Instrukcja obsługi AEG STEP 570 X

AEG Maszyna do piłowania STEP 570 X

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla AEG STEP 570 X (64 stron) w kategorii Maszyna do piłowania. Ta instrukcja była pomocna dla 6 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/64
GB
D
F
I
E
P
NL
DK
S
FIN
TR
RUS
STEP 570 X
STEP 600 X
Instructions for use
Please read and save these
instructions.
Gebrauchsanleitung
Bitte lesen und aufbewahren.
Instruction d’utilisation
Prière de lire et de conserver.
Istruzioni d’uso
Si prega di leggere le istruzioni e
di conservarle.
Instrucciones de uso
Lea y conserve estas
instrucciones por favor.
Instruções de serviço
Por favor leia e conserve em seu
poder.
Gebruiksaanwijzing
Lees en let goed op deze
adviezen.
Brugsanvisning
Vær venlight at læse og
opbevare.
Bruksanvisning
Var god läs och tag tillvara dessa
instruktioner.
Käyttöohje
Lue ja säilytö
Kullanøm kølavuzu
Lütfen okuyun ve saklayin
Èíñòðóêöèÿ ïî
èñïîëüçîâàíèþ
Ïîæàëóéñòà, ïðî÷òèòå è
ñîõðàíèòå íàñòîÿùóþ
èíñòðóêöèþ
15
0
B
A
III
II
I
0
1
ENGLISH STEP 570 X, STEP 600 X
You are demanding and expect to purchase quality goods – quality offered by Atlas
Copco. We have built a durable and reliable electric power tool for you.
Please read the instructions for use before first operation so you can handle your
power tool effectively and safely. We are sure that buying an AEG Electric Power
Tool from Atlas Copco was the right choice!
STEP 570 X STEP 600 X
Cutting depth max. in:
Soft– wood 95 mm 110 mm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Hard wood 65 mm 70 mm–. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Steel 8 mm 8 mm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Aluminium 10 mm 15 mm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Nominal power 570 W 600 W. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Stroke rate under no-load 450–3000 min
-1 450 3000 min–-1
. . . . . . . .
Lengths of stroke 19 mm 19 mm. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Bevel cuts up to 45o45o
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Weight 2,1 kg 2,1 kg. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
JPlease pay attention to the safety instructions in the attached leaflet!
JDust that arises when working on material containing asbestos or stonework
containing crystalline silicic acid is harmful to the health. Please follow accident
prevention regulations.
JAppliances used at many different locations including open air must be connected
via a current surge preventing switch.
JAlways use the protective shields on the machine.
JAlways disconnect the plug from the socket before carrying out any work on the
machine.
JAlways wear goggles when using the machine. It is recommended to wear gloves,
sturdy non slipping shoes and apron.
JSawdust and splinters must not be removed while the machine is running.
JDo not pierce the motor housing as this could damage the double insulation (use
adhesives).
JKeep mains lead clear from working range of the machine. Always lead the cable
away behind you.
JOnly plug-in when machine is switched off.
JDust that arises when working on wood or using the tool on industrial material can be
dangerous to health. In this case connect the tool to a suitable suction device.
JDo not use cracked or distorted saw blades.
Typically the A-weighted sound pressure level of the tool is 82 dB (A).The noise
level when working can exceed 85 dB (A). Wear ear protectors! Measured values
determined according to EN 50 144.
Typically the weighted acceleration is 4 m/s
2.
Measured values determined according to EN 50 144.
This jig saw can cut wood, plastic and metal; it can cut straight lines, bevels, curves,
and internal cut-outs.
Do not use this product in another way as stated for normal use.
Connect only to a single-phase AC current supply and only to the mains voltage
specified on the rating plate. Connection to sockets without earth protection is
possible as the appliance features protective insulation to DIN 57 740/ VDE 0740
and CEE 20. Radio suppression complies with the European standard EN 55014.
When fitting the plug, make sure that the brown (live) wire of this appliance is
connected to the plug terminal marked L or coloured red, and the blue (neutral) wire
of this appliance is connected to the plug terminal marked N or coloured black.
Under no circumstances must the wires of this appliance be connected to the earth
terminal of the plug marked either E, with the earth symbol or coloured green or
green/yellow.
Technical Data
Advice for your
safety
Measured sound
value
Measured
vibration value
Use
Mains
connection
2
ENGLISH STEP 570 X, STEP 600 X
Always disconnect the plug from the socket before carrying out any work on the
machine.
1. Push the tension lever as far as it will go,
as shown in the illustration.
2. Fit the saw blade into the groove in the
support roller and push it firmly into the
plunger as far as it will go; the lug of the
saw blade must be in the plunger (see
illustration).
3. Release the tension lever and the saw
blade is gripped automatically.
4. Check that the saw blade fits firmly (wear protective
gloves!); the slot in the plunger must always be at an
angle to the saw blade (see illustration below).
When fixing the saw blade it might be in a slightly
sloping position.
When first cutting it will adjust automatically.
Brief description
15
0
B
A
III
II
I
0
Modifications: Text, diagrams and data are
correct at the time of printing. In the interest of
continuous improvement of our products,
technical specifications are subject to alteration
without prior notice.
The on-off switch can be fixed in the
” ”On - position for continuous operation
by means of the locking button.
The on-off switch is shaped in such a way
that it can be used from the forward or the
rear holding position.
The built-in pendulum stroke improves the cutting performance.
The pendulum stroke of the saw blade means it is only pressed
against the material on the reverse stroke (working stroke) and
lifted off the material on the forward stroke.
Result: better extraction of sawdust, lower friction –> higher cutting
performance.
The pendulum stroke can be adjusted by the pendulum stroke
control and thus adapted to different kinds of material.
The sawdust blower removes sawdust ahead of
the cut – very practical when sawing along a line.
The anti-splintering device almost entirely
prevents the edge of the wood from
splintering.
Integrated suction channel
for connection to a
vacuum-cleaner.
The vibration damper permits quieter running by
means of a counterweight on the plunger.
Integrated tool storage for
spare blade.
The base plate can be tilted to both sides by 45
o
for bevel cuts.
The stroke-rate (= movements per minute of the saw
blade) can be infinitely varied by means of the
adjustment wheel.
The saw blade can be changed in seconds by
using the tension lever.
Transparent cover for optimum sawdust removal.
Inserting the
saw-blade
15
0
II
I
0

Specyfikacje produktu

Marka: AEG
Kategoria: Maszyna do piłowania
Model: STEP 570 X

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z AEG STEP 570 X, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Maszyna do piłowania AEG

AEG

AEG BUS 18C2 Instrukcja

2 Października 2024
AEG

AEG STEP 900 X Instrukcja

16 Września 2024
AEG

AEG ACS18B30 Instrukcja

15 Września 2024
AEG

AEG STEP 570 X Instrukcja

14 Września 2024
AEG

AEG A18CHS14 Instrukcja

14 Września 2024
AEG

AEG STEP 450 Instrukcja

29 Sierpnia 2024
AEG

AEG 800 XE Instrukcja

9 Sierpnia 2024
AEG

AEG PS 254 L Instrukcja

8 Sierpnia 2024
AEG

AEG PS 216 L Instrukcja

4 Lipca 2024
AEG

AEG KS 66-2 Instrukcja

4 Lipca 2024

Instrukcje Maszyna do piłowania

Najnowsze instrukcje dla Maszyna do piłowania

Makita

Makita 5603 Instrukcja

15 Października 2024
MSW

MSW -TAS287 Instrukcja

15 Października 2024
MSW

MSW T-SAW300 Instrukcja

15 Października 2024
Black & Decker

Black & Decker KS650 Instrukcja

14 Października 2024
Black & Decker

Black & Decker GKC3630L20 Instrukcja

14 Października 2024
Ferm

Ferm FKS-165 Instrukcja

14 Października 2024
Royal Catering

Royal Catering RCBS-1650 Instrukcja

14 Października 2024
Royal Catering

Royal Catering RCBS-1650.1ECO Instrukcja

14 Października 2024
Husqvarna

Husqvarna 365H Instrukcja

13 Października 2024
Makita

Makita DJV181Z Instrukcja

12 Października 2024