Instrukcja obsługi AEG PN 5000 E

AEG Wiertarki udarowe PN 5000 E

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla AEG PN 5000 E (55 stron) w kategorii Wiertarki udarowe. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/55
GB
D
F
I
E
P
NL
DK
S
FIN
TR
RUS
RC
PNEUMATIC 5000 E
Instructions for use
Please read and save these
instructions.
Gebrauchsanleitung
Bitte lesen und aufbewahren.
Instruction d’utilisation
Prière de lire et de conserver.
Istruzioni d’uso
Si prega di leggere le istruzioni e
di conservarle.
Instrucciones de uso
Lea y conserve estas
instrucciones por favor.
Instruções de serviço
Por favor leia e conserve em seu
poder.
Gebruiksaanwijzing
Lees en let goed op deze
adviezen.
Brugsanvisning
Vær venlig at læse og opbevare.
Bruksanvisning
Var god läs och tag tillvara dessa
instruktioner.
Käyttöohje
Lue ja säilytö
Kullanøm kølavuzu
Lütfen okuyun ve saklayin
Èíñòðóêöèÿ ïî
èñïîëüçîâàíèþ
Ïîæàëóéñòà, ïðî÷òèòå è
ñîõðàíèòå íàñòîÿùóþ
èíñòðóêöèþ
1
ENGLISH PNEUMATIC 5000 E
You have high standards and expect to purchase quality goods – quality offered by
Atlas Copco.
We have built a durable and reliable electric power tool for you.
Please read the instructions for use before first operation so you can handle your
power tool effectively and safely.
We are sure that buying an AEG Electric Power Tool from Atlas Copco was the right
choice!
Nominal power 1050 W. . . . . . . . . . . . . . . . . . . .
No-load speed 0–300 min-1
. . . . . . . . . . . . . . . . . . .
Speed under load max. 250 min-1
. . . . . . . . . . . . . .
Percussion rate 3200 min-1
. . . . . . . . . . . . . . . . . . .
Drilling capacity in
Concrete max. 50 mm. . . . . . . . . . . . . . . . . . . . .
concrete with core drill max. 150 mm. . . . . . . .
Weight 8,9 kg. . . . . . . . . . . . . . . . . . . . . . . . . . . .
JPlease pay attention to the safety instructions in the attached leaflet!
JDust that arises when working on material containing asbestos or stonework
containing crystalline silicic acid is harmful to the health. Please follow accident
prevention regulations.
JAppliances used at many different locations including open air must be connected
via a current surge preventing switch.
JAlways wear goggles when using the machine. It is recommended to wear gloves,
sturdy non slipping shoes and apron.
JSawdust and splinters must not be removed while the machine is running.
JDo not pierce the motor housing as this could damage the double insulation (use
adhesives).
JAlways disconnect the plug from the socket before carrying out any work on the
machine.
Only plug-in when machine is switched off.
JKeep mains lead clear from working range of the machine. Always lead the cable
away behind you.
JAlways use the auxiliary handle, even if the machine has a safety clutch since this
safety clutch only engages when the machine blocks with a jerk.
JWhen drilling in walls ceiling, or floor, take care to avoid electric cables and gas or
waterpipes.
Typically the A-weighted noise levels of the tool are:
Sound pressure level = 93 dB (A).
Sound power level = 106 dB (A).
Wear ear protectors!
Measured values determined according to EN 50 144.
Typically the weighted acceleration is : 5,0 m/s
2.
Measured values determined according to EN 50 144.
The pneumatic hammer can be universally used for hammer drilling and chiselling.
Do not use this product in another way as stated for normal use.
Connect only to a single-phase AC current supply and only to the mains voltage
specified on the rating plate. Connection to sockets without earth protection is
possible as the appliance features protective insulation to DIN 57 740/ VDE 0740
and CEE 20. Radio suppression complies with the European standard EN 55014.
When fitting the plug, make sure that the brown (live) wire of this appliance is
connected to the plug terminal marked L or coloured red, and the blue (neutral) wire
of this appliance is connected to the plug terminal marked N or coloured black.
Under no circumstances must the wires of this appliance be connected to the earth
terminal of the plug marked either E, with the earth symbol or coloured green or
green/yellow.
Introduction
Technical Data
Advice for your
safety
Measured sound
value
Measured
vibration value
Use
Mains
connection
2
ENGLISH PNEUMATIC 5000 E
The impact needed for hammer drilling in stone is created by a pneumatic hammer
striking mechanism. Similar to hitting a common chisel with a hammer, a plunger hits
the axially moving chisel. The electric motor moves the plunger back and forth crank
drive –> piston –> freely moving piston. There is a pneumatic cushion between
piston and freely moving piston (pneumatic hammer mechanism). This results in a
highly effective hammering action.
Exerting greater power does not increase the machine’s effectiveness.
Switching on: Press switch trigger
Switching off: Release switch trigger
The speed can be infinitely varied by
slowly releasing/pressing the switch
trigger.
Function of
rotary pneumatic
hammer
Brief description
Switching the
machine on and
off
Built-in safety clutch helps prevent
the machine from rotating if the drill bit
jams.
Ergonomically designed
housing with soft grip.
Anti Vibration System AVS
The hammer mechanism and motor are
independant of the handgrips, cushioning
elements absorb vibrations on both handgrips
when hammering and chiselling.
Selector lever for switching
between hammer drilling and
chiselling.
Auxiliary handle, has an
integral depth gauge and can
be rotated in various
positions.
Switch trigger for switching the machine on and off, and
for smooth starting and varying speed.
Reception for auxiliary handle at the side
of the machine. For drilling upward or
downward the auxiliary handle can be
fastened at the side of the machine.
Modifications: Text, diagrams and data are correct at the time of printing. In the interest of continuous
improvement of our products, technical specifications are subject to alteration without prior notice.
Hammer drilling chuck for
bits and accessories with
SDS-max reception tools–
are locked automatically after
insertion.

Specyfikacje produktu

Marka: AEG
Kategoria: Wiertarki udarowe
Model: PN 5000 E

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z AEG PN 5000 E, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Wiertarki udarowe AEG

AEG

AEG PN 2200 RX Instrukcja

8 Sierpnia 2024
AEG

AEG KH 24 IE Instrukcja

6 Lipca 2024
AEG

AEG PN 3500 X Instrukcja

5 Lipca 2024
AEG

AEG SB2E 850 RS Instrukcja

4 Lipca 2024
AEG

AEG PN 5000 E Instrukcja

2 Lipca 2024

Instrukcje Wiertarki udarowe

Najnowsze instrukcje dla Wiertarki udarowe

Black & Decker

Black & Decker KR700CRE Instrukcja

15 Października 2024
Milwaukee

Milwaukee 2416-20 Instrukcja

12 Października 2024
Makita

Makita HR4010C Instrukcja

11 Października 2024
Milwaukee

Milwaukee M12 CH Instrukcja

11 Października 2024
Makita

Makita HP1631K Instrukcja

10 Października 2024
Tryton

Tryton TMM10533 Instrukcja

10 Października 2024
Hitachi

Hitachi DH 26PX Instrukcja

9 Października 2024
Ferm

Ferm HDM1023 Instrukcja

9 Sierpnia 2024
Hitachi

Hitachi DH 18DL Instrukcja

9 Sierpnia 2024
Batavia

Batavia BT–PD001 Instrukcja

9 Sierpnia 2024