Instrukcja obsługi Akyga AK-B1-500E

Akyga Ładowarka do urządzenia mobilnego AK-B1-500E

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Akyga AK-B1-500E (3 stron) w kategorii Ładowarka do urządzenia mobilnego. Ta instrukcja była pomocna dla 12 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/3
Basic Series - user manual
www.akyga.com
Short description of the product
The product is compatible with the applicable national and European requirements.
S explanation:ymbols
There is a risk of losing health or life (e.g. by electic shock).
There is a particular danger connected with service.
Important tips and information.
Product accordance with the EU directive 2002/96/EC. The symbol of the crossed out basket
placed on the product means that the marked product can not be disposed of with other
household waste. After use, the product must be return to collection point for used electical and
electronic equipment or to the seller. Appropriate segregation of rubbish for subsequent
processing, recovery or descrution contributes to avoiding negative effects on the environment
and health, and also allows the recovery of raw materials from which the product is made.
p. 1
The CE standard description on the product is the manufacturer's declaration that the marked
product meets the requirements of the directive so-called The "New Approach" of the European
Union (EU). For security and certification (CE) reasons, the device can not be rebuild or change
in any way. In the reason of using the power supply for other purposes than those described,
the product may be demaged. The incorrect use may also cause hazard such as short-circuits,
burns, electric shocks, etc. Read the users manual carefully and keep it for later use. The product
could be share to third partie only with the user manual included.
The BASIC series is a dedicated line of power supplies for the configuration of standard desktop
computers whose current requirements are adequate to the parameters given on the nameplate.
The product is adapted to supply voltage in the range of 230 V.
The power consumption of powering components can not exceed the power supply nominal current.
ATX power supplies
The RoHS mark on the product is the manufacturer's declaration that the marked product meets
the requirements of the EU Restriction of Hazardous Substances (2002/95/EC) directive, which
aims to reduce the amount of hazardous substances penetrating into the environment from
electrical and electronic waste.
EC
BOX
EN 61000-3-12
PFC
The II protection class device. It provides protection against electric shock against direct and
indirect contact, and thanks to the additional isolation it is not necessary to connect the device
case with the protective earth conductor.
The device is intended only for domestic use, indoors.
ATX power supplies - user manual
p. 2
Safety Precautions
The assembly should be carried out by persons with appropriate technical knowledge of PC
construction.
Connecting components whose demanded power is greather than power of the power supply, can
cause battery failure or even damage (burn) of power supply.
An electrostatic discharge occurs when two object touch each other, for example, an electric
charge that occurs when user touch metal door handle after walking on a carpet . Discharging
electrostatic charges from fingers or other electrostatic conductors can damage electronic
components. To avoid damaging the computer, abstain from touching electrical outlets, wires and
electonic circuits. The user’s contact with electronic components should be kept to a minimum.
The manufacturer of the product is not responsible for damage or insults caused in effect
of disobey the safety instructions and informations contained in these user manual.
źKeep the product and the packaging out of range of children and animals. The package
includes a foil that child could choke while playing.
źIt is forbidden to apply the mechanical load to the product - strong shocks, impacts, dropping or
crushing may cause its damage.
źThe product operation in adverse conditions is not allowed. Adverse conditions are primarily:
exposure to direct sunlight, high or very low ambient temperatures, strong vibrations, high
humidity, surrounds of gases, dusts or flammable and aggressive liquids.
źIf the product has been damaged, does not work properly or has been stored for a long period
of time in bad or unfavorable conditions, safe operation of the device is not possible. It is
essential to stop using the product and to protect it against re-use for security purposes.
źProduct and power cord should not be touched with moist or wet hands under no
circumstances.
źShort-circuiting the current connection is prohibited.
źMake sure that the power cord is not crushed, bent, twisted, rubbed against sharp edges or
mechanically loaded in any other way. Avoid thermal load of the cable - in particular keep away
from heat sources (such as stoves, radiators, fireplaces).
źPower cords should be laid in such a way as to eliminate the risk of stumbling or hooking over.
źIts forbidden to modify the power cord. In the case of modifications, the cable may be
damaged, causing threats to life, health and property.
źBefore connecting the adapter to the mains socket, make sure that the voltage specified on the
power supply matches voltage supplied to the household socket.
źMains plug should be disconnect from power socket if the product is not in use for a long time.
źWhen disconnecting the power cord from the socket and from the device, do not pull on the
cord, but only on the part of the cable plug provided for this purpose.
źIn case of any doubts regarding operation, safety or connection of the product, please contact
the manufacturer or a qualified specialist for this purpose.
źAll maintenance, adjustment and repair work on the product may only be carried out by a
qualified person in a specialist facility.
Basic Series
- user manual ATX power supplies
p. 3
Basic Series
Power Supply Instalation Guide
In case of replacement of an old unit:
ź,
ź,
ź,
ź.
:
ź,
ź,
ź,
ź,
ź,
ź.
Disconnect all power plugs from the computer
Remove the computer housing
Disconnect all power connectors of the old PSU
Unscrew 4 screws holding the old PSU on the back of the computer
Installation of new Power Supply
Screw new power supply to the case using 4 screws
Connect power connectors of a new PSU to suitable devices inside of the computer
Please remember that power connectors are intended for assembly in one particular way if there
are problems with connection of plug and connector then reverse it and try again,
Make sure that there are no loose screws left inside the computer
Put on and tighten the computer case
Connect the power cord plug to an electrical outlet
Cleaning the power supply
źUse compressed air .
źDo not use abrasive or chemical cleaners.
for cleaning the power supply
Disconect the power supply from the electrical socket and connected devices before cleaning.
Product manufacturer: Ropla Computers sp. z o.o.
ul. Wrocławska 1c
52-200 Suchy Dwór

Specyfikacje produktu

Marka: Akyga
Kategoria: Ładowarka do urządzenia mobilnego
Model: AK-B1-500E

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Akyga AK-B1-500E, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Ładowarka do urządzenia mobilnego Akyga

Akyga

Akyga AK-B1-700 Instrukcja

24 Września 2024
Akyga

Akyga AK-I1-200 Instrukcja

24 Września 2024
Akyga

Akyga AK-B1-500E Instrukcja

24 Września 2024

Instrukcje Ładowarka do urządzenia mobilnego

Najnowsze instrukcje dla Ładowarka do urządzenia mobilnego

Tripp Lite

Tripp Lite CSC32USBW Instrukcja

15 Stycznia 2025
Mophie

Mophie speedport 120 Instrukcja

13 Stycznia 2025
Kogan

Kogan KACHG120PDA Instrukcja

7 Stycznia 2025
Ansmann

Ansmann HC130PD mini Instrukcja

5 Stycznia 2025
Ikea

Ikea NORDMÄRKE 104.916.58 Instrukcja

5 Stycznia 2025
Ikea

Ikea LIVBOJ 004.574.95 Instrukcja

5 Stycznia 2025
Ikea

Ikea NORDMÄRKE 604.780.65 Instrukcja

5 Stycznia 2025
Ikea

Ikea NORDMÄRKE 204.900.12 Instrukcja

5 Stycznia 2025
Ikea

Ikea LIVBOJ 404.470.51 Instrukcja

5 Stycznia 2025
Ikea

Ikea SJÖMÄRKE 705.163.97 Instrukcja

5 Stycznia 2025