Instrukcja obsługi Worx WX820L.9

Worx Narzędzie wielofunkcyjne WX820L.9

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Worx WX820L.9 (32 stron) w kategorii Narzędzie wielofunkcyjne. Ta instrukcja była pomocna dla 7 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/32
5-in-1 Multi Sander EN
Multiponceuse 5 en 1 F
Lijadora multifunción 5 en 1 ES
P03
P16
P24
3
WARNING: Some dust created by power
sanding, sawing, grinding, drilling
and other construct ion activities contains
chemicals known to the State of California
to cause cancer, birt h defects or other
reproductive harm. Some examples of these
chemicals are:
• Lead from lead-based pain ts;
• Crystalline silica from bricks and cement
and other masonry products;
• Arsenic and chromium from chemically-
treated lumber.
Your risk from these exposures varies,
depending on how often you do this type
of work. To reduce your exposure to these
chemicals: work in a well ventilated area,
and work with approved safet y equipment,
such as those dust masks that are specially
designed to filter out microscopic particles.
WARNIN G: This product can expose
you to chemicals including lead, phthalate
or bisphenol A which are known to the State of
California to cause cancer, birth defects or other
reproductive harm. Wash your hands after use.
For more information go to
www.P65Warnings.ca.gov.
WARNING: Read all safety warnings,
instructions, illustrat ions and
specifications provided with this power tool.
Failure to follow all instructions listed below may
result in electric shock, fire and /or serious injury.
Save all warnings and instruct ions for future
reference.
The term “power tool” in the warnings refers
to your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
1. Work area safety
a) Keep work area clean and well lit .
Cluttered or dark areas invite accidents.
b) Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust.
Power
tools create sparks which may ignite the dust
or fumes.
c) Keep children and bystanders away while
operating a power tool.
Distractions can
cause you to lose control.
2. Electrical safety
a) Power tool plugs must mat ch the outlet.
Never modify the plug in any way. Do
not use any adapter plugs with earthed
(grounded) power tools.
Unmodified plugs
and matching outlets will reduce risk of electric
shock.
b) Avoid body contact with eart hed or
grounded surfaces, such as pipes,
radiators, ranges and refrigerators.
There
is an increased risk of electric shock if your
body is earthed or grounded
.
c) Do not expose power tools to rain or wet
conditions.
Water entering a power tool will
increase the risk of electric shock.
d) Do not abuse the cord. Never use the
cord for carrying, pulling or unplugging
the power tool. Keep cord away from
heat, oil, sharp edges or moving parts.
Damaged or entangled cords increase the risk
of electric shock.
e) When operating a power tool outdoors,
use an extension cord suitable for
outdoor use.
Use of a cord suitable for
outdoor use reduces the risk of electric shock.
f) If operating a power tool in a damp
location is unavoidable, use a residual
current device (RCD) protected supply.
Use of an RCD reduces the risk of electric
shock.
3) Personal safety
a) Stay alert, watch what you are doing
and use common sense when operating
a power tool. Do not use a power tool
while you are tired or under the influence
of drugs, alcohol or medication.
A moment
of inattention while operating power tools may
result in serious personal injury.
b) Use personal protective equipment .
Always wear eye protection.
Protective
equipment such as dust mask, non-skid safety
shoes, hard hat, or hearing protection used for
appropriate conditions will reduce personal
injuries.
c) Prevent unintentional starting. Ensure
the switch is in the off-posit ion before
connecting to power source and/or
battery pack, picking up or carrying the
tool.
Carrying power tools with your finger on
the switch or energising power tools that have
the switch on invites accidents.
d) Remove any adjusting key or wrench
before turning the power tool on.
A
wrench or a key left attached to a rotating part
of the power tool may result in personal injury.
e) Do not overreach. Keep proper footing
and balance at all t imes.
This enables
better control of the power tool in unexpected
situations.
f) Dress properly. Do not wear loose
clothing or jewelry. Keep your hair and
clothing away from moving parts.
Loose
clothes, jewelry or long hair can be caught in
moving parts.
g) If devices are provided for the

Specyfikacje produktu

Marka: Worx
Kategoria: Narzędzie wielofunkcyjne
Model: WX820L.9

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Worx WX820L.9, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Narzędzie wielofunkcyjne Worx

Worx

Worx WX822L Instrukcja

8 Października 2024
Worx

Worx WX696L.1 Instrukcja

4 Października 2024
Worx

Worx WX822L.9 Instrukcja

16 Września 2024
Worx

Worx WX686L Instrukcja

3 Września 2024
Worx

Worx Sonicrafter WX671.6 Instrukcja

31 Sierpnia 2024
Worx

Worx WX679 Instrukcja

30 Sierpnia 2024
Worx

Worx Sonicrafter WX671.3 Instrukcja

29 Sierpnia 2024
Worx

Worx WX820L.9 Instrukcja

28 Sierpnia 2024
Worx

Worx Sonicrafter WX671.5 Instrukcja

25 Sierpnia 2024
Worx

Worx WX677 Instrukcja

23 Sierpnia 2024

Instrukcje Narzędzie wielofunkcyjne

Najnowsze instrukcje dla Narzędzie wielofunkcyjne

Black & Decker

Black & Decker MT18 Instrukcja

11 Stycznia 2025
Vonroc

Vonroc OT505DC Instrukcja

9 Stycznia 2025
Workzone

Workzone WZMS 10,8 Li Instrukcja

31 Grudnia 2025
Einhell

Einhell TE-MG 18/1 Li Instrukcja

30 Grudnia 2025
EGO

EGO MRC2306E Instrukcja

28 Grudnia 2024
Powerblade

Powerblade PC4MT5 Instrukcja

10 Grudnia 2024
EGO

EGO PH1420E Instrukcja

8 Grudnia 2024
Parkside

Parkside PAMFW 20-Li A1 Instrukcja

15 Października 2024
Güde

Güde GGF 620 Instrukcja

14 Października 2024
Makita

Makita DTM52Z Instrukcja

9 Października 2024