Instrukcja obsługi Workzone Heavy Duty Chipboard Shelving

Workzone Niesklasyfikowane Heavy Duty Chipboard Shelving

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Workzone Heavy Duty Chipboard Shelving (8 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/8
DESCRIPTION OF SIGNAL WORDS
WARNING indicates a hazardous
situation that, if not avoided, could
result in death or serious injury.
CAUTION indicates a hazardous
situation that, if not avoided, could
result in minor or moderate injury.
NOTICE indicates information
considered important, but not
hazardrelated (e.g. messages
related to property damage).
Heavy Duty Shelving Unit
Introduction
Congratulations on the purchase of your new
shelving unit. You have purchased a high-quality
shelving unit. Please familiarize yourself with the
shelving unit before assembling it. Read and follow these
assembly instructions and the safety messages. Only use
the shelving unit as specied and for the indicated pur-
poses. Keep these assembly instructions in a safe loca-
tion. If you pass the shelving unit on to others, always
include these assembly instructions.
Intended Use
The shelving unit is intended for storage. The shelving
unit is only intended for private indoor use. Use only the
enclosed mounting hardware and never modify the shelv-
ing unit since this can result in injuries and / or damage the
shelving unit. The manufacturer assumes no liability for in-
juries and damage due to improper use. The shelving unit
is not intended for commercial use.
Never leave children unattended! The shelving
unit is not intended for climbing or playing! Do not allow
people, especially children, to climb on or lean against
the shelving unit. This may result in death, injuries
and / or damage.
Contents / Parts Description
8 x 1 Upright
10 x 2 Cross piece (35.59 inch x 20.67 inch/
904 mm x 52.5 mm)
10 x 3 Cross piece (17.48 inch x 20.67 inch/
444 mm x 52.5 mm)
8 x 4 Connector piece
8 x 5 End cap
5 x 6 Shelf
2 x 7 Countersunk head screw (6 x 1.97 inch/6 x 50 mm)
2 x 8 Plain washer
2 x 9 Dowel
9 8 7
5 46
3
3
122
Dimensions / Material
The heavy duty shelving unit can be assembled
vertically or horizontally.
Vertical assembly:
36.22 x 70.86 x 18.11 inch /
92 x 180 x 46 cm
Horizontal
assembly:
70.86 x 36.22 x 18.11 inch /
180 x 92 x 46 cm
Material:
Shelves: wood
Braces, connectors,
crossbars: metal
HEAVY DUTY SHELVING UNIT
Assembly instructions 01 / 17
The arrows indicate work steps you have to take.
AFTER SALES SUPPORT
Model: Heavy Duty Shelving Unit 305 704 3882 www.tkt-usa.com
Corner brackets: plastic
Maximum weight: 385.80 lbs / 175 kg per shelf
Safety Notices
KEEP ALL SAFETY MESSAGES AND INSTRUCITONS
FOR FUTURE REFERENCE!
–
Never leave children unsupervised with the
packaging material. Suffocation hazard. Keep
the shelving unit out of the reach of children. The shelving
unit is not a toy.
– Make sure you will not be drilling into electrical, gas or
water lines inside the wall. Death or injury due to elec-
tric shock may otherwise result!
– Always wear safety gloves to protect hands
from cuts, pinching and bruising.
– Verify that all assembly hardware is undamaged and
the shelving unit is assembled correctly.
–
385.80 lbs
Never exceed the maximum load of 385.80 lbs
per shelf. Otherwise the shelving unit might
break or collapse and cause death, injuries
or damage.
– The post with the weight limit must be installed in plain
sight (front). Exceeding the weight limit may cause
the shelving unit to collapse or tip, resulting in
death, injuries and / or damage to the shelving unit!
– Make sure the person assembling the shelving unit has
read the assembly instructions. If assembled incor-
rectly, the shelving unit may collapse or tip, result-
ing in death or injuries!
– Always set up the shelving unit on solid, level ground.
The shelving unit may otherwise tip, possibly re-
sulting in death or injuries!
– Verify the shelving unit is sturdy before using it.
The shelving unit may otherwise collapse or tip,
possibly resulting in death or injuries!
– Always spread the load evenly – do not overload.
The shelving unit may otherwise collapse or tip,
possibly resulting in death or injuries!
– After assembly, verify all parts are connected rmly.
The shelving unit may otherwise collapse or tip,
possibly resulting in death or injuries!
– Anchor the shelving unit securely to the wall! The
shelving unit may otherwise tip, possibly resulting
in death or injuries!
– Before anchoring, verify the wall will support the shelv-
ing unit. When in doubt, consult a licensed contractor.
The shelving unit may otherwise tip, possibly
resulting in death or injuries!
– Wall-mounting hardware ( 7, 8) suitable for standard
solid brickwork are included. The type of screw required
varies by wall construction. Always use screws and
mounting hardware suitable for the actual wall. Other-
wise the shelving unit may tip potentially resulting
in death or injuries!
Assembly
The heavy duty shelving unit can be assembled vertically or
horizontally.
vertical horizontal
Assembly and anchoring in the wall
You will need the following tools (not included):
· Philips head screwdriver
· Power drill
· for brick walls: ⅜ masonry bit
· for walls with studs (2 x 4): 1/8 wood drill bit
· Rubber mallet
Vertical assembly
Step 1
– Always wear safety gloves to protect hands
from cuts, pinching and bruising.
Attach corner brackets 5 to the posts 1 to
prevent scratching the oor.
Attach 2 long crossbars 2 and 2 short crossbars 3 to
the posts 1 by inserting them in the designated notches
and carefully tapping in place with a rubber mallet.
HEAVY DUTY SHELVING UNIT
Assembly instructions
01 / 17
AFTER SALES SUPPORT
Model: Heavy Duty Shelving Unit www.tkt-usa.com 305 704 3882
1
2
5
2
3
5
Step 1
When installing the crossbars 2, 3, make sure the
support edge for the shelves 6 is facing up. Installing the
crossbars incorrectly may affect the safety and function.
Step 2
Install the connectors 4 into the posts 1 from the top
and tap in place with a rubber mallet. Install another
post 1 on each connector 4 and carefully tap in place
with a rubber mallet.
4
1 1
Step 2
– Install the post 1 with the weight limit sticker so that
the weight limit sticker is visible from the front. Exceed-
ing the weight limit may result in death, injuries and / or
damage to the shelving unit because the shelving unit
may tip over or collapse.
Step 3
Now install the remaining crossbars 2, 3 at the de-
sired height as described in step 1.
1
2
Step 3
Horizontal assembly
Step 1
– Always wear safety gloves to protect hands
from cuts, pinching and bruising.
Attach corner brackets 5 to the posts 1 to
prevent scratching the oor.
Attach 2 long crossbars 2 and 2 short crossbars 3 to
the posts 1 by inserting them in the designated notches
and carefully tapping in place with a rubber mallet.
1
2
5
2
3
5
Step 1
HEAVY DUTY SHELVING UNIT
Assembly instructions
01 / 17
AFTER SALES SUPPORT
Model: Heavy Duty Shelving Unit www.tkt-usa.com 305 704 3882

Specyfikacje produktu

Marka: Workzone
Kategoria: Niesklasyfikowane
Model: Heavy Duty Chipboard Shelving

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Workzone Heavy Duty Chipboard Shelving, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Niesklasyfikowane Workzone

Workzone

Workzone WW 152 Instrukcja

3 Października 2024
Workzone

Workzone WW 154 Instrukcja

3 Października 2024
Workzone

Workzone WW 151 Instrukcja

3 Października 2024
Workzone

Workzone WZEN 20 Instrukcja

3 Października 2024
Workzone

Workzone BT-CK 18 2B-1,5 KIT Instrukcja

3 Października 2024
Workzone

Workzone WZ-HT 50-2 Instrukcja

3 Października 2024
Workzone

Workzone BT-CK 18 Li Instrukcja

3 Października 2024
Workzone

Workzone Multifunction Tool WMW 300-2 Instrukcja

16 Września 2024
Workzone

Workzone 4.0 V Lithium-ion Cordless Screwdriver 44216 Instrukcja

16 Września 2024
Workzone

Workzone 20V Li-Ion Circular Saw PT106401 Instrukcja

15 Września 2024

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

Black Diamond

Black Diamond BD1121530000ALL1 Instrukcja

15 Października 2024
Husqvarna

Husqvarna K 970 SmartGuard Instrukcja

15 Października 2024
Stihl

Stihl HT 70 Instrukcja

15 Października 2024
Ernesto

Ernesto H14270 Instrukcja

15 Października 2024
Uniden

Uniden BT MIC KIT Instrukcja

15 Października 2024
Vaude

Vaude Omnis Bike 26 Instrukcja

15 Października 2024
ART

ART ProChannel II Instrukcja

15 Października 2024
Aukey

Aukey DR02J Instrukcja

15 Października 2024
Master Lock

Master Lock 653EURD Instrukcja

15 Października 2024
Roland

Roland FR-18 Diatonic Instrukcja

15 Października 2024