Instrukcja obsługi Worx WX130L.9

Worx Wiertarka WX130L.9

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Worx WX130L.9 (32 stron) w kategorii Wiertarka. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/32
WX130L WX130L.X
20V Cordless Sub Compact Brushless Drill Driver
Perceuse-visseuse compacte à moteur sans balais et sans l 20 V
Taladro destornilladorinalámbrico subcompacto de 20V sin escobillas
P03
P14
P21
EN
F
ES
20V Cordless Sub Compact Brushless Drill Driver
EN
3
TABLE OF CONTENTS
1. PRODUCT SAFETY
2. COMPONENT LIST
3. TECHNICAL DATA
4. INTENDED USE
5. OPERATION INSTRUCTIONS
6. PROBLEM SOLUTION
7. MAINTENANCE
1.PRODUCT SAFETY
WARNING: Some dust created by power
sanding, sawing, grinding, drilling and other
construction activities contains chemicals known to
the State of California to cause cancer, birth defects
or other reproductive harm. Some examples of
these chemicals are:
• Lead from lead-based paints;
• Crystalline silica from bricks and cement and
other masonry products;
• Arsenic and chromium from chemically-treated
lumber.
Your risk from these exposures varies, depending
on how often you do this type of work. To reduce
your exposure to these chemicals: work in a well
ventilated area, and work with approved safety
equipment, such as those dust masks that are
specially designed to lter out microscopic
particles.
WARNING: This product can expose you to
chemicals including lead and Di(2-ethylhexyl)
phthalate (DEHP) which are known to the State of
California to cause cancer and birth defects or other
reproductive harm. For more information go to
www.P65Warnings.ca.gov .
GENERAL POWER TOOL SAFETY WARNINGS
WARNING: Read all safety warnings,
instructions, illustrations and specications
provided with this power tool. Failure to follow all
instructions listed below may result in electric shock,
re and/or serious injury.
Save all warnings and instructions for future
reference.
The term “power tool” in the warnings refers to your
mains-operated (corded) power tool or battery-
operated (cordless) power tool.
1) Work area safety
a) Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
b) Do not operate power tools in explosive
atmospheres, such as in the presence of
ammable liquids, gases or dust. Power tools
create sparks which may ignite the dust or
fumes.
c) Keep children and bystanders away while
operating a power tool. Distractions can cause
you to lose control.
2) Electrical safety
a) Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodied plugs and matching outlets
will reduce risk of electric shock.
b) Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges
and refrigerators. There is an increased risk
of electric shock if your body is earthed or
grounded.
c) Do not expose power tools to rain or wet
conditions. Water entering a power tool will
increase the risk of electric shock.
d) Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges
or moving parts. Damaged or entangled cords
increase the risk of electric shock.
e) When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of
a cord suitable for outdoor use reduces the risk
of electric shock.
f) If operating a power tool in a damp location
is unavoidable, use a residual current device
(RCD) protected supply. Use of an RCD reduces
the risk of electric shock.
3) Personal safety
a) Stay alert, watch what you are doing and use
common sense when operating a power tool.
Do not use a power tool while you are tired
or under the inuence of drugs, alcohol or
medication. A moment of inattention while
operating power tools may result in serious
personal injury.
b) Use personal protective equipment. Always
wear eye protection. Protective equipment
such as dust mask, non-skid safety shoes, hard
hat, or hearing protection used for appropriate
conditions will reduce personal injuries.
c) Prevent unintentional starting. Ensure the
switch is in the off-position before connecting
to power source and/or battery pack, picking up
or carrying the tool. Carrying power tools with
your nger on the switch or energising power
tools that have the switch on invites accidents.
d) Remove any adjusting key or wrench before
turning the power tool on. A wrench or a key left
attached to a rotating part of the power tool may

Specyfikacje produktu

Marka: Worx
Kategoria: Wiertarka
Model: WX130L.9

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Worx WX130L.9, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Wiertarka Worx

Worx

Worx WX130L.9 Instrukcja

25 Lutego 2025
Worx

Worx WX956L Instrukcja

4 Grudnia 2024
Worx

Worx WX394.91 Instrukcja

5 Października 2024
Worx

Worx WX370.1 Instrukcja

5 Października 2024
Worx

Worx WX352 Instrukcja

5 Października 2024
Worx

Worx WX272 Instrukcja

5 Października 2024
Worx

Worx WX394 Instrukcja

5 Października 2024
Worx

Worx WX381.9 Instrukcja

4 Października 2024
Worx

Worx WX177.9 Instrukcja

4 Października 2024
Worx

Worx WX381 Instrukcja

4 Października 2024

Instrukcje Wiertarka

Najnowsze instrukcje dla Wiertarka

Bosch

Bosch GRC 12V-60 Professional Instrukcja

12 Marca 2025
DeWalt

DeWalt dc987ka Instrukcja

15 Stycznia 2025
AEG

AEG KH 28 Super XE Instrukcja

14 Stycznia 2025
Makita

Makita HR2631FTX4 Instrukcja

12 Stycznia 2025
Holzmann

Holzmann SB 4116HN Instrukcja

11 Stycznia 2025
Bavaria

Bavaria BCD 12/1 Instrukcja

11 Stycznia 2025
Black & Decker

Black & Decker PF126 Instrukcja

11 Stycznia 2025
Einhell

Einhell BT-ID 710 E Instrukcja

11 Stycznia 2025
MSW

MSW -DDM255 Instrukcja

10 Stycznia 2025
MSW

MSW -DDM152 Instrukcja

10 Stycznia 2025