Instrukcja obsługi AbleNet TrackerPro

AbleNet kamera internetowa TrackerPro

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla AbleNet TrackerPro (2 stron) w kategorii kamera internetowa. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/2
Guide to Troubleshooting Tracker Pro
1) Plug the Tracker pro into the USB port on the computer and observe the following:
a. The bottom white light (Power indicator) turns on as stays on.
b. Three green lights on the top right and left will turn on then go out
c. Around the horn
2) If step 1 was correct the tracker pro is ready for use
a. If the power indicator does not come on check the cord for damage and try a different
USB port
3) Mount the tracker pro so it is facing the user
a. Use the mount bracket to sit on an flat surface
b. Use the mount bracket along with the hook mount to hang the Tracker Pro from a laptop
monitor or flat screen
c. Use the Velcro to attach the tracker pro to a vertical surface
4) Placing the reflective Dot
a. Place the reflective dot on the forehead of the user. Many people use their glasses or a
base ball hat to place the reflective dot.
b. For best results, insure the user is facing the tracker pro and the dot is pointed directly at
the tracker pro.
c. The dot should be between 3 and 6 feet from the tracker pro when in use.
5) Verify the Tracker Pro is acquiring the dot correctly
a. When the Tracker Pro has acquired the dot the blue light at the top of the device will be
on.
b. If the client is having trouble with the curser movement there may be other reflective
surfaces behind the user that is confusing the Tracker pro. To distinguish what is causing
the problem perform the following steps:
i. Block the camera’s view with your hand until the acquire light goes out. Remove
the reflective dot from the client
ii. Move you hand slowly away from the tracker pro until the acquire light goes back
on.
iii. Move left and right to determine where the faulty reflection is located. The
acquire light will go back out when your hand is in a direct line between the
Tracker pro and the object you are looking for. Examples of what you are looking
for are shiny or reflective surfaces like light bulbs, glass cabinets, mirrors
c. Eliminate any objects that are interfering with the ability of the tracker to acquire the
reflective dot.
(continued)
Guide to Troubleshooting Tracker Pro (cont)
6) Tracker pro cursor tracking
a. If everything is working properly the user should be able to move the curser to all areas
of the screen
i. If the curser movement is slow and cannot get to all areas of the screen try the
following.
1. Put the dot on a base ball cap. This way the dot moves farther with the head motion.
2. The tracker pro has an acceleration switch. The switch is located on the right hand side of the
tracker pro the default setting of this switch of down or (off). Turn the switch on and test again.
3. If the acceleration switch is not quite enough you can also adjust the tracking speed of the curser
in the computers settings by following this link
http://www/microsoft.com/hardware/download.aspx?category=MK
a. If the curser movement is not centered, cannot move all the way to one side of the screen
but can the other. Adjust the alignment of the tracker pro to the dot.
If you have any questions, feel free to contact technical support at techsupport@ablenetinc.com or toll
free at (800) 322-0956.

Specyfikacje produktu

Marka: AbleNet
Kategoria: kamera internetowa
Model: TrackerPro

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z AbleNet TrackerPro, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje kamera internetowa AbleNet

AbleNet

AbleNet TrackerPro Instrukcja

20 Sierpnia 2024

Instrukcje kamera internetowa

Najnowsze instrukcje dla kamera internetowa

Pioneer

Pioneer ND-BC20PA Instrukcja

30 Grudnia 2025
Adesso

Adesso CyberTrack H4 Instrukcja

28 Grudnia 2024
Philips

Philips SPL6317 Instrukcja

20 Grudnia 2024
Creative

Creative Live! Cam Sync 4K Instrukcja

15 Grudnia 2024
Aukey

Aukey PC-LM3 Instrukcja

14 Grudnia 2024
Dell

Dell WB5023 Instrukcja

7 Grudnia 2024
Dell

Dell WB3023 Instrukcja

7 Grudnia 2024
OBSBOT

OBSBOT Meet 2 Instrukcja

9 Października 2024
OBSBOT

OBSBOT Tiny 2 Lite Instrukcja

9 Października 2024
OBSBOT

OBSBOT Tiny 4K Instrukcja

9 Października 2024