Instrukcja obsługi American DJ VF Flurry
American DJ
maszyna oddziaływania
VF Flurry
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla American DJ VF Flurry (6 stron) w kategorii maszyna oddziaływania. Ta instrukcja była pomocna dla 23 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/6
User Instructions
Rev. 6/16
VF FLURRY
©2016 ADJ Products, LLC all rights reserved. Information,
specications, diagrams, images, and instructions herein are
subject to change without notice. ADJ Products, LLC logo and
identifying product names and numbers herein are trademarks
of ADJ Products, LLC. Copyright protection claimed includes all
forms and matters of copyrightable materials and information
now allowed by statutory or judicial law or hereinafter granted.
Product names used in this document may be trademarks or
registered trademarks of their respective companies and are
hereby acknowledged. All non-ADJ Products, LLC brands and
product names are trademarks or registered trademarks of their
respective companies.
ADJ Products, LLC and all aliated companies hereby dis-
claim any and all liabilities for property, equipment, building,
and electrical damages, injuries to any persons, and direct or
indirect economic loss associated with the use or reliance of
any information contained within this document, and/or as a
result of the improper, unsafe, unsucient and negligent as-
sembly, installation, rigging, and operation of this product.
Europe Energy Saving Notice
Energy Saving Matters (EuP 2009/125/EC)
Saving electric energy is a key to help protecting the enviroment.
Please turn o all electrical products when they are not in use. To
avoid power consumption in idle mode, disconnect all electrical
equipment from power when not in use. Thank you!
• Be sure to save the packing carton in the unlikely event the unit
may have to be returned for service
• Do not spill water or other liquids into or on to your snow machine.
Be sure that all the snow uid is kept inside the uid reservoir
• Be sure that the local power outlet match that or the required
voltage for your snow machine
• Do not remove the top cover under any conditions. There are no
user serviceable parts inside
• Disconnect the unit’s main power when left unused for long peri-
ods of time
• Never connect this unit to a dimmer pack
• Do not attempt to operate this unit, if it becomes damaged in anyway
• Never operate this unit when it’s cover is removed
• To reduce the risk of electrical shock or re, do not expose this
unit rain or moisture
• Do not attempt to operate this unit if the power cord has been fray-
ed or broken. Do not attempt to remove or break o the ground
prong from the electrical cord. This prong is used to reduce the
risk of electrical shock and re in case of an internal short
• Disconnect from main power before making any type of connection
• Never block the ventilation holes. Always be sure to mount this
unit in an area that will allow proper ventilation. Allow about 6”
(15cm) between this device and a wall
• This unit is intended for indoor use only, use of this product out-
doors voids all warranties
• Always mount this unit in a safe and stable matter
• Please route your power cord out of the way of foot trac. Power
cords should be routed so they are not likely to be walked on,
pinched by items placed upon or against them
• The unit should only be serviced by qualified service personnel
when:
A. The power-supply cord or the plug has been damaged.
B. Objects have fallen, or liquid has been spilled into the unit.
C. The unit has been exposed to rain or water.
D. The appliance does not appear to operate normally or
exhibits a marked change in performance.
VF Flurry Safety Precautions
ADJ Products, LLC - VF Flurry Instruction Manual Page 2 ADJ Products, LLC - VF Flurry Instruction Manual Page 3
Introduction: Congratulations, you have just purchased the VF Flurry
snow machine. The VF Flurry snow machine has been designed to
perform reliably for years when the guidelines in this booklet are fol-
lowed. Please read and understand the instructions in this manual
carefully and thoroughly before attempting to operate this unit. These
instructions contain important information regarding safety during use
and maintenance.
Customer Support: ADJ Products, LLC provides a toll free cus-
tomer support line, to provide set up help and to answer any question
should you encounter problems during your set up or initial operation.
You may also visit us on the web at www.adj.com for any comments or
suggestions. For service related issue please contact ADJ Products,
LLC. Service Hours are Monday through Friday 8:00 a.m. to 4:30 p.m.
Pacic Standard Time.
Voice: (800) 322-6337
Fax: (323) 582-2941
E-mail: support@americandj.com
To purchase parts online visit http://parts.americandj.com
Warning! To prevent or reduce the risk of electrical shock or re, do
not expose this unit to rain or moisture.
Caution! There are no user serviceable parts inside this unit. Do not
attempt any repairs yourself, doing so will void your manufactures war-
ranty. In the unlikely event your unit may require service please contact
ADJ Products, LLC.
Do not discard the shipping cartoon in the trash. Please recycle when
ever possible.
VF Flurry Introduction
Please Note: Specications and improvements in the design of
this unit and this manual are subject to change without any prior
written notice.
ADJ Products, LLC - VF Flurry Instruction Manual Page 4 ADJ Products, LLC - VF Flurry Instruction Manual Page 5
GROUNDING INSTRUCTIONS
This product must be grounded. In the event of an electrical short circuit,
grounding reduces the risk of electric shock by providing an escape wire for
the electric current. This product is equipped with a cord having a ground-
ing wire with an appropriate grounding plug. The plug must be plugged into
an outlet that is properly installed and grounded in accordance with all local
codes and ordinances.
WARNING – Improper installation of the grounding plug is able to result
in a risk of electric shock. When repair or replacement of the cord or plug
is required, do not connect the grounding wire to either at blade terminal.
The wire with insulation having an outer surface that is green with or without
yellow stripes is the grounding wire.
Check with a qualied electrician or serviceman when the grounding instruc-
tions are not completely understood, or when in doubt as to whether the prod-
uct is properly grounded. Do not modify the plug provided; if it does not t
the outlet, have the proper outlet installed by a qualied electrician.
This product is for use on a nominal 120-V circuit and has a grounding plug
similar to the plug illustrated in sketch A. Only connect the product to an
outlet having the same conguration as the plug. Do not use an adapter with
this product.
VF Flurry Safety Precautions
Extension Cords:
Use only a 3-wire extension cord that has a 3-blade grounding plug, and a
3-slot receptacle that accepts the plug on the product. Make sure your exten-
sion cord is not damaged. When using an extension cord, be sure to use one
heavy enough to carry the current your product draws. For lengths less than
___ ft, ___ AWG extension cords shall be used. An undersized cord results
in a drop in line voltage and loss of power and overheating. (Below table
shows the correct size to use depending on cord length and nameplate ampere
rating. When in doubt, use the next heavier gauge. The smaller the gauge
number, the heavier the cord.)
VF Flurry Safety Precautions
Ampere
Rating
Range
Voltage Length of Cord in ft.
120V 25ft 50ft 100ft 150ft
240V 50ft 100ft 200ft 300ft
5-6 18 16 14 12
6-8 18 16 12 10
8- 10 18 14 12 10
- 8 10 12 16 14 10
- 8 12 14 16 12 10
- 8 14 16 16 12 10
Ampere
Rating
Range
Voltage
Length of Cord in ft.
120V 200ft 250ft 300ft 400ft 500ft
240V 400ft 500ft 600ft 800ft 1000ft
5-6 8 8 6 10 10
6-8 8 6 6 6 10
8- 8 8 6 6 4 10
- 8 6 6 4 4 10 12
- 6 6 6 4 2 12 14
- 6 6 4 4 2 14 16
Specyfikacje produktu
| Marka: | American DJ |
| Kategoria: | maszyna oddziaływania |
| Model: | VF Flurry |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z American DJ VF Flurry, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje maszyna oddziaływania American DJ
20 Maja 2024
Instrukcje maszyna oddziaływania
- maszyna oddziaływania BeamZ
- maszyna oddziaływania Behringer
- maszyna oddziaływania Chauvet
- maszyna oddziaływania Eurolite
- maszyna oddziaływania HQ Power
- maszyna oddziaływania Stairville
- maszyna oddziaływania Midas
Najnowsze instrukcje dla maszyna oddziaływania
29 Czerwca 2024
29 Czerwca 2024
3 Czerwca 2024
3 Czerwca 2024
3 Czerwca 2024
3 Czerwca 2024
3 Czerwca 2024
3 Czerwca 2024
3 Czerwca 2024
3 Czerwca 2024