Instrukcja obsługi X250 XK Alien Quadcopter

X250 Różnorodny XK Alien Quadcopter

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla X250 XK Alien Quadcopter (8 stron) w kategorii Różnorodny. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/8
CONTENTS OF THE BOX:
• 1 x Quadcopter
• 1 x 2.4 GHz remote (6x AA-batteries not included)
• 1 x 3.7V 780 mAh Li-po battery
• 4 x Spare propeller
• 1 x Charger
• 1 x Manual
SPECIFICATIONS:
• 2.4GHz Assembled quadcopter drone Ready-to-fly
• 6-axis Gyroscope
• 4 main engines
• 1 Li-po Battery 3.7V 780mAh
• Height: 61 mm
• Length: 194 mm
• Width: 194mm
• Weight: 100 g
Specifications
Safety precautions
• Children should only use this model under the supervision of an adult
• Keep hands, face, hair and clothes away from blades.
• Stand out of reach of moving parts of the copter
• Always fly in an open and safe environment where you will not cause any danger to others
• For the remote control, we recommend AA batteries with a voltage of 1.5 to 1.2 volts
• Before each flight, test the distance limit of the transmitter
• Keep these instructions safe
• Always follow local laws and regulations! Contact your reseller when in doubt.
• This model is not suitable for children under 14 years and contains small parts
• After using the copter ALWAYS disconnect the battery and remove it from the device
• Read the manual carefully and completely
• The model and the transmitter must be switched off after use
• For people without experience, we recommend that you learn to fly with an experienced user during your first flights
XK X250 Alien
INSTRUCTION MANUAL
Copyright WLtoys.eu | DroneX BV
The user must return used batteries and rechargeable batteries.
It is forbidden to dispose of used batteries in the bins containing
household waste! Batteries / accumulators containing
hazardous substances are marked with the crossed out wheelie
bin. The symbol indicates that the product should be recycled.
The chemical symbols for the respective hazardous substances
are Cd (cadmium), Hg (mercury), Pb (lead). The used batteries
can be disposed for free of charge at collection points in your
community, stores or wherever batteries are sold. You are kindly
requested to conform to your legal obligations and contribute to
the protection of our environment.
- The battery should not be placed near children (unless you have an adult supervision)
- Touching of damaged batteries can cause injury. If there is contact with skin or eyes, seek medical attention immediately!
- Do not charge directly after the flight or when the battery is warm
- Do not leave charging without supervision
- Always charge the battery to 100%
- Ensure that the battery wires are not in contact to avoid a short-circuit
- The ignition wires of the battery must not be modified or damaged
- Never damage the battery mechanically (this could cause an explosion)
Battery recycling recommendations
- Keep the batteries out of reach of children
- Unequally charged batteries or different battery types should not be used together
- Use recommended batteries or similar
DO NOT FLY:
- Around people or animals
- Around large groups of people
- In limited visibility or dark conditions
- Winds above 2 Beaufort
- Near high voltage pylons and / or other types of cabling
- During thunderstorms, rain or high humidity. The device is not water-resistant.
For the sensitive and rational conservation, protection and improvement of the quality of the environment, protection of human
health and the preservation of natural resources, the user must send an unusable product to relevant facilities created to this
purpose in accordance with the law.
The crossed out wheelie bin means that the product must be recycled (WARNING: do not throw it in your bin).
Li-po Battery instructions
Battery charging
- Non-rechargeable batteries should not be recharged
- The technical design of the battery must not be changed
- After using the product, remove the batteries if you will not use it again for a long period of time
- This model is equipped with a rechargeable Li-po Battery. Li-po batteries require special attention, follow the manual
- The batteries must be charged with the charger supplied by WLtoys
- When charging the battery, always ensure that you do so on a non-combustible surface
- The terminals must not be short-circuited
Copyright WLtoys.eu | DroneX BV
1. Charging wire
2. LED
3. Li-po Battery
Plug the charger into a wall socket and connect the battery to
the charger. This can only be done in one way: by firmly
connecting the charging cable. If the green light is on, the
battery is fully charged and can be disconnected. Then do not
forget to unplug the charger from the wall socket.
Green LED = Charged battery
Orange LED = Charging battery
Red LED = Battery is empty / Charging battery
Input : 220V
Charging Current : 500mA
Full Voltage: 4.2 +/- 0.03V
1: Power LED
2: Short press: Return to home
Long press: Headless mode
3: Speed control
Press: Rudder conversion
4: Throttle trim
5: Yaw trim
6: LCD display
7: Antenna
8: Power switch
9: Short press: Photo
Long press: Video
10: Direction control
Short press: One key rolling
Long press: Lighting control
11: Forwards and backwards trim
12: Crab trim
Activation for the flight
Remote Control / Transmitter
The headless mode means that the quadcopter's direction of flight seen from your viewpoint follows the controls directly, no matter
in which direction the quadcopter is pointing. This is also referred to as 'Care Free' (CF) mode. This is usually done with a digital
compass. So if you press the stick on the RX to the left the quadcopter will fly to the left from your viewpoint. Without headless
mode the quadcopter would fly to the direction which is on the left side of the quadcopter, so if the quadcopter is pointing towards
you it would fly to the right.
1. Put the battery in the drone quadcopter and plug it to the connector of the drone.
2. Move the throttle (left stick in mode 2) down and turn on the remote control. (when beeping follow the activation method
without throttle)
4. Move the throttle up and down, then the indicators light continuously and the connection is established between the drone and
the transmitter.
Warning : Always place the battery on a heat resistant surface and never leave it unattended!
Headless mode
Copyright WLtoys.eu | DroneX BV

Specyfikacje produktu

Marka: X250
Kategoria: Różnorodny
Model: XK Alien Quadcopter

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z X250 XK Alien Quadcopter, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Różnorodny X250

X250

X250 XK Alien Quadcopter Instrukcja

12 Września 2024

Instrukcje Różnorodny

Najnowsze instrukcje dla Różnorodny

Walkera

Walkera Goggle 3 Instrukcja

15 Października 2024
Walkera

Walkera Goggle 4 Instrukcja

15 Października 2024
Somfy

Somfy Telis Lounge Instrukcja

5 Października 2024
Navman

Navman NavBus Instrukcja

5 Października 2024
Trelock

Trelock LS 320 Instrukcja

5 Października 2024
DJI

DJI Phantom 3 Standard Instrukcja

5 Października 2024
Bobike

Bobike Maxi City Instrukcja

5 Października 2024
Tanita

Tanita 1210N Instrukcja

5 Października 2024
Kerbl

Kerbl 81685 Cat flap Instrukcja

5 Października 2024
Tanita

Tanita HC-212F Breath Checker Instrukcja

5 Października 2024