Instrukcja obsługi Zerowatt ZMS 602 N

Zerowatt piekarnik ZMS 602 N

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Zerowatt ZMS 602 N (53 stron) w kategorii piekarnik. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/53
KULLANIM KILAVUZU
FIRINLAR TR 26
NOTICE D'EMPLOI ET D'INSTALLATION
DES FOURS ENCASTRABLES FR 40
USER INSTRUCTIONS
OVENS
MANUALE D’ISTRUZIONI
FORNO
EN 02
IT 14
• ZFFS140X
• ZFFS140X/E
• ZMS 602 N
CANDY HOOVER GROUP S.R.L. • Via Comolli 16 • 20861 Brugherio (MB) - Italy
Safety Indications
EN 02
During cooking, moisture may condense inside the oven cavity or on the
glass of the door. This is a normal condition. To reduce this effect, wait 10-
15 minutes after turning on the power before putting food inside the oven.
ln any case, the condensation disappears when the oven reaches the
cooking temperature.
Cook the vegetables in a container with a lid instead of an open tray.
Avoid leaving food inside the oven after cooking for more than 15/20
minutes.
WARNING: the appliance and accessible parts become hot during use.
Be careful not to touch any hot parts.
WARNING: the accessible parts can become hot when the grill is in use.
Children should be kept at a safe distance.
WARNING: ensure that the appliance is switched off before replacing the
bulb, to avoid the possibility of electric shocks.
WARNING: in order to avoid any danger caused by the accidental
resetting of the thermal interruption device, the appliance should not be
powered by an external switching device, such as a timer, or be connected
to a circuit that is regularly switched on and off.
Children under 8 should be kept at a safe distance from the appliance if
not continuously supervised.
Children should not play with the appliance.
The appliance can be used by those aged 8 or over and by those with
limited physical, sensorial or mental capacities, without experience or
knowledge of the product, only if supervised or provided with instruction
as to the operation of the appliance, in a safe way with awareness of the
possible risks.
Cleaning and maintenance should not be carried out by unsupervised
children.
Do not use rough or abrasive materials or sharp metal scrapers to clean
the oven door glasses, as they can scratch the surface and cause the glass
to shatter.
The oven must be switched off before removing the removable parts.
After cleaning, reassemble them according the instructions.
EN 03
Only use the meat probe recommended for this oven.
Do not use a steam cleaner for cleaning operations.
Connect a plug to the supply cable that is able to bear the voltage,
current and load indicated on the tag and having the earth contact. The
socket must be suitable for the load indicated on the tag and must have
ground contact connected and in operation. The earth conductor is
yellow-green in colour. This operation should be carried out by a suitably
qualified professional. ln case of incompatibility between the socket and
the appliance plug, ask a qualified electrician to substitute the socket with
another suitable type. The plug and the socket must be conformed to the
current norms of the installation country. Connection to the power source
can also be made by placing an omnipolar breaker between the appliance
and the power source that can bear the maximum connected load and
that is in line with current legislation. The yellow-green earth cable should
not be interrupted by the breaker. The socket or omnipolar breaker used
for the connection should be easily accessible when the appliance is
installed.
• The disconnection may be achieved by having the plug accessible or by
incorporating a switch in the fixed wiring in accordance with the wiring
rules.
• lf the power cable is damaged, it should be substituted with a cable or
special bundle available from the manufacturer or by contacting the
customer service department. The type of power cable must be H05V2V2-
F. This operation should be carried out by a suitably qualified professional.
The earth conductor (yellow-green) must be approximately 10 mm longer
than the other conductors. For any repairs, refer only to the Customer Care
Department and request the use of original spare parts.
Failure to comply with the above can compromise the safety of the
appliance and invalidate the guarantee.
Any excess of spilled material should be removed before cleaning.
A long power supply failure during an occurring cooking phase may cause
a malfunction of the monitor. ln this case contact customer service.
The appliance must not be installed behind a decorative door in order to
avoid overheating.


Specyfikacje produktu

Marka: Zerowatt
Kategoria: piekarnik
Model: ZMS 602 N

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Zerowatt ZMS 602 N, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje piekarnik Zerowatt

Zerowatt

Zerowatt ZMS 602 N Instrukcja

7 Października 2024
Zerowatt

Zerowatt ZMI6C42/E1 Instrukcja

7 Października 2024
Zerowatt

Zerowatt ZFFS140X/E Instrukcja

7 Października 2024
Zerowatt

Zerowatt ZMH6WCLX Instrukcja

7 Października 2024
Zerowatt

Zerowatt ZMS 603 XN Instrukcja

7 Października 2024
Zerowatt

Zerowatt ZH63DTFP/1 Instrukcja

7 Października 2024
Zerowatt

Zerowatt ZFFS302NX/E Instrukcja

7 Października 2024
Zerowatt

Zerowatt ZG 1531 AES Instrukcja

7 Października 2024

Instrukcje piekarnik

Najnowsze instrukcje dla piekarnik

Wolf

Wolf M Series Instrukcja

15 Października 2024
Princess

Princess 112741 Instrukcja

15 Października 2024
Boretti

Boretti VFPNR 1202 IX Instrukcja

15 Października 2024
Ilve

Ilve MDC-120 Instrukcja

15 Października 2024
Frigidaire

Frigidaire FCWD2727AW Instrukcja

15 Października 2024
AEG

AEG IKK74545FB Instrukcja

15 Października 2024
Ilve

Ilve HCPT75D Instrukcja

15 Października 2024
Zanker

Zanker KOU65902XK Instrukcja

15 Października 2024
Hoover

Hoover PHC3B25CXHH64DCT Instrukcja

15 Października 2024