Instrukcja obsługi ACV BMV

ACV Różne sterowanie klimatem BMV

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla ACV BMV (48 stron) w kategorii Różne sterowanie klimatem. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/48

BMV3 / BMV4 / BMV5 : 662Y1000 • A

BMV3 / BMV4 / BMV5

BMV

INSTALLATION, OPERATION AND

MAINTENANCE INSTRUCTIONS

BMV3 / BMV4 / BMV5 : 662Y1000 • A

Dear customer,

We are pleased that you have decided to purchase an ACV

burner.

The BMV burner model is a modern generation ame burner.

The advantage of this burner construction is the extensive

energy saving operation with very low emissions (Sampling

test according to EN 267:1999-11 Class 3, German environ-

mental label “Blue Angel” according to RAL-UZ 9, Sampling

test according to the Swiss Emissions Regulation LRV).

Every burner is checked in the scope of a thorough nal in-

spection. In addition to the hydraulic and electrical parame-

ters, the appearance of the ame is also inspected.

The warranty period as of the date of purchase (receipt date)

is 2 years.

Please note that the installation, start up and inspection tasks

must be accomplished by a trained technician. The installa-

tion and operating instructions that are provided contain im-

portant information to this purpose.

We recommend a yearly inspection of the burner by a trained

technician to guarantee continuous energy saving and low

emission operation.

Table of contents

1. Technical data 3

1.1 Burner performance 3

1.2 Certification 3

1.3 Operating range 3

1.4 Fuel 3

1.5 Electrical data 3

1.6 Burner dimensions 3

1.7 Acoustic emissions 3

1.8 Burner components 3

2. Assembly 4

2.1 Assembly dimensions 4

2.2 Installing the burner 4

2.3 Service position 4

2.4 Change of nozzle 4

2.5 Nozzle table 4

2.6 Combustion chamber - minimum dimensions 4

2.7 Oil supply 5

2.8 Oil pipes dimensions 5

2.9 Flexible oil line connection of the burner 6

2.10 Electrical connection 6

2.11 General inspections 6

3. Initial operating and maintenance 6

3.1 Adjusting burner 7

3.2 Chimney draft 7

3.3 Combustion air 7

3.4 Flame monitoring 7

3.5 Oil pressure 8

3.6 Final and safety tests 8

3.7 Chimney 8

4. Basic adjustment table 9

5. Electric wiring diagram : LOA24 10

6. Burner quick service 11

7. Troubleshooting 12

Figure 3 — BMV3 / BMV4

Figure 2 — BMV3 / BMV4 / BMV5

Figure 1

BMV3 / BMV4 / BMV5 : 662Y1000 • A

Figure 6

Figure 5

Figure 4

1. TECHNICAL DATA

1.1. Burner performance

Type Oil throughput (kg/h) Burner output (kW)

BMV3 1.4 - 4.1 16 - 48

BMV4 1.4 - 4.1 16 - 48

BMV 5 3.2 - 4.7 38 - 56

* Specications for units with a low pressure furnace and an exhaust

gas loss of approx. 8%.

1.2. Certification

• DIN EN 267:1999-11: register number: 5G966/11

• Class 3 emission limits (only HL60 E/FLV.2-S)

• German ecolabel “Blue Angel” according to RAL-ZU 9: Con-

tract no. 14415 (only HL60 E/FLV.2-S)

1.3. Operating range

• In the chart, you nd allowed combustion chamber pressure

as function of the oil ow (see g. 4).

• The operating ranges have been determined on a test-

ing unit and refer to an altitude of approx. 100 m above

sea-level and a room temperature of approx. 20°C. The

oil ow that can be achieved in practice depends on the

starting resistance of the heater.

• The starting resistance is inuenced by the combustion

chamber, the ue gas line and the starting load. Exact values

can therefore only be determined on each respective system.

1.4. Fuel

• Fuel oil EL according to DIN 51603-1

• Heating oil EL, low sulphur, according to DIN 51603-1

• Fuel oil EL A Bio 10 (bio fuel oil according to DIN SPEC

51603-6, fuel oil EL, low sulphur, with up to 10% of FAME

according to the quality requirements of DIN 14214)

1.5. Electrical data

Nominal voltage ...................................................................230 V ~ 50 Hz

Starting power ................................................................................ca. 435 W

Operating power ..............................................................ca. 135 - 235 W

Contact rating of the thermostats and switches, ......min. 6A~

1.6. Burner dimensions

Specications of dimensions in mm (see g. 5 + 6)

Packing .............................................................l 370 / w 350 / h 485 mm

Transport weight ................................................................................14.5 kg

1.7. Acoustic emissions

The sound pressure level at maximum burner performance

is 57 dB(A).

The measurements were carried out with an accuracy class

2 measuring device according to IEC 60651 at a (horizontal)

distance of 2m.

1.8. Burner components

Item Make Ref

Motor Hanning O1A095-030

Oil pump Danfoss BFP 21 L3

Oil pre-heater Danfoss FPHE 5

Ignition unit Co TRK2-40SHK

Photocell Danfoss LDS 057H7097

Automatic oil ring unit Siemens LOA 24.171B27

Pression foyer en mbar

1,00

0,1

0,2

0,3

0,4

0,5

0,6

2,0

BMV3 / BMV4

BMV5

3,0 4,0 5,0 6,0 7,0

Débit de oul en kg/h

Oil mass flow in kg/h

Combustion chamber pressure in mbar

Specyfikacje produktu

Marka:	ACV
Kategoria:	Różne sterowanie klimatem
Model:	BMV

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z ACV BMV, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje Różne sterowanie klimatem ACV

ACV BMR 31 Instrukcja

1 Lipca 2024

ACV BMV Instrukcja

1 Lipca 2024

Instrukcje Różne sterowanie klimatem

Najnowsze instrukcje dla Różne sterowanie klimatem

AEG AHS50 Instrukcja

16 Stycznia 2025

Elco LOGON B SOL Zonneregelaar Instrukcja

5 Października 2024

Oregon Scientific BA169 weer hub Instrukcja

28 Września 2024

Riello BGK0.1 Instrukcja

28 Września 2024

Premix XR-Serie Instrukcja

28 Września 2024

Elektrobock RJ 402 Instrukcja

27 Września 2024

Elektrobock RJ 401 Instrukcja

27 Września 2024

Elektrobock RJ 403 Instrukcja

27 Września 2024

DGFlow Presflo Instrukcja

27 Września 2024

Kaysun KC-FCD2 Instrukcja

26 Września 2024