Instrukcja obsługi Yamaha NS-F700

Yamaha głośnik NS-F700

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Yamaha NS-F700 (36 stron) w kategorii głośnik. Ta instrukcja była pomocna dla 8 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/36
NS-F700
Speaker
Enceinte
TG
OWNER’S MANUAL
MODE D’EMPLOI
BEDIENUNGSANLEITUNG
MANUAL DE INSTRUCCIONES
i En
Thank you for selecting this YAMAHA product.
Read this before using the speaker.
To assure the finest performance, please read this manual
carefully. Keep it in a safe place for future reference.
Install the speaker in a cool, dry, clean place - away from
windows, heat sources, sources of excessive vibration, dust,
moisture and cold. Avoid sources of electrical noise
(transformers, motors). To prevent fire or electrical shock, do
not expose this unit to rain or water.
To prevent the enclosure from warping or discoloring, do not
place the speaker where it will be exposed to direct sunlight or
excessive humidity.
Do not place the following objects on the speaker:
Glass, china, small metallic etc.
If glass, etc., falls as a result of vibration and breaks, it may
cause personal injury.
A burning candle, etc.
If the candle falls as a result of vibrations, it may cause fire
and personal injury.
A vessel with water in it
If the vessel falls as a result of vibrations and water spills, it
may cause damage to the speaker, and/or you may get an
electric shock.
Do not place the speaker where foreign material such as
dripping water. It might cause fire, damage to this unit, and/or
personal injury.
Do not place the speaker where it is liable to be knocked over
or struck by falling objects. Stable placement will also ensure
better sound performance.
Placing the speaker on the same shelf or rack as the turntable
can result in acoustical feedback.
Never put a hand or a foreign object into the port located on the
rear of the speaker, as this might cause personal injury and/or
damage to the speaker.
When moving the speaker, do not hold the port, as it might
cause personal injury and/or damage to the speaker.
Any time you notice distortion, reduce the volume control on
your amplifier. Never allow your amplifier to be driven into
“clipping.” Otherwise the speaker may be damaged.
When using an amplifier with a rated output power higher than
the nominal input power of the speaker, care should be taken
never to exceed the speaker’s maximum input.
Do not attempt to clean the speaker with chemical solvents, as
this might damage the finish. Use a clean, dry cloth.
Do not attempt to modify or repair the speaker. Contact
qualified YAMAHA service personnel when any service is
needed. The cabinet should never be opened for any reasons.
Secure placement and installation is the owner’s
responsibility. YAMAHA shall not be liable for any
accident caused by improper placement or installation of
speakers.
The speaker is constructed with the majority of the weight located
in its upper portion, and is thus susceptible to falling over if proper
care is not taken to insure its stability. If the speaker falls over, it
may damage the speaker or be the cause of injury (or even death)
to person and/or damage to personal property.
For safe and proper use of the speaker:
Position the speaker in a location that is solid, level, smooth,
and low (with respect to the floor).
Do not push or apply pressure to the side of the speaker when
moving, or lean objects against the side of the speaker.
Do not sit on or set objects on top of the speaker.
Vibrations or jolts associated with earthquakes and other phenomena or
activities may cause the speaker to fall over. For safety reasons, using
commercially available products that increase stability of the speaker is
recommended (metal fittings or chains, etc.).
Use the stands included with the speaker to increase stability:
Be sure to use the stands regardless of where the speaker is
positioned. Attaching the stands included with the speaker
reinforces the base of the speaker so as not to fall over.
Please be cautioned that even though the stands are connected, this
does not guarantee that the speaker will not fall over.
PRECAUTIONS
Information for Users on Collection and Disposal of Old Equipment
This symbol on the products, packaging, and/or
accompanying documents means that used electrical and
electronic products should not be mixed with general
household waste.
For proper treatment, recovery and recycling of old products,
please take them to applicable collection points, in
accordance with your national legislation and the Directives
2002/96/EC.
By disposing of these products correctly, you will help to save
valuable resources and prevent any potential negative effects
on human health and the environment which could otherwise
arise from inappropriate waste handling.
For more information about collection and recycling of old
products, please contact your local municipality, your waste
disposal service or the point of sale where you purchased the
items.
[For business users in the European Union]
If you wish to discard electrical and electronic equipment,
please contact your dealer or supplier for further information.
[Information on Disposal in other Countries outside the
European Union]
This symbol is only valid in the European Union. If you wish
to discard these items, please contact your local authorities or
dealer and ask for the correct method of disposal.
PRECAUTIONS WHEN
POSITIONING THE SPEAKERS
1 En
English
After unpacking, check that the following parts are contained.
When placing the speakers, be sure to use the stands to increase
stability.
Notes
Make sure to have another person support it.
Pay extra attention to avoid scratching on the speaker’s
surface.
Place the speaker on a supporting surface (height of 7 cm
(2-3/4”) or more). Use a blanket or a cushion on it to avoid
scratching.
The provided stands are in two types. Two stands are for the
right side and others are for the left side. Attach each stand
to the proper position on the bottom of the speaker by
following the figure below.
To attach the stands to the speaker, be sure to lay down the
speaker with the side facing up.
Use the 8 specified holes located on the base of the speaker.
Procedure
1Put the 6 mm (1/4”) screw through the large hole in the stand,
and screw it into the speaker at one of the outside holes in the
base of the speaker.
At this time, screw it in loosely so that the stand can still be
moved.
2Put the 4 mm (3/16”) wood screw through the other hole in the
stand, and screw it into the other hole in the base of the
speaker.
3Tighten both of the screws firmly.
4Attach a pad to the bottom of the end portion of the stand.
5Attach the other stands to the other corners of the base of the
speaker in the same way and confirm that all 4 stands have
been firmly attached.
Note
Be carefully not to apply force to the side of the speaker,
otherwise the speaker may fall causing damage to the speaker
or personal injury.
SUPPLIED ACCESSORIES
ATTACHING THE STANDS
(L) Screw
(6mm (1/4”)) × 4
(R)
Stand (R × 2, L × 2)
Wood screw
(4mm (3/16”)) × 4 Pad × 4
Front
(L)(R)
(L) (R)
Back
View from the bottom of the speaker
Pad
Screw (6mm (1/4”))
Wood screw (4mm (3/16”))


Specyfikacje produktu

Marka: Yamaha
Kategoria: głośnik
Model: NS-F700

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Yamaha NS-F700, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje głośnik Yamaha

Instrukcje głośnik

Najnowsze instrukcje dla głośnik