Instrukcja obsługi WowWee Groove Cube

WowWee Kołyska/stacja dokująca Groove Cube

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla WowWee Groove Cube (2 stron) w kategorii Kołyska/stacja dokująca. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/2
INSTRUCTION MANUAL
EASY OPERATION
Groove Cube™ ShutterMicro USB Cable
1. Push Button: Power/Play/Pause/Answer Calls
● Press and hold the Push Button to power On/Off.
● Press the button to Pause when music is playing.
● Press the button to answer incoming calls when the device is paired with a phone.
Press again to end call.
2. Remote Shutter Button
● Activate the device’s camera. Press the Remote Shutter Button (2) to take pictures.
NOTE: Ensure Bluetooth® is connected. Can be activated whilst music is playing.
3. Bluetooth ® Indicator Light:
● Rapid Flashing (2/s) Green LED light indicates that the speaker is in Bluetooth®
Searching and Pairing Mode.
● Slow Flashing (1/s) Green LED light indicates that the phone is successfully paired.
Pairing:
● Press and Hold the Push Button until you hear the start-up chime. The Green LED
light will be ashing rapidly.
● Switch on your Bluetooth® smart-device/phone and wait until ‘GC Shutter’ shows up
on your screen. When ‘GC Shutter’ appears on your device, select and pair with the
speaker.
● When the pairing is complete, you will hear a message and the Green LED light will
ash slowly.
Power On\Off:
Power ON: Press the Power Button (1) and hold until a beeping sound is heard and
the Green light ashes quickly.
To turn OFF: Press the Power Button and hold, “Power Off” will sound and the Green
light will switch off.
Note: It is strongly recommended that you turn off the speaker whilst not in use.
Bluetooth® Smart-Device/Phone Pairing:
Please ensure the device to which you are pairing with
has Bluetooth® capabilities.
Note: Some mobile phones or other devices may pair
automatically when re-started.
1. Make sure that the speaker is turned off.
2. Place the speaker and the device in proximity so that
both devices are in view.
3. Press and hold the Power Button until speaker power
is ON. A Green LED light willash rapidly.
4. To active the Bluetooth® mode and functions on your
phone or device, see the instructions for that device.
5. Set the phone or device to search for Bluetooth®
devices and select the speaker.
6. When the pairing is complete, the Green LED light
will ash slowly. The speaker is now ready for
listening to music, answering calls, or taking pictures.
1
7
6
8
4
3
2
5
Charging:
• Fully charge the speaker prior to rst use.
• Plug the Micro USB cable into the USB ports.
• The Red LED light will turn on to indicate the
device is charging.
• The Red LED light switching off indicates that
charging is complete.
Lanyard
Contents: 1 x Groove Cube™ Shutter; 1 x USB Cable; 1 x Lanyard; 1 x Instruction Manual
The Groove Cube™ Shutter mini Bluetooth®
speaker is small in size, but a powerful multi-functional device. It supports Bluetooth ® music playing, Bluetooth®
handsfree phone call functions, Remote Shutter Button for your smart device’s camera and comes with a lanyard and jack pin to attach to your device.
Features
● Size 26.8 x 26.8 x 28.5mm [1.05 x 1.05 x 1.12 inches] • Bluetooth
® handsfree phone call functions Lanyard and jack pin to attach to device ●
● Bluetooth®
music playing • Bluetooth® Remote Shutter Button
Manufactured and distributed by
© 2014 WowWee Group Limited.
All Rights Reserved.
WowWee Group Limited. Energy Plaza, 301A-C, 92 Granville Road
T.S.T. East, Hong Kong
WowWee Canada Inc. 3700 Saint-Patrick Street, Unit 206, Montreal
QC H4E 1A2, Canada
Customer Service: www.wowweezone.com
Assortment No.: 1440/1450
4. Charge Indicator Light
● Constant Red LED light whilst the device is charging.
● The indicator light will switch off when fully charged.
5. Microphone
6. Lanyard Hole
7. Micro USB Port (Power Input)
8. Speaker
TROUBLESHOOTING
Manufactured and distributed by © 2014 WowWee
Group Limited. Product names, designations, and
logos are trademarks or registered trademarks of
WowWee Group Limited.All rights reserved.
Customer Service Website:
www.wowweezone.com
We recommend that you retain our address for
future reference.
Product and colors may vary.
Packaging printed in China.
MADE IN CHINA.
CAUTION
Changes or modications not expressly approved
by the party responsible for compliance could void
the user’s authority to operate the equipment.
For these purposes, the party responsible is:
WowWee USA Inc.
875 Prospect Street
Suite 204A
La Jolla, CA 92037
1-800-310-3033
NOTE
This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to
part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications.
However, there is no guarantee that interference will not occur in a particular Installation. If this equipment
does cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try and correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and receiver
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected
• Consult the dealer or experienced radio/TV technician for help
This Device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause
undesired operation.
This device complies with Industry Canada Licence-exempt RSS-210. Operation is subject to the following
two conditions:
(1) This device may not cause interference, and
(2) This device must accept any interference, including interference that may cause undesired
operation of the device.
Specications:
● Rated Power 2W
• Frequency Response 180HZ-16KHZ
• Distortion Factor THD<1%
• Signal to Noise Ratio: S/N≥90DB
• Separation ≥55DB
• Speaker 23mm; 4Ω 2W
• Battery Rechargeable
Lithium-Polymer
3.7V/180mAh
No Sound:
● Make sure that the music player is working and
that the speaker is charged.
• Make sure Bluetooth® is paired with the correct
speaker.
Not Charging:
● Check to make sure that you are using the correct
cable and that it is fully plugged into both the
device and the USB port that you are charging
from. Also check to make sure the source is
turned on.
Precautions:
● Do not submerge the product in water.
● Keep speaker away from water and moisture - do not get it wet.
● Keep speaker away from any heat source.
● Adjust volume to avoid damaging your hearing.
● Store and use in normal environments. Exposure to extreme elements such as re,
water, or other extreme elements may damage the unit. Do not handle with wet hands.
● Keep debris or other items from blocking the speakers or from entering any of the
ports.
● Do not attempt to open or take apart this speaker. The speaker will be damaged during
that process.
● If the speaker quality deteriorates, or a slight ‘popping noise’ is heard, it may be due to
low battery. Please recharge the speaker.
● Only use a computer USB or the DC 5V power matching the Micro USB Cable
(included) to charge.
● Do not attempt to open or take apart this speaker. This unit has no user serviceable
parts.
● Do not put any foreign objects in the USB port.
● Charge the battery in an isolated area and keep away from ammable material.
● Do not expose product to direct sunlight as it may result in a risk of battery exploding,
overheating, or igniting.
● Do not disassemble, modify, short circuit or heat the battery.
● Do not place it in re or leave in a hot place.
● Only charge the battery with the specied USB cable.
● In the unlikely event of leakage or explosion, use sand or a chemical re extinguisher to
extinguish.
● LiPo Battery must be recycled or disposed of properly.
● The Micro USB cable is tailor-made for the LiPo rechargeable battery used in your
Groove Cube™ Shutter. Do not use it to charge any item other than the Groove Cube™
Shutter.
WARNING! This equipment may experience difculty and/or memory loss when subjected to any electrostatic discharge, radio frequency
interference, or sudden power surge/interruption. The user is encouraged to reset the equipment should any of these occur.
1440US03CBF_IML

Specyfikacje produktu

Marka: WowWee
Kategoria: Kołyska/stacja dokująca
Model: Groove Cube

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z WowWee Groove Cube, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Kołyska/stacja dokująca WowWee

WowWee

WowWee Groove Cube Instrukcja

10 Września 2024

Instrukcje Kołyska/stacja dokująca

Najnowsze instrukcje dla Kołyska/stacja dokująca

Vorago

Vorago KSP-600 Instrukcja

9 Października 2024
Gembird

Gembird DD-U3M2 Instrukcja

9 Października 2024
Urban Factory

Urban Factory HCS02UF Instrukcja

9 Października 2024
Urban Factory

Urban Factory HCS01UF Instrukcja

9 Października 2024
Urban Factory

Urban Factory HCS04UF Instrukcja

9 Października 2024
Urban Factory

Urban Factory HCS03UF Instrukcja

9 Października 2024
Bose

Bose SoundLink Flex 2nd Gen Instrukcja

9 Października 2024
StarTech.com

StarTech.com UNIDOCK3UEU Instrukcja

9 Października 2024
StarTech.com

StarTech.com SATDOCKU2EGB Instrukcja

9 Października 2024
StarTech.com

StarTech.com SATDOCKU3FGB Instrukcja

9 Października 2024