Instrukcja obsługi Worx WX687L

Worx Narzędzie wielofunkcyjne WX687L

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Worx WX687L (20 stron) w kategorii Narzędzie wielofunkcyjne. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/20

Oscillating Tool EN

Oscillant Outil F

Oscilante Herramienta ES

P02

P08

P14

PRODUCT SAFETY

WARNING: Some dust created by power

sanding, sawing, grinding, drilling and other

construction activities contains chemicals known to

the State of California to cause cancer, birth defects

or other reproductive harm. Some examples of these

chemicals are:

• Lead from lead-based paints;

• Crystalline silica from bricks and cement and

other masonry products ;

• Arsenic and chromium from

chemically-treated lumber.

Your risk from these exposures varies, depending on

how often you do this type of work. To reduce your

exposure to these chemicals, work in a well ventilated

area, and work with approved safety equipment, such

as those dust masks that are specially designed to

filter out microscopic particles.

WARNING: This product can expose you to

chemicals including lead and Di(2-ethylhexyl)

phthalate (DEHP) which are known to the State of

California to cause cancer and birth defects or other

reproductive harm. For more information go to www.

P65Warnings.ca.gov.

GENERAL POWER TOOL

SAFETY WARNINGS

WARNING: Read all safety warnings,

instructions, illustrations and specifications

provided with this power tool. Failure to follow the

warnings and instructions may result in electric shock,

fire and/or serious injury.

Save all warnings and instructions for future

reference.

The term power tool in the warnings refers to your

electric (corded) power tool or

battery-operated (cordless) power tool.

1 WORK AREA SAFETY

a) Keep work area clean and well lit. Cluttered or

dark areas invite accidents.

b) Do not operate power tools in explosive

atmospheres, such as in the presence of

flammable liquids, gases or dust. Power tools create

sparks which may ignite the dust or fumes.

c) Keep children and bystanders away while

operating a power tool. Distractions can cause you to

lose control.

2) ELECTRICAL SAFETY

a) Power tool plugs must match the outlet. Never

modify the plug in any way. Do not use any adapter

plugs with earthed (grounded) power tools.

Unmodified plugs and matching outlets will reduce risk

of electric shock.

b) Avoid body contact with earthed or grounded

surfaces, such as pipes, radiators, ranges and

refrigerators. There is an increased risk of electric

shock if your body is earthed or grounded.

c) Do not expose power tools to rain or wet

conditions. Water entering a power tool will increase

the risk of electric shock.

d) Do not abuse the cord. Never use the cord for

carrying, pulling or unplugging the power tool.

Keep cord away from heat, oil, sharp edges or

moving parts. Damaged or entangled cords increase

the risk of electric shock.

e) When operating a power tool outdoors, use an

extension cord suitable for outdoor use. Use of a

cord suitable for outdoor use reduces the risk of electric

shock.

f) If operating a power tool in a damp location is

unavoidable, use a residual current device (RCD)

protected supply. Use of an RCD reduces the risk of

electric shock.

3) PERSONAL SAFETY

a) Stay alert, watch what you are doing and use

common sense when operating a power tool. Do

not use a power tool while you are tired or under

the influence of drugs, alcohol or medication. A

moment of inattention while operating power tools may

result in serious personal injury.

b) Use personal protective equipment. Always wear

eye protection. Protective equipment such as dust

mask, non-skid safety shoes, hard hat, or hearing

protection used for appropriate conditions will reduce

personal injuries.

c) Prevent unintentional starting. Ensure the switch

is in the off-position before connecting to power

source and/or battery pack, picking up or carrying

the tool. Carrying power tools with your finger on the

switch or energizing power tools that have the switch on

invites accidents.

d) Remove any adjusting key or wrench before

turning the power tool on. A wrench or a key left

attached to a rotating part of the power tool may result

in personal injury.

e) Do not overreach. Keep proper footing and balance

at all times. This enables better control of the power

tool in unexpected situations.

f) Dress properly. Do not wear loose clothing or

jewelry. Keep your hair and clothing away from

moving parts. Loose clothes, jewelry or long hair can

be caught in moving parts.

g) If devices are provided for the connection of dust

extraction and collection facilities, ensure these

are connected and properly used. Use of dust

collection can reduce dust-related hazards.

h) Do not let familiarity gained from frequent use of

tools allow you to become complacent and ignore

tool safety principles. A careless action can cause

severe injury within a fraction of a second.

4) POWER TOOL USE AND CARE

a) Do not force the power tool. Use the correct power

tool for your application. The correct power tool will

do the job better and safer at the rate for which it was

designed.

b) Do not use the power tool if the switch does not

turn it on and off. Any power tool that cannot be

controlled with the switch is dangerous and must be

repaired.

c) Disconnect the plug from the power source and/

or remove the battery pack, if detachable, from

the power tool before making any adjustments,

changing accessories, or storing power tools. Such

preventive safety measures reduce the risk of starting

the power tool accidentally.

d) Store idle power tools out of the reach of children

and do not allow persons unfamiliar with the

power tool or these instructions to operate the

power tool. Power tools are dangerous in the hands

of untrained users.

e) Maintain power tools and accessories. Check

for misalignment or binding of moving parts,

breakage of parts and any other condition

that may affect the power tool’s operation.

If damaged, have the power tool repaired

before use. Many accidents are caused by poorly

maintained power tools.

f) Keep cutting tools sharp and clean. Properly

maintained cutting tools with sharp cutting edges are

less likely to bind and are easier to control.

g) Use the power tool, accessories and tool bits etc.

in accordance with these instructions, taking

into account the working conditions and the

work to be performed. Use of the power tool for

operations different from those intended could result

in a hazardous situation.

h) Keep handles and grasping surfaces dry, clean

and free from oil and grease. Slippery handles and

grasping surfaces do not allow for safe handling and

control of the tool in unexpected situations.

5) SERVICE

a) Have your power tool serviced by a qualified

repair person using only identical replacement

parts. This will ensure that the safety of the power

tool is maintained.

SAFETY INSTRUCTION FOR

CUTTING

1. Hold power tool by insulated gripping surfaces,

when performing an operation where the

cutting accessory may contact hidden wiring or

its own cord.Cutting accessory contacting a “live”

wire may make exposed metal parts of the power tool

“live” and could give the operator an electric shock.

2. Use clamps or another practical way to secure

and support the workpiece to a stable platform.

Holding the work by hand or against your body leaves

it unstable and may lead to loss of control.

SYMBOLS

To reduce the risk of injury, user must

read instruction manual

Warning

Wear ear protection

Wear eye protection

Wear dust mask

Double insulation

Make sure the tool is

unplugged prior to changing acces-

sories.

Before working with your tool make

sure that no power cords will be dam-

aged.

Avoid danger of injury from the sharp

edges of the accessories.

Accessories can become very hot while

working, presenting danger of burns!

Wear protective gloves

High oscillation frequency.

Low oscillation frequency.

Unlock

Specyfikacje produktu

Marka:	Worx
Kategoria:	Narzędzie wielofunkcyjne
Model:	WX687L
Kolor produktu:	Biały
Typ kontroli:	Dotyk
Wbudowany wyświetlacz:	Tak
Długość przewodu:	2.4 m
Typ wyświetlacza:	LED
Położenie urządzenia:	Wbudowany
Częstotliwość wejściowa AC:	50 Hz
Napięcie wejściowe AC:	230-240 V
Wysokość produktu:	1772 mm
Szerokość produktu:	548 mm
Głębokość produktu:	549 mm
Waga produktu:	54000 g
Szerokość opakowania:	590 mm
Wysokość opakowania:	1840 mm
Głębokość opakowania:	600 mm
Poziom hałasu:	35 dB
Prąd:	13 A
Regulowane nóżki:	Nie
Zabezpieczenie przed dziećmi:	Nie
Kraj pochodzenia:	Włochy
Klasa efektywności energetycznej (stara):	A+
Zawias drzwiczek:	Prawy
Wi-Fi:	Nie
Waga wraz z opakowaniem:	56000 g
Typ lamp:	LED
Roczne zużycie energii:	291 kWh
Dwustronne drzwi:	Tak
Pojemność netto:	267 l
Pojemność lodówki netto:	195 l
Zakres regulacji temperatury w lodówce:	2 - 8 °C
Tworzywo półek:	Szkło
Minimalna temperatura pracy:	-24 °C
Maksymalna temperatura eksploatacji:	8 °C
Pojemność brutto:	272 l
Światło wewnątrz lodówki:	Tak
Automatyczne rozmrażanie (lodówka):	Tak
System Multi-Airflow (lodówka):	Nie
Liczba półek w lodówce:	4
Liczba pojemników na warzywa:	2
Przegródki na drzwiach lodówki:	4
Funkcja Super Cool:	Nie
Pojemność lodówki brutto:	199 l
Pozycja zamrażarki:	Umieszczony w części dolnej
Pojemność zamrażarki netto:	72 l
Czas przechowywania podczas awarii zasilania:	21 h
Pojemność zamrażarki brutto:	73 l
Liczba półek w zamrażarce:	2
Funcja szybkiego zamrażania:	Tak
Alarm temperatury:	Nie
Alarm przy otwiertych drzwiach:	Nie
Maszyna do lodu:	Nie
Tryb klimatu:	SN-N
No Frost (lodówka):	Tak
Pojemnik na jajka:	Tak
No Frost (zamrażarka):	Nie
Palety na kostki lodu:	Tak
Liczba kompresorów:	1
Funkcja urlopu:	Nie
Dozownik wody:	Nie
Liczba półek na jajka:	1
Światło wewnątrz zamrażarki:	Nie
Montaż drzwi:	Samozamykacz do drzwi
Funkcja nawilżacza:	Nie
Panel drzwi w komplecie:	Nie
Temperatura zamrażarnika (min):	-18 °C
System Multi-Airflow (zamrażarka):	Nie
Komora antybakteryjna:	Nie
Komora środkowa:	Nie