Instrukcja obsługi Yamaha Piaggero NP-35

Yamaha klawiatura Piaggero NP-35

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Yamaha Piaggero NP-35 (28 stron) w kategorii klawiatura. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/28

NP-35 NP-15

Owner’s Manual

Before using the instrument, be sure to read “PRECAUTIONS” on pages 2 - 4.

2 NP-35, NP-15 Owner’s Manual

PRECAUTIONS

PLEASE READ CAREFULLY BEFORE PROCEEDING

Especially in the case of children, a guardian should provide guidance on how to properly use ual use.and handle the product before act

Please keep this manual in a safe and handy place for future reference.

• Do not place the power cord near heat sources such as heaters or radiators. Also, do not excessively

bend or otherwise damage the cord, or place heavy objects on it.

• Do not touch the product or the power plug during an electrical storm.

• Use only the correct voltage specified for the product. The required voltage is printed on the name plate

of the product.

• Use only the supplied or the specified AC adaptor (page 23). Do not use the AC adaptor for other

devices.

• Check the power plug periodically and remove any dirt or dust which may have accumulated on it.

• Insert the power plug firmly all the way into the AC outlet. Using the product when it is not plugged in

sufficiently can cause dust to accumulate on the plug, possibly resulting in fire or skin burns.

• When setting up the product, make sure that the AC outlet you are using is easily accessible. If some

trouble or malfunction occurs, immediately turn off the power switch and disconnect the plug from the

outlet. Even when the power switch is turned off, as long as the power cord is not unplugged from the

wall AC outlet, the product will not be disconnected from the power source.

• Do not connect the product to an electrical outlet using a multi-plug outlet extender. Doing so can result

in lower sound quality, or possibly cause overheating in the outlet.

• When disconnecting the power plug, always hold the plug itself and not the cord. Pulling by the cord

can damage it and cause electric shocks or a fire.

• If not using the product for long periods of time, be sure to pull the power plug from the AC outlet.

• This product contains no user-serviceable parts. Do not attempt to disassemble the internal parts or

modify them in any way.

• Do not expose the product to rain, use it near water or in damp or wet conditions, or place on it any

containers (such as vases, bottles or glasses) containing liquids which might spill into any openings

or places where water may drop. A liquid such as water getting into the product may cause a fire, electric

shocks, or malfunctions.

• Use the AC adaptor indoors only. Do not use in any wet environments.

• Never insert or remove a power plug with wet hands.

• Do not place any burning items or open flames near the product, since they may cause a fire.

• Do not dispose of a battery in a fire.

• Do not expose the battery to conditions of extreme low air pressure, cold or heat (such as in direct

sunlight or a fire) or excessive dust or humidity.

Doing so may result in the battery bursting, causing a fire or injury.

• Follow the precautions below. Failure to do so might result in battery fluid leakage. If the contents of

the battery gets on your hands or in your eyes, it can cause blindness, chemical burns, and damage of

the product.

- Use the specified battery type (page 9) only.

- Do not use new batteries together with old ones.

- Do not mix battery types.

- Always make sure all batteries are inserted in conformity with the +/- polarity markings.

- Do not disassemble a battery.

- When the batteries run out, or if the product is not to be used for a long time, remove the batteries

from the product.

- Do not attempt to recharge batteries that are not designed to be charged.

WARNING

Always follow the basic precautions listed below to avoid the possibil , short-circuiting, damity of serious injury or even death from electrical shock ages, fire or other

hazards. These precautions include, but are not limited to, the following:

Power supply

Do not disassemble

Water warning

Fire warning

Batteries

DMI-11 1/3

NP-35, NP-15 Owner’s Manual 3

• If the batteries do leak, avoid contact with the leaked fluid. If the battery fluid should come in contact

with your eyes, mouth, or skin, wash immediately with water and consult a doctor. Battery fluid is

corrosive and may possibly cause loss of sight or chemical burns.

• When using rechargeable batteries, follow the instructions that came with the batteries. Use only the

specified charger device and within the specified charging temperature range when charging.

Charging with an unspecified charger or at a temperature outside the range may cause leakage,

overheating, explosion, or malfunction.

• For battery installation and removal, be sure to read this manual and follow the instructions. Failure to

comply may result in fire, overheating, explosion or malfunction.

• Keep batteries away from children. A child could accidentally swallow a battery. Failure to observe this

may also cause inflammation due to battery fluid leaks.

• Do not subject batteries to mechanical shock. Doing so may cause damage caused by batteries, electric

shock, or malfunction.

• Do not intentionally short the battery. Explosion or liquid leakage may cause fire or injury.

• Do not put batteries in a pocket or bag, or carry or store them together with pieces of metal. Batteries

kept in such condition could short, burst, or leak, causing a fire or injury.

• When storing or discarding batteries, insulate the terminal area by applying tape, or some other

protection. Mixing them with other batteries or metal objects can cause a fire, burns, or inflammation

due to fluid.

• If any of the following problems occur, immediately turn off the power switch and disconnect the power

plug from the outlet. If you are using batteries, remove all batteries from the product. Finally have the

device inspected by Yamaha service personnel.

- The power cord or plug becomes frayed or damaged.

- Unusual smells or smoke are emitted.

- Some object, or water has been dropped into the product.

- There is a sudden loss of sound during use of the product.

- Cracks or other visible damage appear on the product.

• Do not place the product in an unstable position or a location with excessive vibration, where it might

accidentally fall over and cause injury.

• Before moving the product, remove all connected cables, to prevent damage to the cables or injury to

anyone who might trip over them.

• Use only the stand specified for the product. When attaching it, use the provided screws only. Failure

to do so could cause damage to the internal components or result in the product falling over.

• Before connecting the product to other devices, turn off the power for all devices. Before turning the

power on or off for all devices, set all volume levels to minimum.

• Be sure to set the volumes of all devices at their minimum levels and gradually raise the volume controls

while playing the product to set the desired listening level.

• Do not insert foreign materials such as metal or paper into any openings or gaps of the product. Failure

to observe this may cause a fire, electric shocks, or malfunctions.

• Do not rest your weight on, or place heavy objects on the product, and do not use excessive force on

the buttons, switches or connectors.

• Do not use the product or headphones for a long period of time at a high or uncomfortable volume level,

since this can cause permanent hearing loss. If you experience any hearing loss or ringing in the ears,

consult a physician.

• Remove the power plug from the AC outlet before cleaning the unit. Failure to observe this may cause

electric shocks.

Always turn the power off when the product, is not in use.

Even when the [ ] (Standby/On) switch is in standby status (all button lights are off), electricity is still

flowing to the product, at the minimum level.

When you are not using the product, for a long time, make sure you unplug the power cord from the wall

AC outlet.

If you notice any abnormality

CAUTION

Always follow the basic precautions listed below to avoid the possibility of physical injury to you or others, or damage to the instrument or other property. These

precautions include, but are not limited to, the following:

Location

Connections

Handling

Yamaha cannot be held responsible for damage caused by improper use or modifications to the

product, or data that is lost or destroyed.

DMI-11 2/3