPG-20

AMX Niesklasyfikowane HPG-20

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla AMX HPG-20 (2 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/2
QUICK START GUIDE
HPG-20 HydraPort 2-inch Grommet
Overview
The HPG-20 family of 2-inch Grommets (FG570-02m-cc) are an elegant means to
control cables in conference rooms, meeting rooms and personal workspaces.
They are designed to be mounted into a horizontal surface such as a conference room
table, desk or lectern in order to manage Audio/video, power and or networking cables.
AMX offers nine versions of the HPG-20 2-inch Grommet.
Product Specif ications
Installation
Tools Required
• Drill
• 2" Hole Saw (recommended brands: LENOX®, DEWALT®,
Milwaukee®)
CAUTION: This installation requires specific woodworking skills. This installation should
be performed by an experienced person, comfortable with these types of woodworking
operations. Improper installation may result in damage to the mounting surface. AMX is
not responsible for damage caused by improper installation.
Read these instructions in their entirety before beginning the installation. The
installation requires specific steps to be performed in specific order.
1) Select a Suitable Location For the HPG-20
Note the space requirements for installing the system (FIG. 2):
Note that the HPG-20 requires 0.2" (5mm) above the mounting surface.
FIG. 1 HPG-20 2" GROMMET
HPG-20 2-INCH GROMMETS
FG570-02-SL Matte Silver Plastic Top
FG570-02S-MB Matte Black in Silver Metal Top
FG570-02B-MB Matte Black in Black Metal Top
FG570-02S-GS Gloss Silver in Silver Metal Top
FG570-02B-GS Gloss Silver in Black Metal Top
FG570-02S-GB Gloss Black in Silver Metal Top
FG570-02B-GB Gloss Black in Black Metal Top
FG570-02S-FG Frosted in Silver Metal Top
FG570-02B-FG Frosted in Black Metal Top
HPG-20 SPECIF ICATIONS
Dimensions (HWD)
• Max above mounting surface: 1” (25mm)
• Max below mounting surface: 1.1” (28mm)
• Mounting surface footprint: 2.76” (70mm) Diameter
• Min. mounting surface thickness: 1/2" (13 mm)
• Max mounting surface thickness: 2-inch (51mm)
• Table Cutout Dimensions: 2-inch (51mm) Round Hole
Weight 6oz (.2 Kg)
Enclosure Black plastic structure with a top cap made of
plastic or metal with an acrylic inlay.
FIG. 2 HPG-20 INSTALLATION SPECIFICATIONS
1.575
[40,00]
2.000
[50, 80]
HOLE
.500
[12,70]
0.2” (5mm) above the mounting surface
© 2015 Harman. All rights reserved. HydraPort, AMX, AV FOR AN IT WORLD, HARMAN, and their respective logos are registered trademarks of
HARMAN. Oracle, Java and any other company or brand name referenced may be trademarks/registered trademarks of their respective
companies.
AMX does not assume responsibility for errors or omissions. AMX also reserves the right to alter specifications without prior notice at any time.
The AMX Warranty and Return Policy and related documents can be viewed/downloaded at www.amx.com.
3000 RESEARCH DRIVE, RICHARDSON, TX 75082 AMX.com | 800.222.0193 | 469.624.8000 | +1.469.624.7400 | fax 469.624.7153
AMX (UK) LTD, AMX by HARMAN - Auster Road, Clifton Moor, York, YO30 4GD United Kingdom • +44 1904-343-100 • www.amx.com/eu/
93-0570-01 REV: C
Last Revised: 8/11/2015
2) Drill The Hole In The Mounting Surface
Note: AMX recommends Lennox®, Dewalt® or Milwaukee® brand hole saws. Some lower
quality hole saws may make a hole larger than 2" (51mm) in diameter, which will cause
the HPG-20 to f it loosely in the hole. If in doubt, test the hole saw for proper f it before
drilling into the f inal mounting surface.
1. Carefully measure the tabletop or other mounting surface to locate the desired
position of the HPG-20.
Take care to ensure that the top surface of the mounting surface is not damaged
beyond the width of the trim bezel as the cutout is made.
2. Use an appropriate drill and 2" (51mm) hole saw to drill a 2" hole in the mounting
surface.
• Make sure cutting tool used is appropriate for the material to be cut and will not
tear or chip the top surface.
• Note that the process of making the cutout will create substantial dust and
prepare the environment appropriately.
3) Insert the Cables
For cables for which the far end of the cable is not accessible either because the cable
has been run under carpet, in a conduit or structure, or is otherwise fixed, the cable
must be placed through the cutout in the table prior to installation (FIG. 3).
1. Remove the top cap of the HPG-20 by gripping the threaded riser and rotating the
top cap counter clockwise.
2. Pass the cable through the mounting sleeve and the threaded riser.
3. Repeat as needed for additional cables.
4. Position the cables into one of the four open slots in the threaded riser.
5. Install the top cap by gripping the threaded riser and rotating the top cap
clockwise until the locking tabs are fully engaged.
6. Rotate the threaded riser in the mounting sleeve until the cables are properly
constrained between the top cap and the mounting sleeve.
4) Install the Grommet Into The Mounting Surface
Simply press the grommet with cables into the hole in the mounting surface.
• The fit of the grommet in the hole should be snug.
• Once in the mounting surface, the threads of the riser and mounting sleeve should
also be snug (FIG. 4).
FIG. 3 CABLE INSTALLATION
FIG. 4 TOPSIDE OF INSTALLED UNIT

Specyfikacje produktu

Marka: AMX
Kategoria: Niesklasyfikowane
Model: HPG-20

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z AMX HPG-20, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Niesklasyfikowane AMX

AMX

AMX HPG-20 Instrukcja

7 Grudnia 2024
AMX

AMX HPX-MSP-7-SL Instrukcja

8 Października 2024
AMX

AMX HPX-MSP-10-SL Instrukcja

8 Października 2024
AMX

AMX MXD-2000XL-PAN-NC Instrukcja

2 Października 2024
AMX

AMX CB-MSA-43 Instrukcja

2 Października 2024
AMX

AMX PSR2.5 Instrukcja

2 Października 2024
AMX

AMX MSA-MMK2-10 Instrukcja

2 Października 2024
AMX

AMX VARIA-150 Instrukcja

2 Października 2024
AMX

AMX VARIA-ACS-150A Instrukcja

2 Października 2024
AMX

AMX CB-MXP-07-F Instrukcja

2 Października 2024

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

Emos

Emos P5501 Instrukcja

11 Grudnia 2024
Ferrofish

Ferrofish A32pro Instrukcja

11 Grudnia 2024
Really Right Stuff

Really Right Stuff B2-LLR II Instrukcja

11 Grudnia 2024
Angler

Angler BB-RE-2436-V2 Instrukcja

11 Grudnia 2024
Raya

Raya LS-TT-SA Instrukcja

11 Grudnia 2024
Raya

Raya RAS Instrukcja

11 Grudnia 2024
Angler

Angler BB-ST-1024-V2 Instrukcja

11 Grudnia 2024
Ebro

Ebro GFX 460 Instrukcja

11 Grudnia 2024
Angler

Angler BB-48DB-V2 Instrukcja

11 Grudnia 2024
TP-Link

TP-Link TL-FC111B-20 Instrukcja

11 Grudnia 2024