Instrukcja obsługi Adastra LA-600 mkII

Adastra system hi-fi LA-600 mkII

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Adastra LA-600 mkII (8 stron) w kategorii system hi-fi. Ta instrukcja była pomocna dla 8 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/8
LA-SERIES
LOOP AMPLIFIERS
Item ref: 952.864UK, 952.867UK
User Manual
Version 1.1
Caution: Please read this manual carefully before operating
Damage caused by misuse is not covered by the warranty
952.864UK, 952.867UK User Manual
SAFETY SYMBOL AND MESSAGE CONVENTIONS
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
AVIS
RISQUE DE CHOC ELECTRIQUE NE PAS
OUVRIR
This symbol indicates that dangerous voltage constituting a risk of electric shock is
present within this unit
This symbol indicates that there are important operating and maintenance instructions
in the literature accompanying this unit.
SAFETY NOTICE
1. Prior to use, read through this manual
2. Keep the manual in good condition
3. Pay attention to safety warnings
4. Observe all operating requirements
5. Do not use the device near water or wet areas
6. For cleaning, only use a lint-free, dry cloth
7. Install according to the specifications
8. Place away from heat sources or heating appliances
9. Use mains lead provided and avoid damage to cable or connectors
10. Unplug power from mains during stormy weather or if unused for long periods
11. In case of malfunction, water ingress or other damage, consult qualified service personnel
12. Do not place in damp areas or near liquids or moisture. Do not spill liquids on the housing
13. Please pay attention to warning symbols during transit and placement
14. Terminals marked with the symbol are HAZARDOUS LIVE and should only be connected by qualified personnel
15. Ensure that the apparatus is connected to a mains socket with a protective EARTH connection
16. Ensure correct operation of the mains switch
Warning
To prevent the risk of fire or electric shock, do not expose any components to rain or moisture.
If liquids are spilled on the casing, stop using immediately, allow unit to dry out and have checked by qualified personnel before
further use. Avoid impact, extreme pressure or heavy vibration to the case
No user serviceable parts inside Do not open the case refer all servicing to qualified service personnel. – –
Safety
• Check for correct mains voltage and condition of IEC lead before connecting to a power outlet
• Use insulated loop wire, ensuring the correct gauge for the loop distance required
• Do not allow any foreign objects to enter the case or through the ventilation grilles
Placement
• Use the mounting ears supplied when installing into a 19” rack
• For rack-mounting, ensure adequate support for the weight of the amplifier
• Ensure adequate air-flow and do not cover cooling vents at the front and rear of the amplifier
• Ensure adequate access to controls and connections
Cleaning
• Use a soft cloth with a neutral detergent to clean the casing as required
• Use a vacuum cleaner to clear ventilation grilles of any dust or debris build-ups
• Do not use strong solvents for cleaning the unit
952.864UK, 952.867UK User Manual
Introduction
Thank you for choosing Adastra LA series induction loop amplifier for your assisted hearing installation. an
This unit is designed to offer high quality hearing assistance for hearing aid users.
Please read this manual fully and follow the instructions to achieve the best results with your new purchase
and to avoid damage through misuse.
Note: All induction loops in the UK should be installed in accordance with BS7594.
Front panel
1.
Channel 1 input level control
6.
Loop current (master level) control
2.
Channel 2 input level control
7.
Siren indicator
3.
Channel 3 input level control
8.
Loop current level indicator
4.
Bass EQ adjustment
9.
Power switch and indicator
5.
Treble EQ adjustment
Rear panel
10.
Mains voltage selector
15.
Unbalanced RCA inputs
11.
Combined IEC mains inlet and fuse holder
16.
Mic/line level phantom & priority DIP switches ,
12.
Loop output terminals
17.
Combined Slave input/output
13.
Alarm contact terminals
18.
Metal loss correction adjustment
14.
Balanced combo jack/XLR inputs

Specyfikacje produktu

Marka: Adastra
Kategoria: system hi-fi
Model: LA-600 mkII

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Adastra LA-600 mkII, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje system hi-fi Adastra

Adastra

Adastra A14 Instrukcja

2 Października 2024
Adastra

Adastra A200 Instrukcja

25 Września 2024
Adastra

Adastra LA-600 mkII Instrukcja

15 Września 2024
Adastra

Adastra MM3260 Instrukcja

6 Września 2024

Instrukcje system hi-fi

Najnowsze instrukcje dla system hi-fi

AKAI

AKAI EIE Pro Instrukcja

13 Października 2024
Sharp

Sharp XL-540H Instrukcja

11 Października 2024
Kenwood

Kenwood M-9000S Instrukcja

10 Października 2024
GoGen

GoGen MSC 472 BTDAB Instrukcja

9 Października 2024
Morel

Morel SUB-10X Instrukcja

9 Października 2024
Morel

Morel USUB 803 Instrukcja

9 Października 2024
Morel

Morel Soundsub PSW8e-w Instrukcja

9 Października 2024
Morel

Morel Sopran 934 Instrukcja

9 Października 2024
NAD

NAD M10 V3 Instrukcja

9 Października 2024
NUVO

NUVO NV-MPS4-E Instrukcja

8 Października 2024