Instrukcja obsługi Zerowatt ZTO 150E

Zerowatt lodówka ZTO 150E

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Zerowatt ZTO 150E (10 stron) w kategorii lodówka. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/10
BEFORE USING THE APPLIANCE
Your new appliance is designed exclusively
for domestic use.
To ensure best use of your appliance,
carefully read the operating instructions
which contain a description of
the appliance and advice on storing
and preserving food.
Keep this handbook for future reference.
BEFORE USING THE APPLIANCE
1. After unpacking the appliance, make sure
it is not damaged and that the door closes
properly. Any damage must be reported to
the dealer within 24 hours of delivery of
the appliance.
2. Wait at least two hours before switching the
appliance on, in order to ensure that the
refrigerant circuit is fully efficient.
3. Make sure installation and the electrical
connection are carried out by a qualified
technician according to the manufacturer's
instructions and in compliance with the local
safety regulations.
4. Clean the inside of the appliance before
using it.
1. Packing
The packing material is 100% recyclable and
bears the recycling symbol. Comply with the
local regulations for disposal. Keep the
packing materials (plastic bags, polystyrene
parts, etc.) out of the reach of children, as
they are a potential source of danger.
2. Scrapping/Disposal
The appliance is manufactured using
recyclable material.
This appliance is marked in compliance with
European Directive 2002/96/EC on Waste
Electrical and Electronic Equipment (WEEE).
By ensuring the correct scrapping of this appliance,
you can help prevent potentially negative
consequences for the environment and the
health of persons.
The symbol on the appliance, or on the
accompanying documents, indicates that this
appliance should not be treated as domestic
waste but must be taken to a suitable collection
centre for the recycling of electrical and
electronic equipment. When scrapping the
appliance, make it unusable by cutting off the
power cable and removing the doors and shelves
so that children cannot easily climb inside.
Scrap the appliance in compliance with local
regulations on waste disposal, taking it to a
special collection centre; do not leave the appliance
unattended even for a few days, since it
is a potential source of danger for children. For
further information on the treatment, recovery
and recycling of this appliance, contact your
competent local office, the household waste
collection service or the shop where you purchased
the appliance.
Information:
This appliance does not contain CFC (the
refrigerant circuit contains R134a) or HFC
(the refrigerant circuit contains R600a)
(refer to the rating plate inside the
appliance).
Appliances with isobutane (R600a):
Isobutane is a natural gas without environmental
impact but is flammable. Therefore,
make sure the refrigerant circuit pipes are
not damaged.
Declaration of conformity
. This appliance is intended for storing food
and is manufactured in conformity with
European regulation (EC) No. 1935/2004.
. This product has been designed, manufactured
and marketed in compliance with:
- the safety objectives of Low Voltage
Directive 2006/95/EC;
- the protection requirements of EMC
Directive 2004/108/EC
. Electrical safety of the appliance is guaranteed
only if it is connected to an efficient
and approved earthing system
IMPORTANT SAFETY INSTRUCTIONS
These warnings are provided in the interests of your safety. Ensure that you understand
all before installing or using this appliance. Your safety is of paramount importance.
If you are unsure about any of the meanings or these warnings contact the Customer Care Department.
Installation
This appliance is heavy. Care should be taken
when moving it.
It is dangerous to alter the specifications or
attempt to modify this product in any way.
Ensure that the appliance does not stand on
the electrical supply cable. If the supply cord is
damaged, it must be replaced by the manufacturer,
its service agent or similarly qualified
persons in order to avoid a hazard.
Any electrical work required to install this
appliance should be carried out by a qualified
electrician or competent person.
Parts which heat up should not be exposed.
Whenever possible, the back of the appliance
should be close to a wall but leaving the
required distance for ventilation as stated in
the installation instructions.
The appliance should be left for 2 hours after
installation before it is turned on, in order to
allow the refrigerant to settle.
WARNING: Keep ventilation opening, in the
appliance enclosure or in the built-in structure,
clear of obstruction.
Child Safety
This appliance is not intended for use by young
children or infirm persons unless they have
been adequately supervised by a responsible
person to ensure that they can use the appliance
safely.
Young children should be supervised to ensure
that they do not play with the appliance.
During Use
This appliance is designed for domestic use only,
specifically for the storage of edible foodstuffs only.
Frozen food should not be refrozen once it has
thawed out.
Do not place carbonated or fizzy drinks in the
freezer.
Ice lollies can cause 'frost/freezer burns' if
consumed straight from the freezer.
Do not remove items from the freezer if your
hands are damp/wet, as this could cause
skin abrasions or frost/freezer burns.
Maintenance and Cleaning
Switch off, and unplug the appliance before
carrying out any cleaning or maintenance
work.
Do not use sharp instruments to scrape
off frost or ice. (See defrosting instructions).
WARNING: Do not use mechanical devices
or other means to accelerate the defrosting
process, other than those recommended by the
the manufacturer.
WARNING: Do not use electrical appliance
inside the food storage compartments of the
appliance, unless they are of the recommended
WARNING: Do not damage the refrigerant circuit.
Servicing
This product should be serviced by an
authorised engineer, and only genuine spare
parts should be used.
Under no circumstances should you attempt to
repair the machine yourself. Repairs carried
out by inexperienced persons may cause injury
or serious malfunctioning. Contact your local
Service Force Centre.
At the End of the Appliance Life
Before discarding an old PRODUCT, switch off and
disconnect it from the power supply, Cut off and render
any plug useless.
Ensure that the door cannot jam (removing it is best),
regardless of whether or not it can be pushed open
from inside.
AN OLD PRODUCT CAN BE A DEADLY
PLAYTHING FOR CHILDREN
CAUTION: At the end of the function life of
the appliance it must be disposed in accordance
with the W.E.E.E directive (See below). You
appliance contains R600a refrigerant and
inflammable gas in the insulating foam.
Please read this
instruction book carefully
before use and retain
for future reference.
Well Ventilating
There is need of good ventilation around the refrigerator for easy dissipation of heat, high efficiency of refrigeration
and low power consumption. For this purpose, sufficient clear space should be need around the refrigerator. Its
back is at least 100mm away from the wall, its sides at least have a space of 100mm separately and the height
from over its top is not less than 200mm. A clear space should be left to open its doors to 160°.
Power Supply
The refrigerator is only applied with power supply of single phase alternating current of (220-
240)V~/50Hz;230V~/60Hz. If fluctuation of voltage in the district user is of so large that the voltage exceeds the
above scope, for safety sake, be sure to apply a.c. automatic voltage regulator to the refrigerator. The refrigerator
must employ a special power socket instead of common one with other electric appliances. Its plug must match
the socket with ground wire.
Power Line Cord
The cord should be neither lengthened nor folded into coil during operation. Moreover, it is forbidden that cord
is kept close onto the compressor at the back of the refrigerator, the surface temperature of which is quite
high when operating. Touching with it would deactivatethe insulation or cause leakage for electricity.
Protection from Moisture
Avoiding placing the refrigerator in a place where heavy moisture is present so as to minimize possibility of rusty
for its metal parts. Still more, the refrigerator is forbidden to be directly sprayed by water, otherwise, poor insulation
and current leakage would occur.
Protection from Heat
The refrigerator should be far away from any heat source or direct sunshine.
2. CORRECTLY POSITIONING

Specyfikacje produktu

Marka: Zerowatt
Kategoria: lodówka
Model: ZTO 150E

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Zerowatt ZTO 150E, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje lodówka Zerowatt

Zerowatt

Zerowatt ZTLP 130 Instrukcja

7 Października 2024
Zerowatt

Zerowatt ZTO 150E Instrukcja

7 Października 2024
Zerowatt

Zerowatt FR ZW 024 D Instrukcja

7 Października 2024
Zerowatt

Zerowatt FR ZSD 400 Instrukcja

7 Października 2024
Zerowatt

Zerowatt EZHTL 482WN Instrukcja

7 Października 2024
Zerowatt

Zerowatt ZCP 360S Instrukcja

5 Lipca 2024
Zerowatt

Zerowatt ZSD 400 Instrukcja

5 Lipca 2024
Zerowatt

Zerowatt ZMDDS 5142S Instrukcja

5 Lipca 2024

Instrukcje lodówka

Najnowsze instrukcje dla lodówka

Samsung

Samsung RT32K5030EF Instrukcja

15 Października 2024
Liebherr

Liebherr CBNes 4875 Instrukcja

15 Października 2024
Frigidaire

Frigidaire FFPH44M4LM Instrukcja

15 Października 2024
AEG

AEG Santo 70318 KG1 Instrukcja

15 Października 2024
Whirlpool

Whirlpool ART 550 Instrukcja

15 Października 2024
Indesit

Indesit TLA 1 (UK) (0) Instrukcja

15 Października 2024
Hotpoint

Hotpoint HTH18GBCCC Instrukcja

15 Października 2024
Zanker

Zanker ZKK8021 Instrukcja

15 Października 2024
Hoover

Hoover HFF 618 DW Instrukcja

15 Października 2024
Frigidaire

Frigidaire FRT15HB3DQ Instrukcja

15 Października 2024