Instrukcja obsługi AFX Scott SCTB5054L30ENDG
AFX
Verlichting
Scott SCTB5054L30ENDG
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla AFX Scott SCTB5054L30ENDG (2 stron) w kategorii Verlichting. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/2
LED Indoor Luminaires Model # SCTB3840L30ENDG
Overbed Wall Mount SCTB5054L30ENDG
120VAC / 60Hz
Page 1 of 1 8061260 R1
Limited Factory Warranty
AFX Inc. hereby warranty that this xture is free from defects in materials and workmanship when installed and used under normal operating conditions for a period of 5 years
from date of shipment from factory. This warranty covers all component parts and extends only to replacement of defective xture or components; it does not cover failure due
to improper installation, misuse, mishandling or damage incurred in transit.
Safety Precautions
Read all safety precautions and installation instructions carefully before installing or servicing this xture. Failure to comply with these instructions could result in potentially fatal
electric shock and/or property damage.
It is recommended that a qualied electrician perform all wiring. This xture must be wired in accordance with all national and local electrical codes.
Do not handle any energized xture or attempt to energize any xture with wet hands or while standing on a wet or damp surface or in water.
This xture is designed for use in a 120VAC, 60Hz fused circuit. This xture is not compatible with dimmers.
Make sure that the power source conforms to the requirements of the xture. (See labels on the xture housing).
To reduce the risk of electrical shock, and to assure proper operation, this xture must be adequately grounded. To accomplish proper grounding, there must be a separate ground
wire (green) contact between this xture and the ground connection of your main power supply panel.
This xture is intended to be used for general indoor lighting in dry or damp locations.
Disclaimer
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been
tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules and Canadian IC -005 (B) / NMB-005 (B). These limits are designed to ES
provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged
to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiver antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult with the dealer or an experienced radio/TV technician for help.
Any modications to this xture may void the warranty and interfere with the safe operation of the luminaire.
Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may
cause undesired operation of the device.
Assembly Instructions
Step 1 Preparing for installation–
A. before installing or servicing any part of Disconnect electrical power
this xture.
B. Remove xture from carton; remove components from hardware kit.
C. Place the diuser assembly (9), channel cover (7) and hardware o to the
side.
D. Remove appropriate knockout(s) on channel assembly (1) for power
supply entry.
E. Install white cover plate (4) to junction box (not included) with two screws
(5).
F. Position the channel assembly (1) onto the wall with the “this side up”
sticker facing the proper direction and mark all appropriate mounting
locations. Take the channel assembly (1) down and punch a small hole in
the wall at each of the marked locations using a nail to see if there is a
wall stud to mount the xture to. Where there is a wall stud, use a suitable
screws (2, not included) to mount the xture. Where there is no stud to
screw into, a toggle bolt or drywall anchor (3, not included) must be used
to mount the channel assembly securely to the wall.
Wiring A–ll wiring must take place inside junction box (not included).
Caution: Make sure power is o at fuse or circuit breaker box. Check
power wires for damage or scrapes. If the power supply wires are within
three inches of the driver, use a wire suitable for at least 90C (194F). Most dwellings Note:
built before 1985 have supply wire rated to 60C. Consult a qualied electrician to ensure
correct branch circuit conductor before installing.
Step 2 ring –Wi
A. Make all wire connections to appropriate wire. Secure with wire nuts (provided).
B. Connect the green wire from the xture to the supply power source ground wire.
C. Connect black wire from the xture to the black (L) wire from supply power source.
D. Connect white wire from the xture to the white (N) wire from supply power source.
E. . Pull on each wire lead to make sure connections are secure. Make certain no bare wires are exposed outside of wire connectors. Tuck all Do not mix wires
connections neatly into junction box.
Step 3 Channel cover–
A. Install channel cover assembly (7) facing the correct direction (see “this side up” sticker), connect quick disconnect (6) coming out of the divider/LED
assembly with the leads that are coming out of the channel assembly. Make certain the uplight and downlight connectors are paired correctly as these are
controlled by the 4-way pull switch Align two front hole to the channel then secure with two screws (8). .
Step 4 Mounting diuser–
A. Install the diuser (9) by aligning two side holes to channel and secure with two screws ( (1) 10).
Step 5 Pull switches operation–
A. The far right pull switch operates the uplight and downlight by pulling on the chain once to turn on the uplight, pull twice to turn on the downlight, third pull to
turn on both uplight and downlight, and forth pull to turn both lights o. The left pull switch operates the night light by single pull to turn night light on and pull
twice to turn o.
Step 6 Power to the xture can now be restored–
3ft version shown for
reference only. Individual
models may vary.
Specyfikacje produktu
Marka: | AFX |
Kategoria: | Verlichting |
Model: | Scott SCTB5054L30ENDG |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z AFX Scott SCTB5054L30ENDG, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Verlichting AFX
9 Października 2024
9 Października 2024
9 Października 2024
9 Października 2024
9 Października 2024
9 Października 2024
9 Października 2024
9 Października 2024
9 Października 2024
9 Października 2024
Instrukcje Verlichting
- Verlichting Ikea
- Verlichting Tesy
- Verlichting LG
- Verlichting BeamZ
- Verlichting TP-Link
- Verlichting Milwaukee
- Verlichting Philips
- Verlichting Toolcraft
- Verlichting Conceptronic
- Verlichting Theben
- Verlichting Mio
- Verlichting Behringer
- Verlichting Nedis
- Verlichting Be Cool
- Verlichting American DJ
- Verlichting OK
- Verlichting Toshiba
- Verlichting Fenix
- Verlichting Hazet
- Verlichting Ardes
- Verlichting Gardena
- Verlichting DeWalt
- Verlichting Sigma
- Verlichting Honeywell
- Verlichting Chauvet
- Verlichting Steinel
- Verlichting Makita
- Verlichting Dyson
- Verlichting Vintec
- Verlichting RYOBI
- Verlichting Godox
- Verlichting Chamberlain
- Verlichting Trust
- Verlichting IFM
- Verlichting Biltema
- Verlichting V-TAC
- Verlichting Schneider
- Verlichting Eurolite
- Verlichting Emos
- Verlichting Crivit
- Verlichting Osram
- Verlichting Perel
- Verlichting Ansmann
- Verlichting DiO
- Verlichting Velleman
- Verlichting Delta Dore
- Verlichting Nordlux
- Verlichting Monster
- Verlichting Showtec
- Verlichting Lenoxx
- Verlichting EtiamPro
- Verlichting Ibiza Sound
- Verlichting ION
- Verlichting Maginon
- Verlichting Brilliant
- Verlichting Brandson
- Verlichting Rocktrail
- Verlichting Novy
- Verlichting Innoliving
- Verlichting Omnitronic
- Verlichting Livarno Lux
- Verlichting Elro
- Verlichting Hama
- Verlichting Busch + Müller
- Verlichting Cameo
- Verlichting Goobay
- Verlichting COLBOR
- Verlichting Elation
- Verlichting GVM
- Verlichting Infinity
- Verlichting Denver
- Verlichting Blumfeldt
- Verlichting Intellytech
- Verlichting Nitecore
- Verlichting SereneLife
- Verlichting Olight
- Verlichting Black Diamond
- Verlichting Martin
- Verlichting Vivanco
- Verlichting PowerPlus
- Verlichting HiKOKI
- Verlichting Workzone
- Verlichting Ikan
- Verlichting Kathrein
- Verlichting Impact
- Verlichting Monacor
- Verlichting Aputure
- Verlichting HQ Power
- Verlichting Dörr
- Verlichting Karma
- Verlichting Smartwares
- Verlichting Magmatic
- Verlichting Metabo
- Verlichting Adj
- Verlichting Varaluz
- Verlichting ETC
- Verlichting Cotech
- Verlichting Gre
- Verlichting Stairville
- Verlichting XQ-lite
- Verlichting Perfect Christmans
- Verlichting Profoto
- Verlichting Rosco
- Verlichting Light4Me
- Verlichting Reflecta
- Verlichting Qazqa
- Verlichting Tel Sell
- Verlichting Brennenstuhl
- Verlichting KonstSmide
- Verlichting LivarnoLux
- Verlichting Tiger
- Verlichting Eglo
- Verlichting Lucide
- Verlichting Caliber
- Verlichting Kichler
- Verlichting Sun Joe
- Verlichting GLP
- Verlichting Megaman
- Verlichting GlobalTronics
- Verlichting Steren
- Verlichting Livarno
- Verlichting Watshome
- Verlichting Melinera
- Verlichting In Lite
- Verlichting Maul
- Verlichting Näve
- Verlichting Chacon
- Verlichting Astro
- Verlichting Bigben
- Verlichting Massive
- Verlichting Yongnuo
- Verlichting Gamma
- Verlichting Lexon
- Verlichting Steinhauer
- Verlichting QTX
- Verlichting HQ
- Verlichting Max
- Verlichting Nanlite
- Verlichting Ranex
- Verlichting Paul Neuhaus
- Verlichting REV
- Verlichting Dymond
- Verlichting Friedland
- Verlichting Nexxt
- Verlichting Neewer
- Verlichting Artecta
- Verlichting Litepanels
- Verlichting Litecraft
- Verlichting Garden Lights
- Verlichting Manfrotto
- Verlichting Shada
- Verlichting Swisstone
- Verlichting KS
- Verlichting Dydell
- Verlichting Aqara
- Verlichting Botex
- Verlichting Levita
- Verlichting Paulmann
- Verlichting Heirt
- Verlichting Kogan
- Verlichting LYYT
- Verlichting Wetelux
- Verlichting Aqua Signal
- Verlichting Century
- Verlichting Esotec
- Verlichting Lideka
- Verlichting Obsidian
- Verlichting Lutec
- Verlichting FlinQ
- Verlichting IXL
- Verlichting Fun Generation
- Verlichting Meipos
- Verlichting Beghelli
- Verlichting EXO
- Verlichting Mellert SLT
- Verlichting 4K5
- Verlichting Wireless Solution
- Verlichting LightZone
- Verlichting Varytec
- Verlichting Canarm
- Verlichting GP
- Verlichting Luxform
- Verlichting Karwei
- Verlichting Blumill
- Verlichting Delock Lighting
- Verlichting LightPro
- Verlichting CIVILIGHT
- Verlichting Gingko
- Verlichting Outspot
- Verlichting Raya
- Verlichting Chrome-Q
- Verlichting Maxim
- Verlichting Megatron
- Verlichting MeLiTec
- Verlichting Integral LED
- Verlichting Casalux
- Verlichting Briloner
- Verlichting Dainolite
- Verlichting GEV
- Verlichting Kinotehnik
- Verlichting Litegear
- Verlichting HERA
- Verlichting Astera
- Verlichting Temde
- Verlichting Aveo Engineering
- Verlichting AD Trend
- Verlichting Prolycht
- Verlichting DeSisti
- Verlichting Cineo
- Verlichting Zylight
- Verlichting Smith-Victor
- Verlichting Light & Motion
- Verlichting ET2
- Verlichting Quoizel
- Verlichting Golden Lighting
- Verlichting Weeylite
- Verlichting Crystorama
- Verlichting Valerie Objects
Najnowsze instrukcje dla Verlichting
9 Października 2024
9 Października 2024
9 Października 2024
9 Października 2024
9 Października 2024
9 Października 2024
9 Października 2024
9 Października 2024
9 Października 2024
9 Października 2024