Instrukcja obsługi Zebra HK1358A

Zebra laptop HK1358A

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Zebra HK1358A (147 stron) w kategorii laptop. Ta instrukcja była pomocna dla 12 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/147

Mobile Laptop 900™

Pentium M Model (Model # HK1223)

Motorola, Inc.

Owner’s Manual R01

Part No.: DDN 7415

ML900

Operation Manual

(Pentium M Model # HK1223)

Part Number:799001147001 7990 0114 3001 R01

(April 2006)

TRADEMARKS

All brand and product names are trademarks or registered trademarks of their

respective companies.

NOTE

Information in this manual is subject to change without notice.

be transmitted, stored in a retrieval system, or translated into any language or

computer language, in any form or by any means, without the prior written

permission of Motorola Inc.

Regulations Information

Class B Regulations

USA

Federal Communications Commission Radio Frequency Interference

Statement

NOTE

This equipment has been tested and found to comply with the limits for

a Class B digital device pursuant to Part 15 of the FCC Rules. These

limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates, uses,

and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to

radio communications. However, there is no guarantee that interference

will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is encouraged

to try to correct the interference by one or more of the following

measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from

that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Any changes or modifications not expressly approved by the manufacturer

could void the user’s authority to operate the equipment.

Please note:

The use of a non-shielded interface cable with this equipment is prohibited.

Wireless LAN Module Statement

FCC CAUTION:

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two

conditions: (1) this device may not cause harmful interference, and (2) this device must accept

any interference received, including interference that may cause undesired operation.

FCC RF Exposure Statement

This equipment complies with FCC RF exposure limits set forth for an uncontrolled environment.

This equipment should be installed and operated with a minimum distance of 20cm between the

radiator and your body.

To assure continued compliance, any changes or modifications not expressly approved by the

party responsible for compliance could void the user’s authority to operate this equipment.

Canada

Canadian Department of Communications

Radio Interference Regulations Class B Compliance Notice

This Class B digital apparatus meets all requirements of the Canada Interference-Causing

equipment regulations.

Cet appareil numérique de Classe B respecte toutes les exigences du Règlement Canadien sur le

matériel brouileur.

This digital apparatus does not exceed the Class B limits for radio noise emissions from digital

apparatus set out in the Radio Interference Regulations of the Canadian Department of

Communications.

Le présent appareil numérique n’émet pas de bruits radioélectriques dépassant les limites

applicables aux appareils numériques de la classe B prescrites dans le Règlement sur le brouillage

radioélectrique édicté par le ministère des Communications du Canada.

iii

Canada Radio Frequency Interference Requirements

To prevent radio interference to the licensed service, this device is intended to be

operated indoors and away from windows to provide maximum shielding. Equipment

(or its transmit antenna) that is installed outdoors is subject to licensing.

Pour empêcher que cet appareil cause du brouillage au service faisant l'objet d'une

licence, il doit être utilisé à l'intérieur et devrait être placé loin des fenêtres afin de

fournir un écran de blindage maximal. Si le matériel (ou son antenne d'émission) est

installé à l'extérieur, il doit faire l'objet d'une licence.

SAFE USAGE NOTIFICATION:

For reason of personal safety and optimal radio performance, Motorola

has designed the ML900 with an intended purpose and position of use

either in a secured vehicle docking station or on the top of an office

desk.

Motorola strongly recommends using this product in a vehicle only

when it is physically-secured in a lock or assured-stationary location as

failure to do so may cause the product to cause harm in accidents or

other conditions.

Product Safety and RF Exposure Information

Caution

BEFORE USING THIS RUGGEDIZED LAPTOP , READ THIS SECTION WHICH

CONTAINS IMPORTANT OPERATING INSTRUCTIONS FOR SAFE USAGE AND

RF ENERGY AWARENESS AND CONTROL INFORMATION FOR COMPLIANCE

WITH RF ENERGY EXPOSURE LIMITS IN APPLICABLE NATIONAL AND

INTERNATIONAL STANDARDS.

Compliance with RF Energy Exposure Standards

Note: This ruggedized laptop is intended for general population, consumer or similar use;

where users are not necessarily aware of the potential for exposure and may not exercise

control over their exposure.

This product safety section includes useful information about RF exposure and helpful

instructions on how to control your RF exposures.

For additional information on exposure requirements or other training information, visit

http://www.motorola.com/rfhealth.

Electromagnetic Interference / Compatibility

NOTE: Nearly every electronic device is susceptible to electromagnetic interference

(EMI) if inadequately shielded, designed or otherwise configured for electromagnetic

compatibility.

Facilities

To avoid electromagnetic interference and/or compatibility conflicts, turn off your

ruggedized laptop and/or integrated radios in any facility where posted notices instruct

you to do so. Hospitals or health care facilities may be using equipment that is sensitive to

external RF energy.

Aircraft

When instructed to do so, turn off your ruggedized laptop and/or integrated radios when

on board an aircraft. Any use of a laptop or radio must be in accordance with applicable

regulations per airline crew instructions.

Medical Devices

Pacemakers

Keep the antennas of this data terminal at least 8 inches or 20cm away from any person’s

body. Along with ensuring compliance with the RF energy exposure limits (as instructed

in the RF Energy Exposure section previously), this separation distance meets or exceeds

the distance recommendation of pacemaker manufacturers and the FCC to avoid

interference with pacemakers.

Hearing Aids

Some digital wireless radios may interfere with some hearing aids. In the event of such

interference, you may want to consult your hearing aid manufacturer to discuss

alternatives.

Other Medical Devices

If you use any other personal medical device, consult the manufacturer of your device to

determine if it is adequately shielded from RF energy. Your physician may be able to

assist you in obtaining this information.

Driver Safety

Always abide by the laws and regulations on the use of computers and/or integrated radios

in the area where you drive.

When using your laptop and/or radio while driving, please:

• Give full attention to driving and to the road.

• Pull off the road and park before using the equipment if driving conditions so

require.

Operational Warnings

For Vehicles with an Air Bag

Do not place a ruggedized laptop in the area over an air bag or in the air bag deployment

area. Air bags inflate with great force. If a ruggedized laptop is placed in the air bag

deployment area and the air bag inflates, the laptop may be propelled with great force and

cause serious injury to occupants of the vehicle.

Potentially Explosive Atmospheres

Turn off your ruggedized laptop prior to entering any area with a potentially explosive

atmosphere. Do not remove, install, or charge batteries in such areas. Sparks in a

potentially explosive atmosphere can cause an explosion or fire resulting in bodily injury

or even death.

The areas with potentially explosive atmospheres referred to above include fuelling areas

such as below decks on boats, fuel or chemical transfer or storage facilities, areas where

the air contains chemicals or particles, such as grain, dust or metal powders. Areas with

potentially explosive atmospheres are often but not always posted.

Blasting Caps and Areas

To avoid possible interference with blasting operations, turn off your ruggedized laptop

when you are near electrical blasting caps, in a blasting area, or in areas posted: "Turn off

two-way radio". Obey all signs and instructions.

Operational Cautions

Antennas

Do not use the integrated radios of any ruggedized laptop that has a damaged antenna. If a

damaged antenna comes into contact with your skin, a minor burn can result.

Batteries

All batteries can cause property damage and/or bodily injury such as burns if conductive

materials such as jewelry, keys, or beaded chains touch exposed terminals. The

conductive material may complete an electrical circuit (short circuit) and become quite

hot. Exercise care in handling any charged battery, particularly when placing it inside a

pocket, purse, or other container with metal objects.

vii

LICENSE AGREEMENT

MOTOROLA, INC. (“MOTOROLA”) IS WILLING TO LICENSE THE

SOFTWARE EMBEDDED IN THE ENCLOSED PRODUCT (THE

“SOFTWARE”) TO YOU ONLY ON THE CONDITION THAT YOU

ACCEPT ALL OF THE TERMS CONTAINED IN THIS LICENSE

AGREEMENT (“AGREEMENT”). PLEASE READ THE TERMS

CAREFULLY. YOUR USE OF THE PRODUCT WITH THE

EMBEDDED SOFTWARE WILL INDICATE YOUR ASSENT TO

THEM. IF YOU DO NOT AGREE TO THESE TERMS, THEN

MOTOROLA IS UNWILLING TO LICENSE THE SOFTWARE TO

YOU, IN WHICH EVENT YOU SHOULD NOT USE THE PRODUCT

WITH THE EMBEDDED SOFTWARE AND YOU SHOULD RETURN

IT TO THE PLACE FROM WHICH IT WAS ACQUIRED, AND YOUR

MONEY WILL BE REFUNDED.

Section 1 GRANT OF LICENSE

Motorola hereby grants to You a personal, non-exclusive, non-transferable right

to use the Software subject to the Conditions Of Use set forth in Section 2 below

and the terms and conditions of this Agreement.

Section 2 CONDITIONS OF USE

2.1 Use of the Software outside of the conditions set forth herein is strictly

prohibited and will be deemed a breach of this Agreement.

2.2 You shall use the Software (i) only for Your internal business purposes; (ii)

only as described in the Software or product documentation; and (iii) in

strict accordance with this Agreement.

2.3 You shall not transfer, download, copy, distribute, sublicense, modify,

adapt, merge with other software, reverse engineer, prepare derivative

works of, de-compile or disassemble any Software for any reason.

2.4 You shall not remove, destroy, or alter any proprietary markings or legends

placed upon or contained within the Software, related materials or

documentation.

viii

2.5 You shall not export, re-export, resell, ship or divert or cause to be

exported, re-exported, resold, shipped, or diverted, directly or indirectly,

the Software under this Agreement.

Section 3 TITLE AND OWNERSHIP

Title to all copies of Software will not pass to You at any time and remains

vested exclusively in Motorola or the copyright owner. Motorola or the

concerning the Software, including all rights in patents, patent applications,

inventions, copyrights, trade secrets, trademarks, trade names, and other

intellectual properties. Nothing in this Agreement is intended to restrict the

proprietary rights of Motorola or the copyright owner or to grant by implication

or estoppel any proprietary rights. All intellectual property developed,

originated, or prepared by Motorola or the copyright owner in connection with

providing the Software, products, or related services to You remains vested

exclusively in Motorola or the copyright owner, and this Agreement does not

grant to You any shared development rights of intellectual property.

Section 4 CONFIDENTIALITY

You acknowledge that all Software contains valuable proprietary information

and trade secrets and that unauthorized or improper use of Software will result in

irreparable harm to Motorola for which monetary damages would be inadequate

and for which Motorola will be entitled to immediate injunctive relief.

Accordingly, You will limit access to Software to employees and agents who

need to use the Software for Your internal business purposes, and You will take

appropriate action with those employees and agents to preserve the

confidentiality of Software, using the same degree of care to avoid unauthorized

or improper disclosure as You use for the protection of Your own proprietary

software, but in no event less than reasonable care. Notwithstanding anything to

the contrary herein, You shall have no obligation to preserve the confidentiality

of any proprietary information that (i) was in the public domain at the time of

disclosure; (ii) entered the public domain through no fault of You; (iii) was

given to You free of any obligation to keep it confidential; (iv) is independently

developed by You; or (v) is disclosed as required by law provided that You

notify Motorola prior to such disclosure and provide Motorola with a reasonable

opportunity to respond.

Section 5 RIGHT TO USE MOTOROLA’S NAME

You shall not, during the term of this Agreement or thereafter, use any

trademark of Motorola, or any word or symbol likely to be confused with any

Motorola trademark, either alone or in any combination with another word or

words.

Section 6 PAYMENT

The rights granted hereunder are contingent upon payment for the product in

which the Software is embedded.

Section 7 TERM AND TERMINATION

Your right to use Software will begin when You begin using the product with

the embedded Software, which constitutes acceptance of the terms and

conditions herein, and will continue in perpetuity unless terminated as set forth

herein. Your right to use Software will terminate immediately without notice

upon a breach of this Agreement by You. Otherwise, this Agreement may be

terminated by either party upon thirty (30) days prior written notice. Within

thirty (30) days after termination of this Agreement, You will certify to

Motorola in writing that through Your best efforts, and to the best of Your

knowledge, the original and all copies, in whole in part, in any form, of the

Software and all related material and documentation, have been destroyed.

Section 8 MAINTENANCE

Motorola shall not be responsible for maintenance or field service of the

Software under this Agreement.

Section 9 NO WARRANTY

MOTOROLA DOES NOT WARRANT THAT THE SOFTWARE WILL

MEET YOUR REQUIREMENTS, OR THAT THE OPERATION OF THE

SOFTWARE WILL BE UNINTERRUPTED OR ERROR-FREE.

MOTOROLA DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED,

INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY

AND FITNESS FOR A PARTICULAR PURPOSE.

Section 10 LIMITATION OF LIABILITY

MOTOROLA’S TOTAL LIABILITY UNDER THIS AGREEMENT FOR

DAMAGES SHALL NOT EXCEED THE TOTAL AMOUNT PAID BY YOU

FOR THE SOFTWARE UNDER THIS AGREEMENT. IN NO EVENT WILL

MOTOROLA BE LIABLE FOR INCIDENTAL, CONSEQUENTIAL,

INDIRECT, SPECIAL, OR PUNITIVE DAMAGES.

Section 11 U.S. GOVERNMENT

If You are a unit or agent of the U.S. Government, You acknowledge Motorola’s

representation that the Software represents “Commercial Computer Software”

and that the Government’s use of the Software shall be subject to “Restricted

Rights”, as provided in DFARS 252.227-7013 (c) (1) (ii), or FAR 52.227-19.

Section 12 GOVERNING LAW

This Agreement shall be governed by the laws of the United States of America

to the extent that they apply and otherwise by the laws of the State of Illinois.

Section 13 ASSIGNMENT

This Agreement may not be assigned or otherwise transferred by You.

Section 14 SURVIVAL OF PROVISIONS

The parties agree that where the context of any provision indicates an intent that

it shall survive, the term of this Agreement then it shall survive.

Section 15 ENTIRE AGREEMENT:

This Agreement contains the parties’ entire agreement regarding Your use of

Software and may be amended only in a writing signed by both parties, except

that Motorola may modify this Agreement as necessary to comply with

applicable laws and regulations including FCC regulations.

Section 16 THIRD-PARTY SOFTWARE

The Software may contain one or more items of third-party software supplied by

other third-party suppliers. The terms of this Agreement govern Your use of any

third-party software UNLESS A SEPARATE THIRD-PARTY SOFTWARE

LICENSE IS INCLUDED WITH THIS PACKAGE, IN WHICH CASE YOUR

USE OF THE THIRD-PARTY SOFTWARE WILL THEN BE GOVERNED

BY THE SEPARATE THIRD-PARTY LICENSE.

IF THE FOREGOING TERMS AND CONDITIONS ARE ACCEPTABLE TO

YOU, YOU AGREE THAT YOUR USE OF THE PRODUCT WITH THE

EMBEDDED SOFTWARE WILL INDICATE YOUR ACCEPTANCE OF

THIS AGREEMENT.

IF THE FOREGOING TERMS AND CONDITIONS ARE NOT

ACCEPTABLE TO YOU, THEN MOTOROLA IS UNWILLING TO

LICENSE THE SOFTWARE TO YOU, IN WHICH EVENT YOU SHOULD

NOT USE THE PRODUCT WITH THE EMBEDDED SOFTWARE AND

YOU SHOULD RETURN IT TO THE PLACE FROM WHICH IT WAS

ACQUIRED, AND YOUR MONEY WILL BE REFUNDED.

COMPUTER SOFTWARE COPYRIGHTS

The Motorola products described in this instruction manual may include

copyrighted Motorola computer programs stored in semiconductor memories or

other media. Laws in the United States and other countries preserve for

Motorola certain exclusive rights for copyrighted computer programs, including

the exclusive right to copy or reproduce in any form the copyrighted computer

program. Accordingly, any copyrighted Motorola computer programs contained

in the Motorola products described in this instruction manual may not be copied

or reproduced in any manner without the express written permission of

Motorola. Furthermore, the purchase of Motorola products shall not be deemed

to grant either directly or by implication, estoppels or otherwise, any license

under the copyrights, patents or patent applications of Motorola, except for the

normal non-exclusive, royalty free license to use that arises by operation of law

in the sale of a product.

This Warranty applies within the fifty(50) United States' the District of

Columbia and Canada.

LIMITED WARRANTY

MOTOROLA COMMUNICATION PRODUCTS

xii

If the affected product is being purchased pursuant to a written

Communications System Agreement signed by Motorola, the warranty

contained in that written agreement will apply. Otherwise, the following

warranty applies.

I. WHAT THIS WARRANTY COVERS AND FOR HOW LONG:

Motorola Inc. or if applicable, Motorola Canada Limited ("Motorola",)

warrants the Motorola manufactured radio communications product,

including original equipment crystal devices and channel elements

("Product"), against material defects in material and workmanship

under normal use and service for a period of Three (3)Years from the

date of shipment.

Motorola, at its option, will at no charge either repair the Product (with

new or reconditioned parts), replace it with the same or equivalent

Product (using new or reconditioned Product), or refund the purchase

price of the product during the warranty period provided purchaser

notifies Motorola according to the terms of this warranty. Repaired or

replaced Product is warranted for the balance of the original applicable

warranty period. All replaced parts of the Product shall become the

property of Motorola.

This express limited warranty is extended by Motorola to the original

end user purchaser purchasing the Product for purposes of leasing or

for commercial, industrial, or governmental use only, and is not

assignable or transferable to any other party. This is the complete

warranty for the Product manufactured by Motorola. Motorola assumes

no obligations or liability for additions or modifications to this warranty

unless made in writing and signed by an officer of Motorola. Unless made

in a separate written agreement between Motorola and the original end

user purchaser, Motorola does not warrant the installation maintenance or

service of the Product.

Motorola cannot be responsible in any way for any ancillary equipment

not furnished by Motorola which is attached to or used in connection

with the product, or for operation of the Product with any ancillary

equipment, and all such equipment is expressly excluded from this

xiii

warranty. Because each system which may use the Product is unique,

Motorola disclaims liability for range, coverage, or operation of the

system as a whole under this warranty.

II. GENERAL PROVISIONS:

This warranty sets forth the full extent Motorola’s responsibilities

regarding the product. Repair replacement or Refund of the purchase

price, at Motorola’s option, is the exclusive is the exclusive remedy.

THIS WARRANTY IS GIVEN IN LIEU OF ALL OTHER EXPRESS

WARRANTIES.

xiv

MOTOROLA DISCLAIMS ALL OTHER WARRANTIES OR

CONDITIONS, EXPRESS OR IMPLIED INCLUDING THE IMPLIED

WARRANTIES OR CONDITIONS OF MERCHANTABILITY AND

FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL

MOTOROLA BE LIABLE FOR DAMAGES IN EXCESS OF THE

PURCHASE OF PRICE THE PRODUCT FOR ANY LOSS OF USE

LOSS OF TIME, INCONVE-NIENCE, COMMERCIAL LOSS, LOST

PROFITS OR SAVINGS OR OTHER INCIDENTAL, SPECIAL

INDIRECT OR CONSEQUENTIAL DAMAGES ARISING OUT OF

THE USE OR INABILITY TO USE SUCH PRODUCT TO THE FULL

EXTENT SUCH MAY BE DISCLAMIED By LAW.

III. How TO GET WARRANTY SERVICE:

Purchaser must notify Motorola’s representative or call Motorola’s

Customer Response Center at1.800.247.2346 within the applicable

warranty period for information regarding warranty service.

IV. WHAT THIS WARRANTY DOES NOT COVER:

A) Defects or damage resulting from use of the Product in other than its

normal and customary manner.

B) Defects or damage from misuse, accident, water, or neglect.

C) Defects or damage from improper testing, operation, maintenance,

installation, alteration, modification, or adjustment.

D) Breakage or damage to antennas unless caused directly by defects

in material workmanship.

E) A Product subjected to unauthorized Product modifications,

disassemblies or repairs (including, without limitation, the addition

to the Product of non-Motorola supplied equipment) which adversely

affect performance of the Product or interfere with Motorola’s

normal warranty inspection and testing of the Product to verify any

warranty claim.

F) Product which has had the serial number removed or made illegible.

G) Accessories, including batteries carry their own separate limited One

(1) year warranty.

H) Freight costs to the repair depot.

I) A Product which, due to illegal or unauthorized alteration of the

software/firmware in the Product, does not function in accordance

with Motorola’s published specifications or with the FCC type

acceptance labeling in effect for the Product at the time the Product

was initially distributed from Motorola.

J) Scratches or other cosmetic damage to Product surfaces that do not

affect the operation of the Product.

K) That the software in the product will meet the purchaser’s requirements

or that the operation of the software will be uninterrupted or error-free.

L) Normal and customary wear and tear.

M) Non-Motorola manufactured equipment unless bearing a Motorola

Part Number in the form of an alphanumeric number (i.e.,TDE6030B).

V. GOVERNING LAW

In the case of a Product sold in the United States and Canada, this

Warranty is governed by the laws of the State of Illinois and the

Province of Ontario respectively.

VI. PATENT AND SOFTWARE PROVISIONS:

Motorola will defend, at its own expense, any suit brought against

the end user purchaser to the extent that it is based on a claim that

the Product or its parts infringe a United States patent, and Motorola

will pay those costs and damages finally awarded against the end

user purchaser in any such suit which are attributable to any such

claim, but such defense and payments are conditioned on the

following:

A) That Motorola will be notified promptly in writing by such purchaser

of any notice of such claim;

B) That Motorola will have sole control of the defense of such suit

and all negotiations for its settlement or compromise; and

C) Should the Product or its parts become, or in Motorola’s opinion be

likely to become, the subject of a claim of infringement of a United

xvi

States patent, that such purchaser will permit Motorola, at its option

and expense, either to procure for such purchaser the right to

continue using the product or its parts or to replace or modify the

same so that it becomes non-infringing or to grant such purchaser a

credit for the Product or its parts as depredated and accept its return.

The depreciation will be an equal amount per year over the lifetime

of the product or its parts as established by Motorola.

Motorola will have no liability with respect to any claim of patent

infringement which is based upon the combination of the Product or its

parts furnished hereunder with software, apparatus or devices not

furnished by Motorola, nor will Motorola have any liability for the use

of ancillary equipment or software not furnished by Motorola which is

attached to or used in connection with the Product. The foregoing

states the entire liability of Motorola with respect to infringement of

patents by the Product or any of its parts thereof.

xvii

About the Battery

Caution Texts Concerning Lithium Batteries

DANISH

ADVARSEL!

Lithiumbatteri – Eksplosionsfare ved fejlagtig håndtering. Udskiftning må kun ske med

batteri af samme fabrikat og type. Levér det brugte batteri tilbage til leverandøren.

NORWEGIAN

ADVARSEL:

Eksplosjonsfare ved feilaktig skifte av batteri. Benytt samme batteritype eller en

tilsvarende type anbefalt av apparatfabrikanten. Brukte batterier kasseres i henhold til

fabrikantens instruksjoner.

SWEDISH

VARNING:

Explosionsfara vid felaktigt batteribyte. Använd samma batterityp eller en ekvivalent typ

som rekommenderas av apparattillverkaren. Kassera använt batteri enligt fabrikantens

instruktion.

FINNISH

VAROITUS:

Paristo voi räjähtää, jos se on virheellisesti asennettu. Vaihda paristo ainoastaan

valmistajan suosittelemaan tyyppiin. Hävitä käytetty paristo valmistajan ohjeiden

mukaisesti.

ENGLISH

CAUTION:

Danger of explosion if battery is incorrectly replaced. Replace only with the same or

equivalent type recommended by the equipment manufacturer. Discard used batteries

according to manufacturer's instructions.

DEUTSCH

VORSICHT:

Explosionsgefahr bei unsachgemäßem Austausch der Batterie. Ersatz nur durch

denselben oder einen vom Hersteller empfohlenen gleich-wertigen Typ. Entsorgung

gebrauchter Batterien nach Angaben des Herstellers.

xviii

FRENCH

ATTENTION:

II y a danger d’explosion s’il y a remplacement incorrect de la batterie. Remplacer

uniquement avec une batterie du même type ou d’un type équivalent recommandé par le

constructeur. Mettre au rebut les batteries usagées conformément aux instructions du

fabricant.

Attention (for USA Users)

The product that you have purchased contains a rechargeable battery. The battery is

recyclable. At the end of its useful life, under various state and local laws, it may be illegal

to dispose of this battery into the municipal waste stream. Check with your local solid

waste officials for details in your area for recycling options or proper disposal.

About the Modem

Caution

1. Never install telephone wiring during a lightning storm.

2. Never install telephone jacks in wet locations unless the jack is specifically designed

for wet locations.

3. Never touch uninsulated unless the telephone line has telephone wires or terminals

been disconnected at the network interface.

4. Use caution when installing or modifying telephone lines.

5. Avoid using the telephone function (other than a cordless-type) during an electrical

storm. There may be a remote risk of electric shock from lightning.

6. Do not use the telephone function to report a gas leak in the vicinity of the leak.

7. Do not use this product near water, for example near a bathtub, wash bowl, kitchen

sink or laundry tub, in a wet basement or near a swimming pool.

About the AC Adapter

1. Use only the AC adapter supplied with your computer. Use of another type of AC

adapter will result in malfunction and/or danger.

2. Do not use the adapter in a high moisture environment. Never touch the adapter when

your hands or feet are wet.

3. Allow adequate ventilation around the adapter when using it to operate the device or

charge the battery. Do not cover the AC adapter with paper or other objects that will

reduce cooling. Do not use the AC adapter while it is inside a carrying case.

xix

4. Connect the adapter to a proper power source. The voltage requirements are found on

the product case and/or packaging.

5. Do not use the adapter if the cord becomes damaged.

6. Do not attempt to service the unit. There are no serviceable parts inside. Replace the

unit if it is damaged or exposed to excess moisture.

Table of Contents

Preface...................................................................................... vii

Chapter 1 Getting Started.....................................................1-1

Getting the Computer Running................................................1-2

Unpacking ..........................................................................1-2

Connecting to AC Power ...................................................1-3

Opening the Cover .............................................................1-4

Turning On and Off the Computer.....................................1-5

Taking a Look at the Computer ...............................................1-6

Right-Side Components .....................................................1-6

Left-Side Components .......................................................1-7

Rear Components...............................................................1-8

Front Components..............................................................1-9

Bottom-Side Components................................................1-10

Top-open Components.....................................................1-12

Where to Go from Here .........................................................1-14

Chapter 2 Operating Your Computer................................... 2-1

Starting and Stopping the Computer........................................2-2

Starting the Computer ........................................................2-2

Stopping the Computer ......................................................2-2

Using the Keyboard .................................................................2-4

Typewriter Keys.................................................................2-4

Cursor-Control Keys ..........................................................2-5

xxii

Power-Saving Tips...................................................................3-9

Chapter 4 Expanding Your Computer.................................. 4-1

Connecting an External Monitor..............................................4-2

Connecting a USB Device .......................................................4-3

Connecting a Serial Device......................................................4-4

Connecting an IR Device.........................................................4-5

Connecting a Bluetooth-compliant Device (option) ................4-7

Connecting a Video Capture Device......................................4-10

System Memory Upgrade ......................................................4-11

Chapter 5 Setup Configuration Utility (SCU).......................5-1

When and How to Use the SCU Program................................5-2

When to Use.......................................................................5-2

Starting SCU ......................................................................5-2

Moving Around and Making Selections ............................5-4

Main Menu...............................................................................5-5

Advanced Menu.......................................................................5-8

Security Menu..........................................................................5-9

Boot Menu .............................................................................5-13

Exit Menu ..............................................................................5-14

Chapter 6 Installing Software Drivers..................................6-1

How to Use the Driver CD.......................................................6-2

Installing the Fingerprint Driver ........................................6-6

Installing the Video Capture Driver.................................6-10

Chapter 7 Caring for the Computer .....................................7-1

Protecting the Computer ..........................................................7-2

Using the Password ............................................................7-2

Using an Anti-Virus Strategy.............................................7-2

Taking Care of the Computer ..................................................7-3

Location Guidelines ...........................................................7-3

General Guidelines.............................................................7-3

Cleaning Guidelines...........................................................7-4

xxv

Preface

This manual contains information that will help you operate the

computer. It is divided into 8 chapters and 3 appendices.

Chapter 1, Getting Started, takes you through the process of setting up

the computer and identifying its external components.

Chapter 2, Operating Your Computer, tells you how to use the

computer’s components and features.

Chapter 3, Managing Power, provides information on power.

Chapter 4, Expanding Your Computer, provides information on

installing and using peripheral devices.

Chapter 5, SCU (Setup Configuration Utility), describes the SCU

program that configures the computer’s BIOS settings.

Chapter 6, Installing Software Drivers, describes how to install the

drivers and utilities supplied with the computer.

Chapter 7, , gives you tips in care and Caring for the Computer

maintenance.

Chapter 8, Troubleshooting, gives solutions to common problems you

may encounter when using the computer.

Appendix A, Specifications, gives a brief specification of the computer.

xxvi

Appendix B, Fingerprint Recognition System, provides information on

using the system’s fingerprint recognition system.

Notational Conventions

Throughout this manual, the following conventions are used to

distinguish elements of text.

NOTE: identifies additional information that requires special attention.

CAUTION: identifies important information which, if not followed, may result in loss of

data or damage to the computer.

Keyboard keys are shown in a bold typeset. For example:

Press Enter to complete.

When keys are joined by a plus sign (+), press the first key, and, while

keeping the first key down, press the remaining keys, finally release all

the keys. When necessary, keys are also shown in graphics.

A title, command, setup item, or button that you can see on the screen is

shown in boldface. A value or an option that you can select for a setup

item is shown in italic. For example:

Select Power Management, set it to Enabled, and then click the

OK button.

CHAPTER 1

Getting Started

Congratulations on purchasing this computer.

This high performance notebook computer is especially designed for the

practical applications of warehouses, automobiles, vehicles, public

security, repairing, assisting the handicapped, and other demanding

situations where conventional notebook computers just cannot measure

up.

This chapter first tells you step by step how to get the computer up and

running. You will find instructions for these procedures:

 Unpacking

 Connecting to AC power

 Opening the cover

 Turning on the computer

 Turning off the computer

Then, you will find a section briefly introducing the external components

of the computer. And the last section navigates you to the information

you may need after the computer is ready for use.

1-2 Getting Started

Getting the Computer Running

This section guides you through the procedures for getting the computer

ready for operation.

Unpacking

After unpacking the shipping carton, you should find these standard

items:

 Notebook computer

 Accessories:

− AC adapter (100~240 VAC, 50/60 Hz)

− AC power cord (US/CE/UK/SA)

− Battery

− RGB-to-DVI Adapter

− CD including Drivers and User Manual

− Windows XP Operating System CD

Inspect all the items. If any item is damaged or missing, notify your

dealer immediately.

Keep the shipping carton and packing materials in case you need to ship

or store the computer in the future.

Connecting to AC Power

The computer operates either on the external AC power or internal

battery power. It is suggested that you use AC power when you start up

the computer for the first time.

CAUTION: Use only the AC adapter included with your computer. Using other AC

adapters may damage the computer.

Getting Started 1-3

NOTE:

Power Supply Cord: (optional) Detachable, minimum 1.5 m long. Listed, rated

minimum 125 V, 7 A, having a 2/18 AWG, type SVT flexible cord. One end terminates

with a parallel blade, molded-on, attachments plug with a 7 A, 125 V (NEMA 1-15P)

configuration; other end terminates with a molded-on appliance coupler.

Alternative: (optional) Detachable, maximum 4.5 m (14.76 ft) long. Listed, rated

minimum 250 V, 6 A, having a 3/18 AWG, type SVT flexible cord. One end terminates

with a Tandem blade, grounding, listed molded-on, attachments plug with a 6 A, 250 V

(NEMA 6-15P) configuration; other end terminates with a molded-on appliance

coupler.

1. Make sure the computer is turned off.

2. Plug the DC cord of the AC adapter to the power connector on the

rear side of the computer () .

3. Plug the female end of the AC power cord to the AC adapter and the

male end to an electrical outlet () .

4. When the AC adapter is connected, the indicator on the AC adapter

lights up, indicating that power is being supplied from the electrical

outlet to the AC adapter and onto your computer. Now, you are ready

to turn on the computer.

1-4 Getting Started

CAUTION:

 When you disconnect the AC adapter, disconnect from the electrical outlet first and

then from the computer. A reverse procedure may damage the AC adapter or the

computer.

 When unplugging the connector, always hold the plug head. Never pull on the cord.

NOTE: When the AC adapter is connected, it also charges the battery pack. For

information on using battery power, see Chapter 3.

Opening the Cover

CAUTION: Be gentle when opening and closing the cover. Opening it vigorously or

slamming it shut could damage the computer.

1. Open the top cover by pulling on the handle, inserting your index

finger, and then pulling on the cover latch.

2. Lift up the cover. You can tilt the cover forward or backward for

optimal viewing clarity.

Turning On and Off the Computer

Turning On

1. Make sure the computer has a charged battery or is connected to an

AC power supply.

2. Press the power button.

Getting Started 1-5

3. Each time the computer is turned on, it performs a Power-On Self

Test (POST), and the operating system such as Windows should

start.

Turning Off

To turn off the computer safely , use the “Shut Down” command of your

operating system.

NOTE: There are other ways you can stop the computer so that you will be back to

where you left off when you next turn on the computer. (See “Stopping the Computer”

in Chapter 2 for information.)

CAUTION: If you have to turn the computer on again immediately after turning it off,

wait for at least five seconds. Turning the computer off and on rapidly can damage it.

1-6 Getting Started

Taking a Look at the Computer

This section identifies the external components of the computer and

briefly describes the function of each component.

NOTE: Depending on the model you purchased, the appearance of your computer may

not exactly be the same as those shown in this manual.

Right-Side Components

Ref Component Description See Also

 PC Card Slot Accepts a PC card for additional functions. P. 4-6

 RJ-11

Connector

Connects the telephone line. P. 2-19

 USB Ports Each of the two ports connects a USB device,

such as a USB floppy drive, printer, digital

camera, joystick, and more.

P. 4-3

 RJ-45

Connector

Connects the LAN cable. Includes a Link

Indicator and an Active Indicator.

P. 2-21

 DVD/Combo/

DVD Dual

Drive

Accepts a compact disc (CD) for installing or

loading software, accessing data, and playing

music/video.

P. 2-15

Getting Started 1-7

Left-Side Components

Ref Component Description See Also

 IR Transceiver Connects an IrDA-compliant device for wireless

data transfer.

P. 4-5

 Bluetooth

Transceiver

(option)

Connects a bluetooth-capable device for

wireless data transfer.

P. 4-5

 Microphone

Connector

Connects an external microphone. P. 2-20

 Keyboard BIOS

Reset Switch

Use this to turn off the system when resetting the

system using Ctrl+Alt+Del does not work.

P. 8-15

 Audio Output

Connector

Connects a set of headphones, external speakers

with amplifier, or an audio recording device.

P. 2-20

1-8 Getting Started

Rear Components

Ref Component Description See Also

 DVI-I Port Connects an external monitor with a DVI

interface.

P. 4-2

 Serial Port Connects a serial device, such as an external

modem.

P. 4-4

 Docking Port For connecting to a Port Replicator / car mount

(both are available as an option).

 Rear Cover

Latch

Locks the rear cover.

 AV Input Port Connects to a video recording device. P. 4-7

 Power

Connector

Connects the AC adapter. P. 1-3

Glows green when the computer is using AC

power.

 AC Power

Indicator

Blinks amber (orange) when the computer, using

AC power, is in Standby mode.

P. 1-3

Glows green when the battery is fully charged

and connected to AC power.

 Battery Charge

Indicator

Glows amber (orange) when the battery is being

charged.

P. 3-3

Getting Started 1-9

Front Components

Ref Component Description See Also

 Wireless

Modem

Antenna

Serves as the antenna for the optional wireless

modem (RDLAP, GPRS, iDEN, and CDMA).

P. 2-24

 Stereo Speaker

Set

Sends out sound and voice from the computer. P. 2-19

Handle Allows you to carry your computer for an easy

grip.





Wireless LAN

Antenna

Serves as the antenna for the WLAN. It is

built-in the cober latch

P. 2-22

GPS Antenna

(option)

Serves as the antenna for the Global Positioning

System (GPS). It is built-in the top cover latch.

P. 2-25





Top Cover

Latch

Locks the top cover. P. 1-4

1-10 Getting Started

Bottom-Side Components

Ref Component Description See Also

 X-bay Module

Antenna

Connector

Serves as the interface between the system and

antenna of the optional X-bay module.

 DVD/Combo/

DVD Dual

Drive Lock/

Unlock Switch

Allows you to lock the DVD/Combo/DVD Dual

drive in place.

P. 2-15

 DVD/Combo/

DVD Dual

Drive Eject

Latch

Allows you to remove the DVD/Combo/DVD

Dual drive.

P. 2-15

 GPS Antenna

Connector

Serves as the interface between the system and

external GPS antenna.

P. 2-25

Getting Started 1-11

Ref Component Description See Also

 CPU Socket and

Sealed CPU

Cooling Fan

Inside is the CPU of your computer and cooling

fan to protect it from overheating.

 Ventilation

Openings

Do not cover or block the ventilation openings

for air circulation thus preventing overheating.

 Battery Pack Supplies power to your computer when external

power is not connected.

P. 3-3

X-bay Interface

(top right)

Connects additional wireless modem (GPRS/

GSM or iDEN).

Mini PCI Slot

(bottom right)

Inside is the Mini PCI slot for using an optional

Mini PCI card.

Hard Disk

Drive

Compartment

(top left)

Contains the hard disk drive of your computer. P. 2-13



Memory Slot

(bottom left)

Contains the memory slot for expanding the

memory size of your computer.

P. 4-8

1-12 Getting Started

Top-open Components

Ref Component Description See Also

 Fingerprint

Scanner

Contains the fingerprint sensor. P. B-1

 Keyboard Serves as the data input device of the computer. P. 2-4

 Power Button Turns the computer power ON and OFF. P. 1-5

Getting Started 1-13

Ref Component Description See Also

Device

Indicators

Show the current status of the computer’s

devices.

Power on / Standby mode indicator P. 1-3

Hard disk drive in-use indicator P. 2-13

Num Lock indicator P. 2-6

Caps Lock indicator P. 2-4



Scroll Lock indicator P. 2-4

 LCD Screen Displays the output of the computer. P. 2-17

 Light Sensor Automatic light sensor for dimming the

display’s backlight. Will function only if your

system comes with the optional sunlight

readable transflective LCD display and/or

keyboard with optional backlight function.

P. 2-17

 Touchpad Serves as the pointing device of the computer. P. 2-9

 Device

Indicators

Show the current status of the computer’s

devices.

DVD/Combo/DVD Dual drive in-use indicator P. 2-14

Blinks amber (orange) when the battery is

almost completely discharged.

P. 3-3

Battery charge indicator –

Glows green when the battery is fully charged

and connected to AC power.

Glows amber (orange) when the battery is being

charged.

P. 3-3

Touchpad indicator –

Glows red when the touchpad is disabled. Can

be enabled/disabled using the hot keys Fn F7+ .

P. 2-9

AC in and HDD heater on indicator –

Glows green when the computer is connected to

AC power.

Blinks red when the hard disk heater is on.

P. 1-5

P. 2-13

1-14 Getting Started

Where to Go from Here

As your computer is ready for operation, you may want to do any of the

following now:

For this purpose… Do this…

To know more about the computer… Go on to the next chapter.

To install the operating system if your

dealer has not already done so…

See the operating system manual.

To know more about the operating

system…

Read the operating system manual.

To install the drivers if your dealer has

not already done so…

See Chapter 6.

To set a power-on password… See “Security Menu” in Chapter 5.

To charge the battery pack for the first

time…

See “Charging the Battery Pack” in

Chapter 3.

CHAPTER 2

Operating Your Computer

This chapter provides information about the use of the computer.

If you are new to computers, reading this chapter will help you learn the

operating basics. If you are already a computer user but are new to

notebook computers, you may choose to read only the parts containing

information unique to your computer.

Described in this chapter are the operating basics of these components:

 Keyboard

 Touchpad

 Touchscreen

 Hard disk drive

 DVD/Combo/DVD Dual drive

And these features:

 Starting and stopping the computer

 Video features

 Audio features

 Communication features

2-2 Operating Your Computer

Starting and Stopping the Computer

There are a number of ways to start and stop the computer.

Starting the Computer

You always start the computer using the power button.

A computer starts up with an operating system (OS) existing on the

storage device such as the hard disk; or from a CD if you have the

respective modules installed. The computer will automatically load the

OS after you turn it on. This process is called booting.

NOTE:

An operating system is the platform for

all your software application programs to

run on. The most widely used operating system today is Microsoft Windows.

Stopping the Computer

When you finish a working session, you can stop the computer by turning

off the power or leaving the computer in Standby or Hibernation mode:

To stop in

this mode…

Do this… To start up or

resume again

Off Follow the shutdown procedure of your

operating system. This can prevent loss of

unsaved data or damage to your software

programs.

If the system is locked up because of

hardware or software problems, press the

power button to turn off the computer.

Press the power

button.

Standby Depending on your settings in Windows,

you can place the computer in Standby

mode by:

• Closing the display cover

• Pressing the power button

Press any key.

Operating Your Computer 2-3

To stop in

this mode…

Do this… To start up or

resume again

Hibernation Depending on your settings in Windows,

you can place the computer in

Hibernation mode by:

• Closing the display cover.

• Pressing the power button

Press the power

button.

If you choose to stop in Standby or Hibernation mode, you can return to

where you left off the next time you start up the computer. (See “Power

Management” in Chapter 3 for more information.)

2-4 Operating Your Computer

Using the Keyboard

Your keyboard has all the standard functions of a full-sized computer

keyboard plus a Fn key added for specific functions.

The standard functions of the keyboard can be further divided into four

major categories:

 Typewriter keys

 Cursor-control keys

 Numeric keys

 Function keys

Typewriter Keys

Typewriter keys are similar to the keys on a typewriter. Several keys are

added such as the Ctrl, Alt, Esc, and lock keys for special purposes. When

the lock keys (Caps Lock, Num Lk, and Scroll Lk) are pressed, their

corresponding indicators light up.

The Control key is normally used in combination with other keys for

program-specific functions. The Alternate key is normally used in

combination with other keys for program-specific functions. The Escape

key is usually used for stopping a process. Examples are exiting a

program and canceling a command. The function depends on the program

you are using.

Operating Your Computer 2-5

Cursor-Control Keys

NOTE: The word “cursor” refers to the indicator on the screen that lets you know

exactly where on your screen anything you type will appear. It can take the form of a

vertical or horizontal line, a block, or one of many other shapes.

Numeric Keypad

A 15-key numeric keypad is embedded in the typewriter keys as shown

2-6 Operating Your Computer

Numeric keys facilitate entering of numbers and calculations. When Num

Lock is on, the numeric keys are activated; meaning you can use these

keys to enter numerals.

NOTES:

 When the numeric keypad is activated and you need to type the English letter in the

keypad area, you can turn Num Lock off or you can press Fn and then the letter

without turning Num Lock off.

 Some software may not be able to use the numeric keypad on the computer. If so,

use the numeric keypad on an external keyboard instead.

Euro Symbol

You can press the Euro dollar sign on the keyboard.

 To press the Euro sign on the keyboard, hold down either of the Alt

keys and type 0128 on the numeric keypad of your keyboard.

 To press the Euro sign on an UK keyboard, hold down the Alt Gr key

and press 4 (which has an Euro sign on it).

Windows Keys

The keyboard has two keys that perform Windows-specific functions:

Windows Logo key and Application key.

The Windows Logo key opens the Start menu and performs

software-specific functions when used in combination with other keys.

The Application key usually has the same effect as a right mouse

click. (See your Windows manual for more information.)

Function Keys

On the top row of the keys are the function keys: F1

to F12

. Function keys

are multi-purpose keys that perform functions defined by individual

programs.

Operating Your Computer 2-7

Fn Key

The Fn key, at the lower left corner of the keyboard, is used with another

key to perform the alternative function of a key. The letter “Fn” and the

alternative functions are identified by the color of blue on the keytop. To

perform a desired function, first press and hold Fn, then press the other

key.

Hot Keys

Hot keys refer to a combination of keys that can be pressed any time to

activate special functions of the computer. Most hot keys operate in a

cyclic way. Each time a hot key combination is pressed, it shifts the

corresponding function to the other or next choice.

You can easily identify the hot keys with the icons imprinted on the

keytop. The hot keys are described next.

Key Description

Switches the optional keyboard backlight function on/off with

10 levels of brightness in-between.

Decreases the sound volume.

Increases the sound volume.

Decreases the LCD brightness.

Increases the LCD brightness.

Switches the touchpad on and off.

Switches LCD off and on.

2-8 Operating Your Computer

Key Description

Switches the display output to one of the following when an

external device is connected.

Upon booting the system with CRT:

LCD LCD & CRT

CRT

Upon booting the system with DVI:

LCD LCD & DVI

DVI

NOTES:

 When in full screen DOS mode, or when playing DVD or

MPEG file, display switching is not allowed.

 If the display mode is set to 256 colors or lower, or in DOS

mode, there will be only two modes for selecting: CRT only

and LCD & CRT.

 This function only applies to Plug & Play CRT monitors.

Serves as the sleep button that you can define with Windows’

Power Management. (See the “Power Management” in

Chapter 3.)

Switches the LCD backlight on and off.

Switches the optional GPS function on and off.

Operating Your Computer 2-9

Using the Touchpad

CAUTION: Do not use a sharp object such as a pen on the touchpad. Doing so may

damage the touchpad surface.

NOTES:

 By default, the touchpad is disabled. Use the Fn F7+ hot keys to enable/disable this

function. The touchpad indicator found on the keyboard panel glows red when it is

disabled.

 For optimal performance of the touchpad, keep your fingers and the pads clean and

dry. When tapping on the pad, tap lightly. Do not use excessive force.

The touchpad is a pointing device that allows you to communicate with

the computer by controlling the location of the pointer on the screen and

making selection with the buttons.

The touchpad consists of a rectangular pad and four buttons. To use the

touchpad, place your forefinger or thumb on the pad. The rectangular pad

acts like a miniature duplicate of your display. As you slide your fingertip

across the pad, the pointer (also called cursor) on the screen moves

accordingly. When your nger reaches the edge of the pad, simply

relocate yourself by lifting the finger and placing it on the other side of

the pad.

Here are some common terms that you should know when using the

touchpad:

2-10 Operating Your Computer

Term Action

Point Move your finger on the pad until the cursor points to the

selection on the screen.

Click Press and release the left button.

–or–

Tap gently anywhere on the pad.

Double-

click

Press and release the left button twice in quick succession.

–or–

Tap twice on the pad rapidly.

Drag

and

drop

Press and hold the left button, then move your finger until you

reach your destination (drag). Finally, release the button (drop)

when you finish dragging your selection to the destination. The

object will drop into the new location.

–or–

Gently tap twice on the pad and on the second tap, keep your

finger in contact with the pad. Then, move your finger across the

pad to drag the selected object to your destination. When you lift

your finger from the pad, the selected object will drop into place.

Scroll To scroll is to move up and down or left and right in the working

area on the screen.

The scroll button located between the two buttons under the

touchpad can be used to move vertically in a convenient way.

Press the upper part of the scroll button to move up and the lower

part of the scroll button to move down.

–or–

To move vertically, place your nger on the right edge of the

pad and slide your finger up and down along the edge. To move

horizontally, place your finger on the bottom edge of the pad and

slide your finger left and right.

This function works only after you install the touchpad driver

supplied with the computer and it may not work for all

applications.

TABLE NOTE: If you swap the left and right buttons, “tapping” on the touchpad

as an alternative method of pressing the left button will no longer be valid.

Operating Your Computer 2-11

Conguring the Touchpad

You may want to configure the touchpad to suit your needs. For example,

if you are a left-handed user, you can swap the two buttons so that you

can use the right button as the left button and vise versa. You can also

change the size of the on-screen pointer, the speed of the pointer, and so

on.

To configure the touchpad, you can use the standard Microsoft or IBM

PS/2 driver if you are using Windows. However, you can install the

touchpad driver supplied with your computer to take advantage of more

powerful features. (For information on installing the driver, see “How to

Use the Driver CD” in Chapter 6.)

This section needs to be looked at.

2-12 Operating Your Computer

Using the Touchscreen (option)

CAUTION: Do not use a sharp object such as a ballpoint pen or pencil on the

touchscreen. Doing so may damage the touchscreen surface.

The touchscreen is a touch-sensitive device that allows you to

communicate with the computer by controlling the location of the pointer

on the screen and making selection with the buttons.

The touchscreen allows you to easily use the computer without a mouse

or touchpad.

Here are some common terms that you should know when using the

touchscreen:

Term Action

Click/Point Tap gently on the touchscreen.

Double-click Tap twice on the touchscreen rapidly.

Drag and

drop

Press lightly on the touchscreen and move your finger

until you reach your destination (drag). Finally, release

your finger (drop) when you finish dragging your selection

to the destination. The object will drop into the new

location.

Scroll To scroll is to move up and down or left and right in the

working area on the screen.

To move vertically, place your finger on the right edge of

the touchscreen and slide your finger up and down along

the edge. To move horizontally, place your finger on the

bottom edge of the touchscreen and slide your finger left

and right.

This function works only after you install the touchscreen

driver supplied with the computer and it may not work for

all applications.

Operating Your Computer 2-13

Using the Hard Disk Drive

Your computer comes with a hard disk drive as drive C. A hard disk drive

is a storage device with non-removable, rotating, magnetic storage

platters inside it. It is where your operating system and application

software programs are stored.

Your hard disk drive is a 2.5-inch IDE (Integrated Drive Electronics) hard

disk drive. This type of drive embodies the latest in fast, reliable mass

storage by integrating all the control circuitry necessary for operation

directly onto the drive itself. This allows the drive manufacturer to

carefully optimize drive performance.

The system comes with a built-in heater that automatically turns on for

low temperature operation. The AC in / HDD heater on indicator blinks

red when heater is on. In low temperature environments, the user is

recommended to operate the system using AC power to conserve battery

life.

CAUTION:

 Make regular backups of your data files from your hard disk drive to CD discs or

other storage media.

 Never try to remove or install the hard disk drive while the computer is powered on.

Doing so can result in loss of data, and can damage the computer and the hard disk

drive’s sensitive circuitry.

 Never turn off or reset the computer while the hard disk drive in-use indicator is on.

C in /

HDD heater on

indicator

2-14 Operating Your Computer

Using the DVD/Combo/DVD Dual Drive

Depending on the model, your computer comes with a DVD, Combo, or

DVD Dual drive located on the right side of the computer. This drive is

usually configured as drive D.

The drive uses removable 5.25-inch silver discs, which look like standard

music CDs. It is an ideal medium to use for distributing multimedia

because of the huge amount of data that a disc can store.

Depending on the model, your drive is one of the following:

 DVD drive can read DVD (Digital Versatile Disc) discs in addition

to CDs, audio CDs, CD-R, and CD-RW discs.

 Combo drive can work both as a DVD drive and CD-RW drive.



DVD Dual drive

aside from working as a Combo drive, can also

write to DVD-R, DVD-RW, DVD+R, DVD+RW discs.

NOTE: If the DVD/Combo/DVD Dual drive would be operating for more than half an

hour (such as showing a DVD title), use the AC power source instead of the battery. If

not, the battery may run out of power before the operation is complete.

CAUTION:

1. When inserting a disc, do not use force.

2. Make sure the disc is correctly inserted into the tray, and then close the tray.

3. Do not leave the DVD tray open. Also, avoid touching the lens in the tray with your

hand. If the lens becomes dirty, the drive may malfunction.

4. Do not wipe the lens using materials with rough surface (such as paper towel).

Instead, use a cotton swab to gently wipe the lens.

FDA regulations require the following statement for all laser-based devices:

“Caution, Use of controls or adjustments or performance of procedures other than

those specified herein may result in hazardous radiation exposure.”

NOTES:

 This product incorporates copyright protection technology that is protected by

method claims of certain U.S. patents and other intellectual property rights owned

by Macrovision Corporation and other rights owners. Use of this copyright

protection technology must be authorized by Macrovision Corporation, and is

intended for home and other limited viewing uses only unless otherwise authorized

by Macrovision Corporation. Reverse engineering or disassembly is prohibited.

Operating Your Computer 2-15

 The DVD/Combo/DVD Dual drive is classified as a Class 1 laser product. This label

is located on the DVD/Combo/DVD Dual drive.

Installing the DVD/Combo/DVD Dual Drive

To install the DVD/Combo/DVD Dual drive:

1. Insert the DVD/Combo/DVD Dual drive into the DVD drive bay

located on the right side of the computer.

2. Slide the DVD drive lock/unlock switch to the lock position to secure

the DVD/Combo/DVD Dual drive in place.

DVD drive

2-16 Operating Your Computer

Inserting and Removing a Disc

Follow this procedure to insert or remove a disc.

1. Turn on the computer.

2. Press the eject button and the DVD tray will slide out partially.

Gently pull on it until it is fully extended.

3. To insert a disc, place down the disc in the tray with its label facing

up. Slightly press the center of the tray until it clicks into place.

To remove a disc, hold the disc by its outer edge and lift it up from

the tray.

4. Gently push the tray back into the drive.

NOTE: In the unlikely event that you are unable to release the DVD tray by pressing the

eject button, you can manually release the DVD. (See “DVD/Combo/DVD Dual Drive

Problems” in Chapter 8.)

Eject button In-use

indicator

2-18 Operating Your Computer

NOTES:

 Before using the dual view capability, the video driver supplied with your computer

must be installed.

 System enters Standby/Hibernation mode when the LCD is closed. If you want to

use the computer with the LCD closed, set to the “When I close the lid Do Nothing

of my portable computer” option in the Power Options Properties. Thus the

computer does not enter Standby or Hibernation mode when the LCD is closed.

Configuring the Display Modes

NOTE: To take advantage of the enhanced video capabilities, the video driver supplied

with your computer must be installed.

Your computer has been set to a default resolution and number of colors

before shipment. You can view and change display settings through your

operating system. See your operating system documentation or online

help for specific information.

For displaying in higher resolutions, you can connect an external CRT

monitor that supports higher resolutions. (See “Connecting an External

Monitor” in Chapter 4 for more information.)

The following table lists the display modes supported by your computer.

Display Mode LCD Only CRT Only Simultaneous Display

Resolution Colors

16-bit √ √ √

800×600

32-bit √ √ √

16-bit √ √ √

1024×768

32-bit √ √ √

TABLE NOTES:

 16-bit = High Color or 65,536 (64 K) colors; 32-bit = True Color 16,770,000 (16 M)

colors.

 When using CRT only, the resolution would depend on the supported resolution by

the CRT.

Operating Your Computer 2-19

Using the Audio Features

NOTES:

 To take advantage of the enhanced audio capabilities, the audio driver supplied

with your computer must be installed (see chapter 6 for details).

 If you experience interference while recording, try lowering the microphone

recording volume.

The audio subsystem of your computer features:

 Digital audio and analog mixing functions required for recording and

playing sound on your computer

 Microsoft Windows Sound System support

 A set of speakers ()

 External audio connectors ()

Ways of playing and recording sound vary with the operating system

used. See your operating system documentation or online help for

specific information.

2-20 Operating Your Computer

Connecting Audio Devices

For higher audio quality, you can send or receive sound through external

audio devices.

 Microphone Connector ( ) can be connected to an external

microphone for recording voice or sound.

 Audio Output Connector ( ) can be connected to the line-in

connector of powered speakers with built-in amplifiers, headphones,

or earphone set.

NOTE: When using external speakers/headphones or microphone, you cannot use the

internal one.

Operating Your Computer 2-21

Using the Communication Features

Using the LAN

NOTE for Windows 2000: To take advantage of the LAN feature, the LAN driver

supplied with your computer must be installed.

The internal 10/100Base-T Ethernet LAN (Local Area Network) module

allows you to connect your computer to a network. It supports data

transfer rate up to 100 Mbps.

To connect the network cable to the LAN module, connect one end of the

LAN cable to the RJ-45 connector on the computer and the other end to

the network hub.

Link Indicator Glows green when the system has an available

connection to LAN.

Active Indicator Blinks green when the system is accessing the LAN.

ctive

indicator

Lin

indicato

2-22 Operating Your Computer

Using the Wireless LAN (option)

Depending on your model, an internal Mini PCI wireless LAN (WLAN)

card may have been pre-installed by your computer manufacturer at the

factory. This card allows you to access corporate networks or the Internet

in a wireless environment.

The WLAN features include:

 Peer-to-Peer (Ad-Hoc) and Access Point (Infrastructure) modes

support

 WEP (Wired Equivalent Privacy) 64/128-bit data encryprion

 802.11a+b+g mode

Band Indicates the wireless band of

the current connection

Supported Data rates Rates at which the wireless

adapter can send and receive

data. Displays the speed in

Mbps or the frequency being

used.

• 802.11a-6,9,11,12,18,

24,36,48,and 54

• 802.11b-1,2,5.5, and 11

• 802.11g-1,2,5.5,9,11,

12,18,24,36,48,and 54

Radio Frequency Display the frequency of the

current wireless connection.

• 2.457 GHz

Channel Number Displays the transmit and

receive channel.

Network Authentication Displays Open, Shared

WPA-Enterprise,

WPA-Personal modes.

Dis

s the 802.11

Operating Your Computer 2-23

authentication used by the

currently used profile. Refer

to Security Setting for more

information.

CCX Version Version of the Cisco

Compatible Extensions of

this wireless connection.

CCX TPC Cisco Compatible Extensions

Power Levels.

CCX Power Levels 0.2 0.4,1.0,6.3,100.0 Mw.

Access Point MAC

Address

The Media Access Control

(MAC) address for the

associated access point.

Mandatory Access

Point

Displays “None” if not

enabled. If enabled, the

access point MAC address is

displayed.

This option directs the

wireless adapter to connect to

an access point using a

specific MAC address (48-

12 exadecimal digits, for

example,

00:06:25:0E:9D:84).

Close page.

Displays the help information

for this page.

Close Close p

Help Displays the help information

for this page

To take advantage of the WLAN feature, make sure that the WLAN

driver is installed correctly. (See Chapter 6 for more information.) If your

Specyfikacje produktu

Marka:	Zebra
Kategoria:	laptop
Model:	HK1358A
Kolor produktu:	Srebrny
Wbudowany wyłącznik:	Tak
Częstotliwość wejściowa AC:	50 - 60 Hz
Napięcie wejściowe AC:	110 - 240 V
W zestawie pilot zdalnego sterowania:	Tak
Szerokość opakowania:	1881 mm
Wysokość opakowania:	1040 mm
Głębokość opakowania:	233 mm
Bluetooth:	Tak
Zabezpieczenie przed dziećmi:	Tak
Wbudowane głośniki:	Tak
Ilość głośników:	2
Moc wyjściowa (RMS):	10 W
Typ HD:	4K Ultra HD
Formaty kompresji:	H.265
Długość przekątnej ekranu:	70 "
Obsługiwane typy kart pamięci:	SD
Ilość portów Ethernet LAN (RJ-45):	1
Rozdzielczość:	3840 x 2160 px
Natywne proporcje obrazu:	16:9
Wi-Fi:	Tak
Standardy Wi- Fi:	802.11a,802.11b,802.11g,802.11n
Pobór mocy w trybie czuwania:	- W
Wejscie Audio (L,P):	2
Przewodowa sieć LAN:	Tak
Zintegrowany czytnik kart:	Tak
Kompatybilność 3D:	Tak
Waga wraz z opakowaniem:	48500 g
Ilość portów HDMI:	4
Port RS-232:	1
Technologia wyświetlacza:	LED
Kształt ekranu:	Płaski
Współczynik kontrastu (dynamiczny):	10000000:1
Czas odpowiedzi (typowy):	- ms
Standard VESA:	Tak
Interfejs do montażu panelu:	400 x 400 mm
HDCP:	Tak
Szerokość urządzenia (z podstawą):	1559 mm
Głębokość urządzenia (z podstawą):	350 mm
Wysokość urządzenia (z podstawą):	940 mm
Waga (z podstawą):	38500 g
Szerokość (bez podstawy):	1559 mm
Głębokość (bez podstawy):	69 mm
Wysokość (bez podstawy):	894 mm
Waga (bez podstawy):	37500 g
Jasność:	- cd/m²
Obsługa High Dynamic Range (HDR):	Nie
Obsługiwane rozdzielczości grafiki:	3840 x 2160
Wyjście audio (prawe/lewe):	1
Wyłącznik czasowy:	Tak
Funkcje dotyczące telegazety:	Nie
Typ tunera:	Analogowe i cyfrowe
System formatu sygnału cyfrowego:	ATSC
Telewizja internetowa:	Nie
Smart TV:	Tak
Moc RMS głośnika niskotonowego:	15 W
Zdalne wsparcie smartfona:	Tak
System formatu sygnału analogowego:	NTSC
Miracast:	Tak
Mobile High-Definition Link (MHL):	Tak
Liczba złącz rf:	1
Wejście cyfrowe audio:	1
Tryb gry:	Tak
Audio Return Channel (ARC):	Tak
Języki menu ekranowego:	ENG,ESP,FRE
Typ podświetlenia LED:	Edge-LED
Domyślne ustawienie głośności:	Tak
Wbudowany subwoofer:	Tak
Kontrola rodzicielska:	Tak
Złącze typu RF:	IEC/IFC
Obsługiwane pasma TV:	CATV