Instrukcja obsługi Adastra MM3260

Adastra system hi-fi MM3260

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Adastra MM3260 (6 stron) w kategorii system hi-fi. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/6
M M3260
1U Rackmount Mixer-Amp with Bluetooth®, USB & FM Tuner
Item ref: 9 953.02 UK
User Manual
Version 2.0
Caution: Please read this manual carefully before operating
Damage caused by misuse is not covered by the warranty
953. 9 User Manual 02 UK
Introduction
Thank you for choosing an Adastra M mixer-amp with built-in media player as part of your sound system. M3260
This unit is designed to offer high quality, dependable service for audio mixing and distribution .
Please read this manual to gain the best results from your product and avoid damage through misuse.
SAFETY SYMBOL AND MESSAGE CONVENTIONS
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
AVIS
RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR
This symbol indicates that dangerous voltage constituting a risk of electric shock is present within this
unit
This symbol indicates that there are important operating and maintenance instructions in the
literature accompanying this unit.
SAFETY NOTICE
1. Prior to use, read through this manual
2. Keep the manual in good condition
3. Pay attention to safety warnings
4. Observe all operating requirements
5. Do not use the device near water or wet areas
6. For cleaning, only use a lint-free, dry cloth
7. Install according to the specifications
8. Place away from heat sources or heating appliances
9. Use mains lead provided and avoid damage to cable or connectors
10. Unplug power from mains during stormy weather or if unused for long periods
11. In case of malfunction, water ingress or other damage, consult qualified service personnel
12. Do not place in damp areas or near liquids or moisture. Do not spill liquids on the housing
13. Please pay attention to warning symbols during transit and placement
14. Terminals marked with the symbol are HAZARDOUS LIVE and should only be connected by qualified personnel
15. Ensure that the apparatus is connected to a mains socket with a protective EARTH connection
16. Ensure correct operation of the mains switch
Warning
To prevent the risk of fire or electric shock, do not expose any components to rain or moisture.
If liquids are spilled on the casing, stop using immediately, allow unit to dry out and have checked by qualified personnel before further use. Avoid
impact, extreme pressure or heavy vibration to the case
No user serviceable parts inside Do not open the case refer all servicing to qualified service personnel. – –
Safety
• Check for correct mains voltage and condition of IEC lead before connecting to power outlet
Placement
• This unit can be used free-standing or fixed into a 19” rack
• Ensure adequate support and access to controls and connectors when rack-mounting
Cleaning
• Use a soft cloth with a neutral detergent to clean the housing as required
• Do not use strong solvents for cleaning the unit
953. 9 User Manual 02 UK
Front panel
Rear panel
Connection
Ensure the Power (15) is switched off until all input and output connections are in place.
Turn all rotary level controls ( - and Master level (13) fully down (anti-clockwise) to avoid loud noises 5 10)
when switching on.
Set the BASS and TREBLE Tone controls (11, 12) to the vertical position (zero)
Channels 1, 2 and 3 can accept microphones or mono line level inputs, such as CD, TV or electronic keyboard.
Connect the main microphone or line level signal to Mic/Line 1 input on the rear panel via balanced XLR (28)
or 6.3mm jack .
If a condenser mic is being used connect via XLR, select Mic level and 20V Phantom power on via the channel ,
1 DIP switches (27)
Further mic or line level signals can be connected to inputs 2 and (24, 26) in the same way as for channel 1 3
Set the DIP switches for channels 2 and 3 (23, 25) to suit the input source.
Connect stereo line level sources to AUX and AUX 2 RCA inputs (21, 22). 1
Loudspeakers should be connected to the MM3260 via Left & Right screw terminals on a removable modular
connector. Connect + and wires to each speaker as indicat , ensuring that there is no chance of strands –ed
shorting across terminals.
Important: Ensure that the load is no lower than 4 for each output. Ω
(e.g. 2 x 4Ω speakers… or… 2 Ω speakers wired in parallel) pairs of 8
Ensure that the speakers can handle W from each output. 60
1.
3.5mm AUX input to media play er
9.
Aux line input 1 level control
2.
USB port
10.
Aux line input 2 level control
3.
Media player control panel
11.
Bass EQ boost/cut control
4.
Media player LCD display
12.
Treble EQ boost/cut control
5.
Media player level control
13.
Master output level control
6.
Mic/Line input 1 level control
14.
Output level LED indicators
7.
Mic/Line input 2 level control
15.
Power switch and indicator
8.
Mic/Line input 3 level control
16.
IEC mains inlet and fuse holder
24.
Input 3 balanced XLR/jack
17.
L+R XLR balanced outputs
25.
Mic/Line and phantom switches Input 2
18.
L+R speaker output terminals
26.
Input 2 balanced XLR/jack
19.
24V emergency alarm contacts
27.
Mic/Line and phantom switches Input 1
20.
Record output L+R RCA
28.
Input 1 balanced XLR/jack
21.
Aux 2 line input L+R RCA
29.
CH.1 o ide level adjustment verr
22.
Aux 1 line input L+R RCA
30.
Bluetooth antenna connection
23.
Mic/Line and phantom switches Input 3
31.
FM tuner antenna F connector

Specyfikacje produktu

Marka: Adastra
Kategoria: system hi-fi
Model: MM3260

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Adastra MM3260, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje system hi-fi Adastra

Adastra

Adastra A14 Instrukcja

2 Października 2024
Adastra

Adastra A200 Instrukcja

25 Września 2024
Adastra

Adastra LA-600 mkII Instrukcja

15 Września 2024
Adastra

Adastra LA-300 mkII Instrukcja

11 Września 2024
Adastra

Adastra S460-WIFI Instrukcja

10 Września 2024
Adastra

Adastra MM3260 Instrukcja

6 Września 2024

Instrukcje system hi-fi

Najnowsze instrukcje dla system hi-fi

AKAI

AKAI EIE Pro Instrukcja

13 Października 2024
Sharp

Sharp XL-540H Instrukcja

11 Października 2024
Kenwood

Kenwood M-9000S Instrukcja

10 Października 2024
GoGen

GoGen MSC 472 BTDAB Instrukcja

9 Października 2024
Morel

Morel SUB-10X Instrukcja

9 Października 2024
Morel

Morel USUB 803 Instrukcja

9 Października 2024
Morel

Morel Soundsub PSW8e-w Instrukcja

9 Października 2024
Morel

Morel Sopran 934 Instrukcja

9 Października 2024
NAD

NAD M10 V3 Instrukcja

9 Października 2024
NUVO

NUVO NV-MPS4-E Instrukcja

8 Października 2024