Instrukcja obsługi Worx WG324

Worx nożyce do żywopłotu WG324

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Worx WG324 (56 stron) w kategorii nożyce do żywopłotu. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/56
WG324 WG324.X
Cordless Pruning Saw
Scie d’élagage sans fil
Sierra de podar inalámbrica
EN
F
ES
P02
P20
P34
Cordless Pruning Saw EN
3
TABLE OF CONTENTS
1. SAFETY INSTRUCTIONS
2. COMPONENT LIST
3. TECHNICAL DATA
4. INTENDED USE
5. ASSEMBLY
6. OPERATION
6. SAW MAINTENANCE
7. TROUBLESHOOTING TABLE
1. SAFETY INSTRUCTIONS
PRODUCT SAFETY
WARNING: Some dust created by power
sanding, sawing, grinding, drilling
and other construction activities contains
chemicals known to the state of California
to cause cancer, birth defects or other
reproductive harm. Some examples of these
chemicals are:
• Lead from lead-based paints;
• Crystalline silica from bricks and cement and
other masonry products;
• Arsenic and chromium from chemically-
treated lumber.
Your risk from these exposures varies,
depending on how often you do this type
of work. To reduce your exposure to these
chemical: work in a well ventilated area, and
work with approved safety equipment, such as
those dust masks that are specially designed to
filter out microscopic particles.
WARNING: This product can expose you
to chemicals including lead and Di(2-
ethylhexyl)phthalate (DEHP) which are known
to the State of California to cause cancer and
birth defects or other reproductive harm. For
more information go to www.P65Warnings.
ca.gov.
GENERAL POWER TOOL
SAFETY WARNINGS
WARNING Read all safety warnings,
instructions, illustrations and
specifications provided with this power tool.
Failure to follow all instructions listed below may
result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future
reference.
The term “power tool” in the warnings refers to your
mains-operated (corded) power tool or battery-
operated (cordless) power tool.
1) Work area safety
a) Keep work area clean and well lit.
Cluttered or
dark areas invite accidents.
b) Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust.
Power tools
create sparks which may ignite the dust or fumes.
c) Keep children and bystanders away while
operating a power tool.
Distractions can cause
you to lose control.
2) Electrical safety
a) Power tool plugs must match the outlet.
Never modify the plug in any way. Do not use
any adapter plugs with earthed (grounded)
power tools.
Unmodified plugs and matching
outlets will reduce risk of electric shock.
b) Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges
and refrigerators.
There is an increased risk
of electric shock if your body is earthed or
grounded.
c) Do not expose power tools to rain or wet
conditions.
Water entering a power tool will
increase the risk of electric shock.
d) Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power
tool. Keep cord away from heat, oil, sharp
edges or moving parts.
Damaged or entangled
cords increase the risk of electric shock.
e) When operating a power tool outdoors, use
an extension cord suitable for outdoor use.
Use of a cord suitable for outdoor use reduces the
risk of electric shock.
f) If operating a power tool in a damp location
is unavoidable, use a residual current device
(RCD) protected supply.
Use of an RCD reduces
the risk of electric shock.
3) Personal safety
a) Stay alert, watch what you are doing and
use common sense when operating a power
tool. Do not use a power tool while you are
tired or under the influence of drugs, alcohol
or medication.
A moment of inattention while
operating power tools may result in serious
personal injury.
b) Use personal protective equipment. Always
wear eye protection.
Protective equipment
such as dust mask, non-skid safety shoes, hard
hat, or hearing protection used for appropriate
conditions will reduce personal injuries.
c) Prevent unintentional starting. Ensure
the switch is in the off-position before
connecting to power source and/or battery
pack, picking up or carrying the tool.
Carrying
power tools with your finger on the switch or

Specyfikacje produktu

Marka: Worx
Kategoria: nożyce do żywopłotu
Model: WG324

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Worx WG324, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje nożyce do żywopłotu Worx

Worx

Worx WG286 Instrukcja

25 Września 2024
Worx

Worx WG286.9 Instrukcja

25 Września 2024
Worx

Worx WG263 Instrukcja

25 Września 2024
Worx

Worx WG284.1 Instrukcja

25 Września 2024
Worx

Worx WG324 Instrukcja

8 Września 2024
Worx

Worx WG268 Instrukcja

19 Sierpnia 2024
Worx

Worx WG212E Instrukcja

9 Sierpnia 2024
Worx

Worx WG200E Instrukcja

9 Sierpnia 2024
Worx

Worx WG261E Instrukcja

6 Sierpnia 2024
Worx

Worx WG284E.9 Instrukcja

5 Lipca 2024

Instrukcje nożyce do żywopłotu

Najnowsze instrukcje dla nożyce do żywopłotu

Kibani

Kibani WPET1206 - XXL Instrukcja

15 Października 2024
Tanaka

Tanaka THT-2000SB Instrukcja

15 Października 2024
Black & Decker

Black & Decker BHT518 Instrukcja

14 Października 2024
MacAllister

MacAllister MHTP24EB Instrukcja

13 Października 2024
Husqvarna

Husqvarna 226HS99S Instrukcja

12 Października 2024
Husqvarna

Husqvarna 122HD60 Instrukcja

11 Października 2024
Florabest

Florabest FHT 600 B2 Instrukcja

11 Października 2024
Ozito

Ozito PXCGSS-018 Instrukcja

10 Października 2024
Einhell

Einhell Royal HEC 551 Instrukcja

9 Października 2024
Dolmar

Dolmar HT-2460 Instrukcja

9 Października 2024