Instrukcja obsługi Worx Nitro WX542.9

Worx piła Nitro WX542.9

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Worx Nitro WX542.9 (16 stron) w kategorii piła. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/16
SAFETY AND OPERATING MANUAL
ORIGINAL INSTRUCTIONS
3
TABLE OF CONTENTS
1. PRODUCT SAFTY
2. COMPONENT LIST
3. TECHNICAL DATA
4. OPERATING INSTRUCTIONS
5. WORKING HINTS FOR YOUR JIGSAW
6. MAINTENANCE
7. TROUBLESHOOTING
8. ENVIRONMENTAL PROTECTION
9. DECLARATION OF CONFORMITY
1. PRODUCT SAFETY
GENERAL POWER TOOL
SAFETY WARNINGS
WARNING: Read all safety warnings,
instructions, illustrations and
specifications provided with this power tool.
Failure to follow all instructions listed below may
result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future
reference.
The term “power tool” in the warnings refers to your
mains-operated (corded) power tool or battery-
operated (cordless) power tool.
1. WORK AREA SAFETY
a) Keep work area clean and well lit.
Cluttered or
dark areas invite accidents.
b) Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust.
Power tools
create sparks which may ignite the dust or fumes.
c) Keep children and bystanders away while
operating a power tool.
Distractions can cause
you to lose control.
2. ELECTRICAL SAFETY
a) Power tool plugs must match the outlet.
Never modify the plug in any way. Do not use
any adapter plugs with earthed (grounded)
power tools.
Unmodified plugs and matching
outlets will reduce risk of electric shock.
b) Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges
and refrigerators.
There is an increased risk of
electric shock if your body is earthed or grounded.
c) Do not expose power tools to rain or wet
conditions.
Water entering a power tool will
increase the risk of electric shock.
d) Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power
tool. Keep cord away from heat, oil, sharp
edges or moving parts.
Damaged or entangled
cords increase the risk of electric shock.
e) When operating a power tool outdoors, use
an extension cord suitable for outdoor use.
Use of a cord suitable for outdoor use reduces the
risk of electric shock.
f) If operating a power tool in a damp location
is unavoidable, use a residual current device
(RCD) protected supply.
Use of an RCD reduces
the risk of electric shock.
3. PERSONAL SAFETY
a) Stay alert, watch what you are doing and
use common sense when operating a power
tool. Do not use a power tool while you are
tired or under the influence of drugs, alcohol
or medication.
A moment of inattention while
operating power tools may result in serious
personal injury.
b) Use personal protective equipment. Always
wear eye protection.
Protective equipment
such as dust mask, non-skid safety shoes, hard
hat, or hearing protection used for appropriate
conditions will reduce personal injuries.
c) Prevent unintentional starting. Ensure
the switch is in the off-position before
connecting to power source and/or battery
pack, picking up or carrying the tool.
Carrying
power tools with your finger on the switch or
energising power tools that have the switch on
invites accidents.
d) Remove any adjusting key or wrench before
turning the power tool on.
A wrench or a key
left attached to a rotating part of the power tool
may result in personal injury.
e) Do not overreach. Keep proper footing and
balance at all times.
This enables better control
of the power tool in unexpected situations.
f) Dress properly. Do not wear loose clothing or
jewellery. Keep your hair and clothing away
from moving parts.
Loose clothes, jewellery or
long hair can be caught in moving parts.
g) If devices are provided for the connection
of dust extraction and collection facilities,
ensure these are connected and properly
used.
Use of dust collection can reduce dust-
related hazards.
h) Do not let familiarity gained from frequent
use of tools allow you to become complacent
and ignore tool safety principles.
A careless
action can cause severe injury within a fraction of
a second.
4. POWER TOOL USE AND CARE
a) Do not force the power tool. Use the correct
power tool for your application.
The correct
power tool will do the job better and safer at the

Specyfikacje produktu

Marka: Worx
Kategoria: piła
Model: Nitro WX542.9

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Worx Nitro WX542.9, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje piła Worx

Worx

Worx Nitro WX542.9 Instrukcja

29 Maja 2024
Worx

Worx WX520L Instrukcja

24 Maja 2024
Worx

Worx WG309 Instrukcja

23 Maja 2024
Worx

Worx WG384.9 Instrukcja

21 Maja 2024
Worx

Worx WX473 Instrukcja

17 Maja 2024
Worx

Worx JawSaw WG321 Instrukcja

12 Maja 2024
Worx

Worx WX423.1 Instrukcja

10 Maja 2024
Worx

Worx WX845L Instrukcja

10 Maja 2024
Worx

Worx WX523L Instrukcja

6 Maja 2024
Worx

Worx WX812L.9 Instrukcja

6 Maja 2024

Instrukcje piła

Najnowsze instrukcje dla piła

HiKOKI

HiKOKI C10FSB Instrukcja

24 Października 2024
Alpha Tools

Alpha Tools BSL 750 Instrukcja

22 Października 2024
Alpha Tools

Alpha Tools PS 600 E Instrukcja

22 Października 2024
Alpha Tools

Alpha Tools MHK 500 Instrukcja

22 Października 2024
Alpha Tools

Alpha Tools PS 520E Instrukcja

22 Października 2024
Makita

Makita 4333 dwde Instrukcja

15 Października 2024
Makita

Makita 5103r Instrukcja

15 Października 2024
Meec Tools

Meec Tools 000-707 Instrukcja

6 Października 2024
Meec Tools

Meec Tools 004-907 Instrukcja

6 Października 2024
Kress

Kress 1400 DS Instrukcja

5 Października 2024