Instrukcja obsługi Accu-Chek Active

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Accu-Chek Active (144 stron) w kategorii Bloedsuikermeter. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/144
A
A
A
AA C
C
C
CC
C
C
C
CCCU-
CU-
CU-
CU-CU- HEK
HEK
HEK
HEKHEK
®
Active
BLO OD G LUC OSE SYSTE M
Reference Manual
Please read this manual carefully and completely before performing
the first measurement. Should you have any questions, please
contact our customer support and service centre. You will find our
address in Chapter 10.4.
The Accu-Chek Softclix finger pricker is intended for patient
self-monitoring by a single person.
It must not be used to collect blood in a multi-patient setting
as it does not incorporate any features to guard against
cross-infection.
On packaging, on the type plate and in the parts of this manual
dealing with your Accu-Chek Active meter you may encounter the
following symbols, shown here with their meaning:
For in vitro diagnostic use
This product fulfils the requirements of Directive
98/79/EC on in vitro diagnostic medical devices.
Catalogue number
Please consult instructions for use
Caution (refer to accompanying documents).
Please refer to safety-related notes in the manual
accompanying this instrument.
Manufacturer
IVD
REF
0088
Contents
1
|
Introduction 8
|
1.1 The meter’s main features at a glance 9
|
1.2 About this reference manual 12
|
2
|
14Modes
|
2.1 Test Mode 15
|
2.2 Memory Mode 16
|
2.3 Set Mode 17
|
3
|
Initial steps before testing 18
|
3.1 After opening the pack 18
|
3.2 Basic settings 19
|
Turning the meter on in Set Mode 23
|
Setting the date and time 27
|
Setting the beep tone 31
|
3.3 Coding 32
|
Inserting the coding chip 35
|
1

Specyfikacje produktu

Marka: Accu-Chek
Kategoria: Bloedsuikermeter
Model: Active

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Accu-Chek Active, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą