Instrukcja obsługi Workzone LCD699-2SC

Workzone Wiertarka akumulatorowa LCD699-2SC

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Workzone LCD699-2SC (16 stron) w kategorii Wiertarka akumulatorowa. Ta instrukcja była pomocna dla 11 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/16
User Manual
Original Instruction
Product
Info
www.powertoolsupport.com
Read all safety warnings and all instructions
thoroughly before operating this product.
IM ed2; 11/2017
54731
12V LITHIUM-ION
CORDLESS DRILL
WITH HAMMER
ACTION
* Please note the instructions in this manual
are applicable for either the Pink or Red drill.
Contents
QR codes take you where you want to go
quicky and easily
Whether you require product information, spare parts or accessories,
details on warranties or aftersales service, or if you want to watch
a product demonstration video, our QR codes will take you there in
no time at all.
What is a QR code?
A QR-code (QR=Quick Response) is a type of matrix that can be read
with a smartphone camera and that contains a link to a website or
contact details, for example.
Advantage: You are not required to manually enter a website address
or contact details.
How it works
To scan the QR code, all you need is a smartphone with QR codes reader
software and an Internet connection*. This type of software can be
downloaded for free from your smartphone’s app store.
Try it out now
Just scan the QR code with your smartphone and
nd out more about the Aldi product you have
purchased*.
* Depending on your tari you may be charged for the connection.
Pack contents / parts 2
Description of symbols 3
General safety warning 4
Additional Safety rules for chargers and batteries 10
Parts List 12
Important information – Product care 13
Fitting and removing the battery pack 14
Battery charging 15
2 Speed Gearbox 15
Using the Drill/driver 16
Drill/driver overload 16
Temperature cut out 17
Low voltage cut out 17
Forward/reverse switch 18
Adjustable torque 18
Using the Hammer function 18
Inserting and removing bits 19
Drill/driving 19
Drill/driving plastics and plastic coated chipboard 20
Drill/driving wood 20
Hammer drill operations 20
All drill/driving operations 20
LED Work Light 20
Chuck replacement 20
Side Belt clip 21
Cleaning 21
Maintenance 21
Warranty 22
Environmental protection 22
What your 5 year warranty means 23
Service Support 23
Accessories & after Sales Parts 23
FAQ/Troubleshooting 24
Specications 25
Product
Info
For Know How Videos, click on the
“Product Assistance” tab, then the
“How To Product Videos” link.
12v Lithium-ion Cordless Drill with Hammer Action
AFTER SALES SUPPORT
e-mail: help@powertoolsupport.com 1800 909 909
MODEL No.: LCD699-2SC • 11/2017 • 54731 (toll free)
4
Pack contents / parts
Congratulations on the purchase of your Workzone® Titanium 12V
Lithium-Ion Cordless Hammer Drill. When you open your packaging, rst
remove all items and check there are no parts damaged or missing. If you
nd anything wrong, do not operate the product until the parts have
been replaced or the fault has been rectied. Failure to do so could result
in serious personal injury.
NOTE: First time users or inexperienced operators pay particular attention
to the operation of the Cordless Hammer Drill, including details of starting
and stopping and correct use of the Cordless Hammer Drill on pages 16-
19, as well as the maintenance instructions on pages 22.
Intended use of the 12V Lithium-Ion Cordless Hammer Drill
NOTE: This product is for private domestic DIY use only.
It is not suitable for commercial or trade use.
This drill/driver is mainly used for drill/driving in wood or metal sheet,
hammer drilling into non aggregate concrete, and screwdriving. Use the
tool and accessories only for intended applications.
Contents of carton
1 x 12V Lithium-Ion Hammer
Drill/driver
2 x 12V Lithium-Ion Batteries
1 x 1 Hour Charger
1 x Side Belt Clip (tted)
1 x Instruction manual
1 x Warranty Certicate
1 x Quick Start Guide
2 3
Description of symbols
The instruction manual, rating plate, or on the product itself, may show
these symbols. These represent important information about the product
or instructions on its use.
Wear eye protection.
Wear ear protectors when impact drilling.
Exposure to noise can cause hearing loss.
Regulatory Compliance Mark. Appliance complies with
requirements of electrical approval & EMC in Australia.
Read the instruction manual.
Waste electrical products should not
be disposed of with household waste.
Lithium-Ion Battery
Li ion Battery recycle.
Do Not dispose of in household waste.
Ready for use in 1 Hour.
Do not put in water.
Caution/Warning:
Read all safety warnings and all instructions.
Do not crush, disassemble, short terminals or dispose in re;
there is a risk of burns explosion or re.
Do not charge the battery pack if the ambient temperature is less than 0°C
or greater than 45°C.
Double insu lated for additional protection.
Indoor use.
2A Fuse.
60 Month Warranty
Li-iON

Specyfikacje produktu

Marka: Workzone
Kategoria: Wiertarka akumulatorowa
Model: LCD699-2SC

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Workzone LCD699-2SC, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Wiertarka akumulatorowa Workzone

Workzone

Workzone T12VW Instrukcja

4 Lipca 2024
Workzone

Workzone LCD699-2SC Instrukcja

4 Lipca 2024
Workzone

Workzone CDT214XA Instrukcja

3 Lipca 2024

Instrukcje Wiertarka akumulatorowa

Najnowsze instrukcje dla Wiertarka akumulatorowa

Einhell

Einhell BAS 12 Vario Instrukcja

14 Października 2024
Einhell

Einhell BAS 14.4-2-1H Instrukcja

14 Października 2024
Batavia

Batavia BT-CBCD001 - 7062722 Instrukcja

28 Września 2024
PowerPlus

PowerPlus POW30644 Instrukcja

28 Września 2024
PowerPlus

PowerPlus POW30646 Instrukcja

28 Września 2024
PowerPlus

PowerPlus POW30633 Instrukcja

28 Września 2024
Python

Python AC 12.0 KV Instrukcja

27 Września 2024
Metabo

Metabo BS 18 LTX BL QI Instrukcja

26 Września 2024
Bruder Mannesmann

Bruder Mannesmann 17815 Instrukcja

26 Września 2024
EasyMaxx

EasyMaxx Z 04344 - HL-S36-30L Ergo Plus Instrukcja

26 Września 2024