Instrukcja obsługi Yamaha CMA3SW

Yamaha głośnik CMA3SW

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Yamaha CMA3SW (24 stron) w kategorii głośnik. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/24
EnglishDeutschFrançaisEspañol
Português
ItalianoРусский
日本語
JA
ES
ZH
RU
IT
PT
FR
DE
EN
Owner’s Manual
Bedienungsanleitung
Mode d’emploi
Manual de instrucciones
Manual do Proprietário
Manuale di istruzioni
Руководство пользователя
取扱説明書
SPEAKER SYSTEM
V
XS3SB
V
XS3SW
CMA3SB
CMA3SW
SPEAKER ACCESSORY
ֵ
⭞䈪᱄Ҝ
ѣᮽ
2VXS3SB / VXS3SW / CMA3SB / CMA3SW Owner's Manual
PLEASE READ CAREFULLY BEFORE
PROCEEDING
Please keep this manual in a safe place for
future reference.
WARNING
Always follow the basic precautions listed
below to avoid the possibility of serious
injury or even death from electrical shock,
short-circuiting, damages, fire or other
hazards. These precautions include, but are
not limited to, the following:
Do not open
• This device contains no user-serviceable
parts. Do not open the device or attempt
to disassemble the internal parts or modify
them in any way. If it should appear to be
malfunctioning, discontinue use immediately
and have it inspected by qualified Yamaha
service personnel.
Water warning
• Do not expose the device to rain, use it
near water or in damp or wet conditions.
If any liquid such as water seeps into the
device, turn off the power of the amplifier
immediately. Then have the device inspected
by qualified Yamaha service personnel.
Hearing loss
• When turning on the AC power in your audio
system, always turn on the power amplifier
LAST, to avoid hearing loss and speaker
damage. When turning the power off, the
power amplifier should be turned off FIRST
for the same reason.
Fire warning
• Do not place any burning items or open
flames near the device, since they may
cause a fire.
If you notice any abnormality
• If any of the following problems occur,
immediately turn off the power of the
amplifier.
- Unusual smells or smoke are emitted.
- Some object has been dropped into the
device.
- There is a sudden loss of sound during use
of the device.
- Cracks or other visible damage appear on
the device.
Then have the device inspected or repaired
by qualified Yamaha service personnel.
CAUTION
Always follow the basic precautions listed
below to avoid the possibility of physical
injury to you or others, or damage to the
device or other property. These precautions
include, but are not limited to, the following:
Location
• Do not place the device in an unstable
position where it might accidentally fall over
and cause injuries.
• Do not place the device in a location where it
PRECAUTIONS
may come into contact with corrosive gases
or salt air. Doing so may result in malfunction.
• Avoid being near the device during a
disaster, such as an earthquake. Since the
device may fall and cause injury, stay away
from the device quickly and move to a safe
place.
• Before moving the device, remove all
connected cables.
• Be sure to contact a professional installer, if
the speaker installation requires construction
work, and make sure to observe the following
precautions.
- Choose mounting hardware and an
installation location that can support the
weight of the device.
- Avoid locations that are exposed to
constant vibration.
- Use the required tools to install the device.
- Inspect the device periodically.
Connections
• Use only speaker cables for connecting
speakers to the speaker jacks. Use of other
types of cables may result in fire.
Handling caution
• Do not place heavy objects on it. Avoid
applying excessive force to the buttons,
switches or connectors to prevent injuries.
• Do not operate the device if the sound is
distorting. Prolonged use in this condition
could cause overheating and result in fire.
PA-8 1/2
3
VXS3SB / VXS3SW / CMA3SB / CMA3SW Owner's Manual
PRECAUTIONS
• Do not input excessively loud signals that
may result in clipping in the amplifier or
cause the following:
- Feedback, when using a microphone
- Continuous and extremely loud sound from
a musical instrument, etc.
- Continuous and excessively loud distorted
sound
- Noise caused by plugging/unplugging the
cable while the amplifier is turned on
Even if the output power of the amplifier
is lower than the power capacity of this
device (program), damage to the device,
malfunction or fire may occur.
• When choosing a power amplifier for use
with this device, make sure that the output
power of the amplifier is lower than the power
capacity of this device (see Owner’s Manual).
If the output power is higher than the power
capacity, malfunction or fire may occur.
Yamaha cannot be held responsible for
damage caused by improper use or
modifications to the device.
PA-8 2/2
NOTICE
To avoid the possibility of malfunction/ damage
to the product, or damage to other property,
follow the notices below.
Handling and maintenance
When using a high-impedance speaker
connection, make sure the audio signal is
passed through an 60 Hz or above high-pass
filter before being input to the speakers.
Do not install the device to excessive dust or
vibration, or extreme cold or heat (such as in
direct sunlight, near a heater, or in a car during
the day), in order to prevent the possibility
of panel disfiguration, unstable operation, or
damage to the internal components.
Do not place vinyl, plastic or rubber objects on
the device, since this might discolor the device.
When cleaning the device, use a dry and soft
cloth. Do not use paint thinners, solvents,
cleaning fluids, or chemical-impregnated
wiping cloths.
Be sure to observe the amplifier’s rated load
impedance (see Owner’s Manual), particularly
when connecting speakers in parallel.
Connecting an impedance load outside
the amplifier’s rated range can damage the
amplifier.
Protection Circuit
This speaker system has an internal protection
circuit that shuts off the speaker unit when an
excessive input signal is applied. If the speaker
unit emits no sound, reduce the volume level of
the amplifier immediately. The sound will return
automatically in several seconds.
Do not place the speaker face down with the
grille attached, as deformation of the grille may
result.
When placing the speaker face down, always
place it on a flat surface.
Avoid touching or allowing objects to come in
contact with the speaker diaphragms.
Information
About this manual
The illustrations as shown in this manual are for
instructional purposes only.
The company names and product names in
this manual are the trademarks or registered
trademarks of their respective companies.
Regarding disposal
This product contains recyclable components.
When disposing of this product, please contact
the appropriate local authorities.

Specyfikacje produktu

Marka: Yamaha
Kategoria: głośnik
Model: CMA3SW

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Yamaha CMA3SW, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje głośnik Yamaha

Yamaha

Yamaha CMA3SW Instrukcja

9 Stycznia 2025
Yamaha

Yamaha IF2112/64 Instrukcja

9 Stycznia 2025
Yamaha

Yamaha IF2115/99 Instrukcja

9 Stycznia 2025
Yamaha

Yamaha VXC2FB Instrukcja

9 Stycznia 2025
Yamaha

Yamaha VXC6W Instrukcja

9 Stycznia 2025
Yamaha

Yamaha VXC2P Instrukcja

9 Stycznia 2025
Yamaha

Yamaha VXC8-VA Instrukcja

9 Stycznia 2025
Yamaha

Yamaha VC6NB Instrukcja

9 Stycznia 2025
Yamaha

Yamaha IS1218 Instrukcja

9 Stycznia 2025
Yamaha

Yamaha VXS3SW Instrukcja

9 Stycznia 2025

Instrukcje głośnik

Najnowsze instrukcje dla głośnik

Phoenix Gold

Phoenix Gold ZDSKFO2 Instrukcja

9 Stycznia 2025
Phoenix Gold

Phoenix Gold ZDSKPSA2 Instrukcja

9 Stycznia 2025
Phoenix Gold

Phoenix Gold ZP65 Instrukcja

9 Stycznia 2025
Phoenix Gold

Phoenix Gold ZDSKO1 Instrukcja

9 Stycznia 2025
Phoenix Gold

Phoenix Gold ZDSKD1 Instrukcja

9 Stycznia 2025
Phoenix Gold

Phoenix Gold ZX20TC Instrukcja

9 Stycznia 2025
Phoenix Gold

Phoenix Gold ZDSKPSA1 Instrukcja

9 Stycznia 2025
Vonyx

Vonyx VX820 Instrukcja

9 Stycznia 2025
Phoenix Gold

Phoenix Gold ZDSKVW1 Instrukcja

9 Stycznia 2025
Phoenix Gold

Phoenix Gold ZDSKVW2 Instrukcja

9 Stycznia 2025