Instrukcja obsล‚ugi Xaoc Sewastopol II

Xaoc Niesklasyfikowane Sewastopol II

Przeczytaj poniลผej ๐Ÿ“– instrukcjฤ™ obsล‚ugi w jฤ™zyku polskim dla Xaoc Sewastopol II (8 stron) w kategorii Niesklasyfikowane. Ta instrukcja byล‚a pomocna dla 6 osรณb i zostaล‚a oceniona przez 2 uลผytkownikรณw na ล›rednio 4.5 gwiazdek

Strona 1/8
audio port
& voltage
extractor ii
Model of 1948
operatorโ€™s manual rev. 1948/2.0
Thank you for purchasing this Xaoc Devices
product. Sewastopol is a multifunction eu-
rorack module designed for easy interfacing
of external gear to your modular environ-
ment. It can export line and professional lev-
el audio, import audio from instruments and
electroacoustic transducers, and analyze the
incoming audio to generate voltages and
triggers to control your modular system.
This is a second, vastly improved revision to
the original 2014 Sewastopol, featuring a
๎‚…๎‚‘๎‚๎‚’๎‚Ž๎‚‡๎‚–๎‚‡๎‚Ž๎‚›๎€ƒ ๎‚”๎‚‡๎‚†๎‚‡๎‚•๎‚‹๎‚‰๎‚๎‚‡๎‚†๎€ƒ ๎‚’๎‚”๎‚‡๎‚ƒ๎‚๎‚’๎‚Ž๎‚‹๎”๎‚‹๎‚‡๎‚”๎€ƒ ๎‚…๎‚‹๎‚”๎‚…๎‚—๎‚‹๎‚–๎‡ก๎€ƒ
better ergonomics and various other im-
provements.
The module requires 10hp worth of free space
in the eurorack cabinet. The ribbon type pow-
er cable must be plugged into the bus board,
paying close attention to polarity orientation.
The red stripe indicates the negative 12V rail
and is supposed to match a dot, or โ€“12V red
stripe marks on both the unit and the bus
board. The module itself is secured against
reversed power connection, however revers-
ing the 16-pin header may cause serious
damage to other components of your system,
๎‚„๎‚‡๎‚…๎‚ƒ๎‚—๎‚•๎‚‡๎€ƒ๎‚‹๎‚–๎€ƒ๎‚™๎‚‹๎‚Ž๎‚Ž๎€ƒ๎‚•๎‚Š๎‚‘๎‚”๎‚–๎‡ฆ๎‚…๎‚‹๎‚”๎‚…๎‚—๎‚‹๎‚–๎€ƒ๎‚–๎‚Š๎‚‡๎€ƒ๎Žฎ๎ท๎ธ๎€™๎€ƒ๎‚ƒ๎‚๎‚†๎€ƒ๎Žฎ๎ป๎€™๎€ƒ
power rails. The module should be fastened by
mounting the supplied screws before power-
ing up. To better understand the device, we
strongly advise the user to read through the
entire manual before using the module.
Sewastopol consists of four independent
๎‚„๎‚Ž๎‚‘๎‚…๎‚๎‚•๎€ƒ ๎ˆ‹๎‚•๎‚‡๎‚‡๎€ƒ ๎”๎‚‹๎‚‰๎‡ค๎€ƒ ๎ท๎ˆŒ๎‡ฃ๎€ƒ ๎‚‡๎‚š๎‚’๎‚‘๎‚”๎‚–๎€ƒ ๎‚ƒ๎‚–๎‚–๎‚‡๎‚๎‚—๎‚ƒ๎‚–๎‚‘๎‚”๎€ƒ ๎‚ƒ๎‚๎‚†๎€ƒ
symmetrizer ๎‡ก๎€ƒ๎‚‹๎‚๎‚’๎‚‘๎‚”๎‚–๎€ƒ๎‚’๎‚”๎‚‡๎‚ƒ๎‚๎‚’๎‚Ž๎‚‹๎”๎‚‹๎‚‡๎‚”๎€ƒ
, en-
velope follower , and voltage comparator
. These blocks may be used separately, but
they are internally normalled thus offering
a default chain for processing your modu-
lar signals through outboard gear (effects,
stompboxes, signal processors), and then
bringing them back to modular levels and
offering several analysis options. Sewasto-
pol facilitates using your modular system as
a complex effect machine for your external
gear. Its high input impedance and wide gain
range allows weak guitar, microphone, and
๎‚’๎‚‹๎‚‡๎‚œ๎‚‘๎€ƒ ๎‚–๎‚”๎‚ƒ๎‚๎‚•๎‚†๎‚—๎‚…๎‚‡๎‚”๎€ƒ๎‚•๎‚‹๎‚‰๎‚๎‚ƒ๎‚Ž๎‚•๎€ƒ๎‚–๎‚‘๎€ƒ๎‚„๎‚‡๎€ƒ๎‚ƒ๎‚๎‚’๎‚Ž๎‚‹๎”๎‚‹๎‚‡๎‚†๎€ƒ ๎‚—๎‚’๎€ƒ
to modular levels.
The import and export blocks are located in
the lower section of the panel. The outgoing
modular signal should be patched to the
to export jack . It is attenuated by the
corresponding potentiometer and trans-
ferred to the 6.3mm (1/4โ€) TRS balanced
socket labeled The export/fx send.
LED displays the attenuated signal level
and indicates possible clipping. The exter-
nal signal to be introduced to your modular
should be patched to the 6.3mm (1/4โ€) jack
labeled import/fx return. The gain
knob ๎€ƒ ๎‚•๎‚‡๎‚–๎‚•๎€ƒ ๎‚–๎‚Š๎‚‡๎€ƒ ๎‚ƒ๎‚๎‚‘๎‚—๎‚๎‚–๎€ƒ ๎‚‘๎‚ˆ๎€ƒ ๎‚ƒ๎‚๎‚’๎‚Ž๎‚‹๎”๎‚‹๎‚…๎‚ƒ๎‚–๎‚‹๎‚‘๎‚๎€ƒ
over a wide range, while the LED indi-
๎‚…๎‚ƒ๎‚–๎‚‡๎‚•๎€ƒ๎‚’๎‚‘๎‚•๎‚•๎‚‹๎‚„๎‚Ž๎‚‡๎€ƒ ๎‚…๎‚Ž๎‚‹๎‚’๎‚’๎‚‹๎‚๎‚‰๎‡ค๎€ƒ๎€—๎‚Š๎‚‡๎€ƒ๎‚ƒ๎‚๎‚’๎‚Ž๎‚‹๎”๎‚‹๎‚‡๎‚†๎€ƒ ๎‚‹๎‚๎‚’๎‚—๎‚–๎€ƒ
signal is available in the jack imported .
The upper part of the front panel offers con-
trols for the signal analysis blocks. The enve-
lope follower input jack labeled follow
is internally normalled to the output of the
import block, but it allows for directly patch-
ing other signals. Before processing by the
follower, the input signal may be conditioned
๎‚„๎‚›๎€ƒ ๎‚ƒ๎‚๎€ƒ ๎‚‘๎‚’๎‚–๎‚‹๎‚‘๎‚๎‚ƒ๎‚Ž๎€ƒ ๎‚Š๎‚‹๎‚‰๎‚Š๎‚’๎‚ƒ๎‚•๎‚•๎€ƒ ๎”๎‚‹๎‚Ž๎‚–๎‚‡๎‚”๎€ƒ ๎‚•๎‚™๎‚‹๎‚–๎‚…๎‚Š๎‚‡๎‚†๎€ƒ ๎‚„๎‚›๎€ƒ
the toggle labeled low end cut.๎€ƒ๎€—๎‚Š๎‚‡๎€ƒ๎”๎‚‹๎‚Ž-
module
explained
front panel
overview
fig. 1


Specyfikacje produktu

Marka: Xaoc
Kategoria: Niesklasyfikowane
Model: Sewastopol II

Potrzebujesz pomocy?

Jeล›li potrzebujesz pomocy z Xaoc Sewastopol II, zadaj pytanie poniลผej, a inni uลผytkownicy Ci odpowiedzฤ…




Instrukcje Niesklasyfikowane Xaoc

Xaoc

Xaoc Bytom 1981 Instrukcja

8 Stycznia 2025
Xaoc

Xaoc Ustka 1966 Instrukcja

8 Paลบdziernika 2024
Xaoc

Xaoc Sewastopol II Instrukcja

24 Wrzeล›nia 2024
Xaoc

Xaoc Tallin Instrukcja

6 Lipca 2024

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane