Instrukcja obsługi AEG SPE 80 A

AEG Maszyna do piłowania SPE 80 A

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla AEG SPE 80 A (62 stron) w kategorii Maszyna do piłowania. Ta instrukcja była pomocna dla 12 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/62
GB
D
F
I
E
P
NL
DK
S
FIN
ST 400
ST 440
STEP 420
STEP 450
SPE 70
SPE 80 A
Instructions for use
Please read and save these
instructions.
Gebrauchsanleitung
Bitte lesen und aufbewahren.
Instruction d’utilisation
Prière de lire et de conserver.
Istruzioni d’uso
Si prega di leggere le istruzioni e
di conservarle.
Instrucciones de uso
Lea y conserve estas
instrucciones por favor.
Instruções de serviço
Por favor leia e conserve em seu
poder.
Gebruiksaanwijzing
Lees en let goed op deze
adviezen.
Brugsanvisning
Vær venlight at læse og
opbevare.
Bruksanvisning
Var god läs och tag tillvara dessa
instruktioner.
Käyttöohje
Lue ja säilytö
15
0
B
A
III
II
I
0
1
ENGLISH ST 400, ST 440, STEP 420, STEP 450, SPE 70, SPE 80 A
You have high standards and expect to purchase quality goods – quality offered by
Atlas Copco. We have built a durable and reliable electric power tool for you.
Please read the instructions for use before first operation so you can handle your
power tool effectively and safely.
We are sure that buying an AEG Electric Power Tool from Atlas Copco was the
right choice!
ST 400 ST 440 STEP 420
Cutting depth max. in:
Soft– wood 60 mm 60 mm 65 mm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Hard wood 50 mm 50 mm 55 mm–. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Steel 3 mm 3 mm 5 mm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Aluminium 10 mm 10 mm 10 mm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Nominal power 400 W 440 W 420 W. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Weight 1,6 kg 1,6 kg 1,7 kg. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Stroke rate under no-load 3000 min
-1 3000 min-1 450-3000 min-1
. . . . . . . . . .
Lengths of stroke 19 mm 19 mm 19 mm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Bevel cuts up to 45o45o45o
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
STEP 450 SPE 70 SPE 80 A
Cutting depth max. in:
Soft– wood 65 mm 70 mm 70 mm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Hard wood 55 mm 60 mm 60 mm–. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Steel 5 mm 5 mm 5 mm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Aluminium 10 mm 10 mm 10 mm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Nominal power 450 W 500 W 500 W. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Weight 1,7 kg 1,7 kg 1,7 kg. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Stroke rate under no-load 450-3000 min
-1 450-3000 min-1 450-3000 min-1
. .
Lengths of stroke 19 mm 19 mm 19 mm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Bevel cuts up to 45o45o45o
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
J Please pay attention to the safety instructions in the attached leaflet!
J Dust that arises when working on material containing asbestos or stonework
containing crystalline silicic acid is harmful to the health. Please follow accident
prevention regulations.
J Appliances used at many different locations including open air must be connected
via a current surge preventing switch.
J Always use the protective shields on the machine.
J Always disconnect the plug from the socket before carrying out any work on the
machine.
J Always wear goggles when using the machine. It is recommended to wear gloves,
sturdy non slipping shoes and apron.
J Sawdust and splinters must not be removed while the machine is running.
J Do not pierce the motor housing as this could damage the double insulation (use
adhesives).
J Keep mains lead clear from working range of the machine. Always lead the cable
away behind you.
J Only plug-in when machine is switched off.
J Dust that arises when working on wood or using the tool on industrial material can be
dangerous to health. In this case connect the tool to a suitable suction device.
J Do not use cracked or distorted saw blades.
Typically the A-weighted sound pressure level of the tool is 82 dB (A).The noise
level when working can exceed 85 dB (A). Wear ear protectors!
Measured values determined according to EN 50 144.
Typically the weighted acceleration is 3 m/s
2.
Measured values determined according to EN 50 144.
This jig saw can cut wood, plastic and metal; it can cut straight lines, bevels, curves,
and internal cut-outs.
Do not use this product in another way as stated for normal use.
Introduction
Technical Data
Advice for your
safety
Measured sound
value
Measured
vibration value
Use
2
ENGLISH ST 400, ST 440, STEP 420, STEP 450, SPE 70, SPE 80 A
Connect only to a single-phase AC current supply and only to the mains voltage
specified on the rating plate. Connection to sockets without earth protection is
possible as the appliance features protective insulation to DIN 57 740/ VDE 0740
and CEE 20. Radio suppression complies with the European standard EN 55014.
When fitting the plug, make sure that the brown (live) wire of this appliance is
connected to the plug terminal marked L or coloured red, and the blue (neutral) wire
of this appliance is connected to the plug terminal marked N or coloured black.
Under no circumstances must the wires of this appliance be connected to the earth
terminal of the plug marked either E, with the earth symbol or coloured green or
green/yellow.
Mains
connection
Brief description
15
0
B
A
III
II
I
0
Modifications: Text, diagrams and data are correct at the time of printing.
In the interest of continuous improvement of our products, technical
specifications are subject to alteration without prior notice.
The on-off switch can be fixed in the
” ”On - position for continuous operation
by means of the locking button.
The on-off switch is shaped in such a way that it can be
used from the forward or the rear holding position.
The sawdust blower removes sawdust
ahead of the cut – very practical when
sawing along a line.
Integrated suction channel for
connection to a
vacuum-cleaner.
The vibration damper permits quieter
running by means of a counterweight on the
plunger.
Transparent cover for
optimum sawdust
removal.
The stroke-rate (= movements per
minute of the saw blade) can be infinitely
varied by means of the adjustment
wheel.(not for ST 400, ST 440)
The anti-splintering device
almost entirely prevents the
edge of the wood from
splintering. (Accessory*)
The base plate can be tilted to both sides
by 45o for bevel cuts.
Integrated tool storage for spare
blade.
The built-in pendulum stroke improves the cutting
performance. The pendulum stroke of the saw blade
means it is only pressed against the material on the
reverse stroke (working stroke) and lifted off the
material on the forward stroke.
Result: better extraction of sawdust, lower friction
–> higher cutting performance.
The pendulum stroke can be adjusted by the
pendulum stroke control and thus adapted to different
kinds of material. (not for ST 400, ST 440)

Specyfikacje produktu

Marka: AEG
Kategoria: Maszyna do piłowania
Model: SPE 80 A

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z AEG SPE 80 A, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Maszyna do piłowania AEG

AEG

AEG BUS 18C2 Instrukcja

2 Października 2024
AEG

AEG STEP 900 X Instrukcja

16 Września 2024
AEG

AEG ACS18B30 Instrukcja

15 Września 2024
AEG

AEG STEP 570 X Instrukcja

14 Września 2024
AEG

AEG A18CHS14 Instrukcja

14 Września 2024
AEG

AEG STEP 450 Instrukcja

29 Sierpnia 2024
AEG

AEG 800 XE Instrukcja

9 Sierpnia 2024
AEG

AEG PS 254 L Instrukcja

8 Sierpnia 2024
AEG

AEG PS 216 L Instrukcja

4 Lipca 2024
AEG

AEG KS 66-2 Instrukcja

4 Lipca 2024

Instrukcje Maszyna do piłowania

Najnowsze instrukcje dla Maszyna do piłowania

Makita

Makita 5603 Instrukcja

15 Października 2024
MSW

MSW -TAS287 Instrukcja

15 Października 2024
MSW

MSW T-SAW300 Instrukcja

15 Października 2024
Black & Decker

Black & Decker KS650 Instrukcja

14 Października 2024
Black & Decker

Black & Decker GKC3630L20 Instrukcja

14 Października 2024
Ferm

Ferm FKS-165 Instrukcja

14 Października 2024
Royal Catering

Royal Catering RCBS-1650 Instrukcja

14 Października 2024
Royal Catering

Royal Catering RCBS-1650.1ECO Instrukcja

14 Października 2024
Husqvarna

Husqvarna 365H Instrukcja

13 Października 2024
Makita

Makita DJV181Z Instrukcja

12 Października 2024