Instrukcja obsługi WyreStorm NHD-100-TX

WyreStorm dekoder cyfrowy NHD-100-TX

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla WyreStorm NHD-100-TX (32 stron) w kategorii dekoder cyfrowy. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/32

WyreStorm HD over IP Solutions

Part Number NHD-000-CTL

NHD-100-TX

NHD-100-RX

HD over IP AV distribution solution

utilising H.264 compression for AV

switching over a LAN

Instruction Manual

Thank you for choosing this WyreStorm product.

Please read these instructions carefully before installing to avoid complications later.

2Technical support: support@wyrestorm.com EMEA/ROW: +44 (0) 1793 230 343

CONTENTS

Contents

1 Introduction

2 Features

3 Safety Precautions

4 In the Box

5 Before Installation

6 Specications

7 Panel Description

8 Connection

9 Typical Application

i. One Encoder to One Decoder

ii. One Encoder to Multiple Decoders

iii. Multiple Encoders to Multiple Decoders

10 Switch Settings and Requirements

11 NHD-000-CTL Browser Conguration & Control

i. Matrix Switching Commands

ii. TX/RX Settings

iii. CTL Settings

12 NetworkHD™ Console Conguration

i. NetworkHD™ Console Software Installation

ii. Searching Devices

iii. Setting Device Parameters

iv. Device Settings

v. Creating Scenes

vi. Conguration File Management

vii. Serial Control

viii. CEC Control

ix. Viewing the Encoders Preview Stream

x. Log

13 Additional Information

14 NetworkHD™ Protocol

15 Troubleshooting

16 FAQ

17 Maintenance

18 Provided Service

19 Mail In Service

20 Warranty

21 Warranty Limits and Exclusions

22 Disclaimer

23 Installation Reference Logs

US/CAN/MEX: +1-518-289-1294 Toll Free Technical Support: +1-844-280-WYRE (9973)

INTRODUCTION, FEATURES AND SAFETY PRECAUTIONS

1. Introduction

WyreStorm® NetworkHD™ 100 is our premier H.264 HD over IP distribution platform. With its simple system conguration

and robust feature set, it provides the best value in networked video distribution, without compromising quality. Enabling

the distribution of HDMI over a dedicated IP network switch for commercial AV applications.

NetworkHD™ 100 facilitates the transmission of an HDMI 1.3 signal (including Full HD 1080p video with 2.1 audio) to any number of

HDMI displays over standard Ethernet (Cat5e/6) infrastructure.

The modular system architecture of NetworkHD™ 100 removes the limitations of a traditional xed platform I/O matrix system without

compromising quality or reliability, whilst oering signicant cost savings when designing large scale installations. Adding encoders and

decoders as required enables the system to grow with the needs of the application.

NetworkHD™ 100 uses multiple technologies to automatically congure and discover system components, making setup a breeze.

Functioning on 10/100 or Gigabit Layer2 SMART switches, NetworkHD™ 100 does not require advanced integrator network experience

to install, nor does it require complicated VLAN congurations or PC software, making it one of the simplest HD over IP systems

available. Conguring network switches takes minutes through your browser and even the largest distributions can be quickly and easily

congured and expanded.

The NHD-000-CTL controller creates a simple, single interface to congure, manage and control the entire NetworkHD™ 100 system,

whilst capable of integrating with leading control brands including WyreStorm Enado™ for the highest quality total HD distribution and

control solution over a network.

For further information on this product and other WyreStorm ranges, visit our website or download our latest product guide at

wyrestorm.com

2. Features

• Highly scalable, visually lossless HD over IP solution using the most ecient compression technology to allow for very large

commercial AV deployments

• Plug and Play setup with automatic networking conguration and auto discovery of components

• Quick Sync™ technology for virtually instantaneous, seamless switching

• CEC One-Touch Play & Standby or RS-232 control of connected displays

• Supports video previewing on a PC or third party device. NetworkHD™ 100 outputs simultaneous IP streams. One full resolution for

the NHD-100-RX. The other small one supports resolutions of 352 x 288 @ 5Hz to easily preview a video from the encoder on a

PC or Mac

• Use with the new NHD-000-CTL controller for simple conguration and control via the LAN, as well as for allowing control from

third party control system such as AMX, Crestron, Control4, RTI & WyreStorm™ Enado.

• Supports PoE to enable remote powering from POE network switches, eliminating the need for a nearby power outlet

• Full PC control suite available free of charge at wyrestorm.com

• Supports HDCP

• Congurable encoding bit rate up to 40 Mbps

3. Safety Precautions

WARNING

To reduce the risk of re, electric shock

or product damage:

1. Ventilation is crucial to consistent operation of this product. Units should be mounted with at least (2.5cm) 1 inch clearance of

vents. WyreStorm highly recommends the use of the NHD-000-RACK for absolute correct mounting best practice.

2. Do not expose this apparatus to rain, moisture, sprays, drips or splashes and ensure that no objects containing liquids are placed

on the apparatus, including cups, glasses and vases.

3. Do not place this unit in a conned space such as enclosed shelving, cabinets or bookshelves. Ensure the unit is adequately

ventilated.

Specyfikacje produktu

Marka:	WyreStorm
Kategoria:	dekoder cyfrowy
Model:	NHD-100-TX
Kolor produktu:	Czarny
Wysokość produktu:	25 mm
Szerokość produktu:	200 mm
Głębokość produktu:	94 mm
Waga produktu:	480 g
Podręcznik użytkownika:	Tak
Gniazdko wyjścia DC:	Tak
Maksymalne zużycie mocy:	6 W
Zasilacz sieciowy:	Tak
Liczba kanałów:	1 kan.
Ilość portów Ethernet LAN (RJ-45):	1
Zakres temperatur (eksploatacja):	0 - 45 °C
Zakres wilgotności względnej:	10 - 90 %
Obsługiwane formaty plików wideo:	AVC, H.264, MPEG4
Diody LED:	Tak
Zakres temperatur (przechowywanie):	-20 - 70 °C
Dopuszczalna wilgotność względna:	10 - 90 %
Port RS-232:	1
Obsługiwane rozdzielczości grafiki:	640 x 480 (VGA),800 x 600 (SVGA),1024 x 768 (XGA),1280 x 1024 (SXGA),1280 x 800 (WXGA),1366 x 768,1400 x 1050 (SXGA+),1400 x 900,1680 x 1050 (WSXGA+),1920 x 1080 (HD 1080)
Maksymalna rozdzielczość filmu:	1920 x 1200 px